::cant unlock any bb5 phones:: ANSWERED
 

hi ub team,

please i am very confused,i cant unlock any bb5 phones,i just purchased the box full activated,update is ready cable is ready i do all things but still cant success,always same error after read pm message


here is log


TBB5PatchUnlockThread 2.8.5.2522 started at: 2010/03/27 18:06:11
--------------------------------------------------------------------------------
MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Reading Info...
Soft Version: V 04.22 Date: 02-11-07 Type: RM-122 (6110N-1 NAVIGATOR) Pack: (c) Nokia
Product code: 0558850
Product code: 0544248
Radio: GSM850 / GSM900 / GSM1800 / GSM1900 / WCDMA I
Original IMEI: 356250-00-********
Production serial: COJ600743
HW Version: 1904
DSP Version: 06w41pb_07w42.0.1_rm122
LCD Version:
APE ADSP Version: 256
SIMLock service: SIMLOCK SERVER [010000060C08]
Profile bits: 8000000000000000
Simlock config: 2140700000000000
Invalid codes entered: 0 / 0
Block: 1; Lock: 1; State: Closed; Data: 21407F
Block: 2; Lock: 1; State: Closed; Data: 21402F
Security code: 12345
Reading PM...
Input power: 4,63V OK.
--------------------------------------------------------------------------------
TBB5PatchUnlockThread 2.8.5.2522 finished at: 2010/03/27 18:06:44
Terminated with error: Output power at Line1 4,51V out of range of: 4,00V ±10,0% [00000C14].0001104A.000111C8
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->UniversalBox [UBFJMEVP]



please need advice what is wrong



GPG_SUPPORT

just use a power suply

First Click on Read Info. button, or keep press Power Button on the Phone,
when you see LOCAL MODE on Phones screen PRESS UNLOCK button,

YES i do all this steps,phone enter to local mode,information readed ok but after step reading pm i got message faild,power supplier is pluged,tested with many cables same problem, i use another interface phone is unlocked without any problems,


ps: ub is new and fully activated


hope find where is problem exactly

any help ub team!!!!,i need just to know if my ub have a hardware fault




GPG_SUPPORT

Check ur Power Supply!
This "Terminated with error: Output power at Line1 4,51V out of range of: 4,00V ±10,0% [00000C14].0001104A.000111C8"
happens when use without external stabel Powersupply!

Br

THX but tested with and without power supply

any other idea



GPG_SUPPORT

in my side it's box problem any way send private messege to mr.universalbox cuz he is the only who can help


b.r.

where is ub team? please need answer to my problem,i cant work with box aven its new,just give me good answer if box is damaged or other thing is fault



best regard and sorry for disturb




GPG_SUPPORT

Sorry to say, but don't know whats wrong with your box, i think it is not a general problem, because there are many other users without any problem...