C62 don't flashing on all versions - GSM-Forum

ejik · 10-26-2005, 18:59

With a cable it's OK
It is made on с62 manual and if it is necessary a current 12V moves a power unit
At attempt to update or downgrade ERROR
What can be?

hayeap · 10-27-2005, 17:41

Sir,
Double check the cable is 100% correct ,
the diagram is 100% working ,maybe try made another cable
maybe cable wire problem
hope yo find out the problem

ejik · 10-27-2005, 19:03

Cable OK
Repair and unlock working fine
But Flashing,WriteOTP and Recovery NOT WORKING an all my phones

FLASHING LOG

Siemens C62 Software File: HD0503-097-001-M.SSW 4963,4kB.
Siemens C62 Language File: HD0503-LNG-097-M-91.SSW 690,4kB.
Siemens C62 Customization File: HD0503-FFS-097-M-132.SSW 647,1kB.
Siemens C62 GDFS File: HD0503-097-M-132.cus 138 fields.
MCU Siemens Version: 1.042, and up to date.
SMCU Siemens Version: 1.14, and up to date.
Output power at Line1 4,20V is in range of: 4,00V ±10,0%
Output power at Line2 4,41V is in range of: 5,00V ±25,0%
Serial line 1 speed changed to 920kBaud.
Loader version: 030820 1707 BACCXC1326185_SERVICE_LOADER R2E
First FlashID: 2010; Size: 8 MBytes
Flashing software file: HD0503-097-001-M
Terminated with error: 0002E010. 00024310. 00030240

Recovery LOG

MCU Siemens Version: 1.042, and up to date.
SMCU Siemens Version: 1.14, and up to date.
Output power at Line1 4,18V is in range of: 4,00V ±10,0%
Output power at Line2 4,41V is in range of: 5,00V ±25,0%
Serial line 1 speed changed to 920kBaud.
Loader version: 030820 1010 BACCXC1325345_RECOVERY_LOADER R3A
First FlashID: 2010; Size: 8 MBytes
Terminated with error: 0002E010. 00024310. 00030410

WRITE OPT LOG

MCU Siemens Version: 1.042, and up to date.
SMCU Siemens Version: 1.14, and up to date.
Output power at Line1 4,18V is in range of: 4,00V ±10,0%
Output power at Line2 4,41V is in range of: 5,00V ±25,0%
Serial line 1 speed changed to 920kBaud.
Loader version: 030820 1707 BACCXC1326185_SERVICE_LOADER R2E
First FlashID: 2010; Size: 8 MBytes
Terminated with error: 000301B0. 00030100

**Kima** · 10-27-2005, 22:29

Try with some Hotair station to flue flash chip...This is common problem
with C62...And after this try again...
If you have network problem, Hotair will solve problem...

b/r KIMA

10-26-2005, 18:59	#1 (permalink)
ejik Insane Poster Join Date: Nov 2004 Posts: 87 Member: 91762 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	C62 don't flashing on all versions With a cable it's OK It is made on с62 manual and if it is necessary a current 12V moves a power unit At attempt to update or downgrade ERROR What can be?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
*New UpdateC62 FULL unlock/flash/repair ALL versions**	Kima	Universalbox	0	06-24-2005 20:21
Winimei for E700 does not work on all versions???	Burnt Cobba	SYSOL Platform	10	05-27-2004 16:24
Guide to making Z7 software 100% on all versions!	CompleteFone	Sony	13	03-09-2002 04:09
Unlock and flash T205 all versions.	omegagsm	ODM (Original Design Manufacturing)	1	11-10-2001 22:02

10-27-2005, 17:41	#2 (permalink)
hayeap Freak Poster Join Date: Sep 2001 Location: Malaysia Age: 45 Posts: 249 Member: 6443 Status: Offline Thanks: 8 Thanked 60 Times in 13 Posts	Sir, Double check the cable is 100% correct , the diagram is 100% working ,maybe try made another cable maybe cable wire problem hope yo find out the problem

10-27-2005, 19:03	#3 (permalink)
ejik Insane Poster Join Date: Nov 2004 Posts: 87 Member: 91762 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Cable OK Repair and unlock working fine But Flashing,WriteOTP and Recovery NOT WORKING an all my phones FLASHING LOG Siemens C62 Software File: HD0503-097-001-M.SSW 4963,4kB. Siemens C62 Language File: HD0503-LNG-097-M-91.SSW 690,4kB. Siemens C62 Customization File: HD0503-FFS-097-M-132.SSW 647,1kB. Siemens C62 GDFS File: HD0503-097-M-132.cus 138 fields. MCU Siemens Version: 1.042, and up to date. SMCU Siemens Version: 1.14, and up to date. Output power at Line1 4,20V is in range of: 4,00V ±10,0% Output power at Line2 4,41V is in range of: 5,00V ±25,0% Serial line 1 speed changed to 920kBaud. Loader version: 030820 1707 BACCXC1326185_SERVICE_LOADER R2E First FlashID: 2010; Size: 8 MBytes Flashing software file: HD0503-097-001-M Terminated with error: 0002E010. 00024310. 00030240 Recovery LOG MCU Siemens Version: 1.042, and up to date. SMCU Siemens Version: 1.14, and up to date. Output power at Line1 4,18V is in range of: 4,00V ±10,0% Output power at Line2 4,41V is in range of: 5,00V ±25,0% Serial line 1 speed changed to 920kBaud. Loader version: 030820 1010 BACCXC1325345_RECOVERY_LOADER R3A First FlashID: 2010; Size: 8 MBytes Terminated with error: 0002E010. 00024310. 00030410 WRITE OPT LOG MCU Siemens Version: 1.042, and up to date. SMCU Siemens Version: 1.14, and up to date. Output power at Line1 4,18V is in range of: 4,00V ±10,0% Output power at Line2 4,41V is in range of: 5,00V ±25,0% Serial line 1 speed changed to 920kBaud. Loader version: 030820 1707 BACCXC1326185_SERVICE_LOADER R2E First FlashID: 2010; Size: 8 MBytes Terminated with error: 000301B0. 00030100

10-27-2005, 22:29	#4 (permalink)
Kima Product Manager Join Date: Jul 2001 Location: Universalbox Age: 40 Posts: 745 Member: 5144 Status: Offline Thanks: 0 Thanked 19 Times in 7 Posts	Try with some Hotair station to flue flash chip...This is common problem with C62...And after this try again... If you have network problem, Hotair will solve problem... b/r KIMA