Error with my UB - GSM-Forum

firm · 03-01-2012, 13:49

I installed UB evrything is fine but there is only one problem when i hit flash it said this: Terminated with error : RX High after powerup [no phone/faulty cable. Please help.

MobilesDoctor · 03-01-2012, 15:24

Flash your phone by USB Cable.

firm · 03-05-2012, 08:17

Same error with usb also.

xerraco · 03-05-2012, 09:50

Post your log mate...

firm · 03-05-2012, 13:47

MCU Nokia Version: 1.132, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: rm237__07.30.mcusw 14 816 kB
Speed: [3250k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [0103192101001101, 010C192101001101]
Input power: 11.85V OK.
Output power at Line1 4.07V is in range of: 4.00V ±10.0%
Input power: 10.86V OK.
Output power at Line1 4.07V is in range of: 4.00V ±10.0%
--------------------------------------------------------------------------------
TBB5FlashPhoneThread 2.9.7.2928 finished at: 2012/03/05 18:08:15

Terminated with error: RX High after powerup (no phone/faulty cable), probably bad cable [7F000002].7E000117.00000102.0000020C.000110A6.0001115E.0001 1160.00011176.000115E0
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->UniversalBox

firm · 03-06-2012, 09:33

Need help now badly or should I buy other products if UB Suck.

MobilesDoctor · 03-06-2012, 11:08

Quote:

Originally Posted by firm

MCU Nokia Version: 1.132, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: rm237__07.30.mcusw 14 816 kB
Speed: [3250k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [0103192101001101, 010C192101001101]
Input power: 11.85V OK.
Output power at Line1 4.07V is in range of: 4.00V ±10.0%
Input power: 10.86V OK.
Output power at Line1 4.07V is in range of: 4.00V ±10.0%
--------------------------------------------------------------------------------
TBB5FlashPhoneThread 2.9.7.2928 finished at: 2012/03/05 18:08:15

Terminated with error: RX High after powerup (no phone/faulty cable), probably bad cable [7F000002].7E000117.00000102.0000020C.000110A6.0001115E.0001 1160.00011176.000115E0
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->UniversalBox

Quote:

Originally Posted by firm

Need help now badly or should I buy other products if UB Suck.

Just Use USB Mode Flashing to get this Phone sorted, cause Fbus is doesn't work,

firm · 03-06-2012, 12:25

I Tried each n every way. USB and all r the same just cant flash. The only thing I see is Rx high after pwrup. Both USB and Cable.

MobilesDoctor · 03-06-2012, 12:27

Quote:

Originally Posted by firm

I Tried each n every way. USB and all r the same just cant flash. The only thing I see is Rx high after pwrup. Both USB and Cable.

Might be your phone has a hardware fault,

firm · 03-06-2012, 13:37

Thanks for your time. I have 100 n more phone here but same problem. This fault is from the box or maybe windows 7. 32bit or drivers but not phones.

fatafi · 03-06-2012, 13:52

Use windows XP is better
we don't have any problem with UB
we unlock and flash all mobiles without problem
or use cable RX

MobilesDoctor · 03-06-2012, 14:05

Quote:

Originally Posted by firm

Thanks for your time. I have 100 n more phone here but same problem. This fault is from the box or maybe windows 7. 32bit or drivers but not phones.

Well, I refer you to use Windows Xp Professional Service Pack3 to safe
your self from lot of errors,

03-01-2012, 13:49	#1 (permalink)
firm Junior Member Join Date: Jan 2010 Posts: 6 Member: 1206296 Status: Offline Thanks Meter: 0	Error with my UB I installed UB evrything is fine but there is only one problem when i hit flash it said this: Terminated with error : RX High after powerup [no phone/faulty cable. Please help.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help: Forgot my 6110 user lock code!!	GByte9	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	02-26-2016 14:52
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

03-01-2012, 15:24	#2 (permalink)
MobilesDoctor No Life Poster Join Date: Oct 2004 Location: IRELAND Posts: 14,215 Member: 87357 Status: Offline Thanks Meter: 9,457	Flash your phone by USB Cable.

03-05-2012, 08:17	#3 (permalink)
firm Junior Member Join Date: Jan 2010 Posts: 6 Member: 1206296 Status: Offline Thanks Meter: 0	Same error with usb also.

03-05-2012, 09:50	#4 (permalink)
xerraco No Life Poster Join Date: Nov 2008 Location: RVIII Posts: 11,696 Member: 890926 Status: Offline Thanks Meter: 2,053	Post your log mate...

03-05-2012, 13:47	#5 (permalink)
firm Junior Member Join Date: Jan 2010 Posts: 6 Member: 1206296 Status: Offline Thanks Meter: 0	MCU Nokia Version: 1.132, and up to date. SMCU Nokia Version: 1.44, and up to date. Flashing file: BB5 [BB5 ALGORITHM] MCU File: rm237__07.30.mcusw 14 816 kB Speed: [3250k, 6500k, 6500k, 98k] Baud. Supported Hardwares: [0103192101001101, 010C192101001101] Input power: 11.85V OK. Output power at Line1 4.07V is in range of: 4.00V ±10.0% Input power: 10.86V OK. Output power at Line1 4.07V is in range of: 4.00V ±10.0% -------------------------------------------------------------------------------- TBB5FlashPhoneThread 2.9.7.2928 finished at: 2012/03/05 18:08:15 Terminated with error: RX High after powerup (no phone/faulty cable), probably bad cable [7F000002].7E000117.00000102.0000020C.000110A6.0001115E.0001 1160.00011176.000115E0 MCU Boot Version: 1.069, and up to date. SMCU Boot Version: 1.34, and up to date. Device opened at USB->UniversalBox

03-06-2012, 09:33	#6 (permalink)
firm Junior Member Join Date: Jan 2010 Posts: 6 Member: 1206296 Status: Offline Thanks Meter: 0	Need help now badly or should I buy other products if UB Suck.

03-06-2012, 12:25	#8 (permalink)
firm Junior Member Join Date: Jan 2010 Posts: 6 Member: 1206296 Status: Offline Thanks Meter: 0	I Tried each n every way. USB and all r the same just cant flash. The only thing I see is Rx high after pwrup. Both USB and Cable.

03-06-2012, 13:37	#10 (permalink)
firm Junior Member Join Date: Jan 2010 Posts: 6 Member: 1206296 Status: Offline Thanks Meter: 0	Thanks for your time. I have 100 n more phone here but same problem. This fault is from the box or maybe windows 7. 32bit or drivers but not phones.

03-06-2012, 13:52	#11 (permalink)
fatafi Freak Poster Join Date: Oct 2011 Location: .::StarCodes::. Posts: 148 Member: 1669858 Status: Offline Sonork: 100.1609806 Thanks Meter: 27	Use windows XP is better we don't have any problem with UB we unlock and flash all mobiles without problem or use cable RX