error on my box not sure whats up? - GSM-Forum

caddisfly · 01-26-2006, 09:57

hi friend
my universalbox was working 100% fine for some time this morning...i get this error can anybody help?

universalbox · 01-26-2006, 13:50

Quote:

Originally Posted by ogre

hi friend
my universalbox was working 100% fine for some time this morning...i get this error can anybody help?

You have attached a rar with a html in it, and that html refers to an image, but no image exists. Please attach image directly and forget rar and any other things.

caddisfly · 01-26-2006, 15:53

sorry here is the error..problem uploading it

universalbox · 01-27-2006, 13:40

Quote:

Originally Posted by ogre

sorry here is the error..problem uploading it

When you start the software what it says for MCU version?

ba7bou7a · 01-27-2006, 13:58

hi , i have the same error and about mcu it said

universalbox · 01-27-2006, 14:02

Quote:

Originally Posted by ba7bou7a

hi , i have the same error and about mcu it said

It is the same picture sent by ogre. Do you have logging enabled? Would be nice to see the log file before and after the error appeared first time.

ba7bou7a · 01-27-2006, 14:33

if you are asking about support log-in so yes i can and yesterday the box was working fine and i did flash 32 phones of 7370 but today and sudinly i have this error and you should know that i did try to install the sw again this morning and in divice manager i have no erro .
if i try to update the box i have new error

EIGY · 01-27-2006, 19:29

I thinking this one same problem.
http://forum.gsmhosting.com/vbb/showthread.php?t=266804

B.R.
EIGY.

universalbox · 01-30-2006, 11:29

Quote:

Originally Posted by ba7bou7a

if you are asking about support log-in so yes i can and yesterday the box was working fine and i did flash 32 phones of 7370 but today and sudinly i have this error and you should know that i did try to install the sw again this morning and in divice manager i have no erro .
if i try to update the box i have new error

Send me the log please.

ba7bou7a · 01-30-2006, 18:19

i hope that this is what you are talking about as log file

universalbox · 01-30-2006, 18:58

Quote:

Originally Posted by ba7bou7a

i hope that this is what you are talking about as log file

No, log file is defferent from ini file. You can turn on logging on the "Setup" tab.

djssergy · 01-30-2006, 20:10

hey UB:
this is my error what tha hell is this?

extracted from log file:
MCU Nokia Version: 1.122, and up to date.
SMCU Nokia Version: 1.4, and up to date.
Warning! Input power 4,38V low, at least 4,50V needed!
Terminated with error: TX Low after BSI Low [7F000003]. 7E00011E. 00000102. 0000020C. 00011220. 0000040D. 00000101. 0000020C. 0001023A. 000110D0. 0001115A. 00011134
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.26, and up to date.
Device opened at USB->Universal Box [UBCDDAGR]
MCU Nokia Version: 1.122, and up to date.
SMCU Nokia Version: 1.4, and up to date.
Warning! Input power 4,38V low, at least 4,50V needed!
Terminated with error: TX Low after BSI Low [7F000003]. 7E00011E. 00000102. 0000020C. 00011220. 0000040D. 00000101. 0000020C. 0001023A. 000110D0. 0001115A. 00011134
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.26, and up to date.
Device opened at USB->Universal Box [UBCDDAGR]

i can not flash or change imei in most of the nokia phones(6800, 3220,6200,3595)..
what to do?

ba7bou7a · 01-31-2006, 08:23

no sorry i cann t help because it was terned off but problem still existe and can not use my box yet

universalbox · 01-31-2006, 13:43

Quote:

Originally Posted by djssergy

hey UB:
this is my error what tha hell is this?
extracted from log file:
MCU Nokia Version: 1.122, and up to date.
SMCU Nokia Version: 1.4, and up to date.
Warning! Input power 4,38V low, at least 4,50V needed!
Terminated with error: TX Low after BSI Low [7F000003]. 7E00011E. 00000102. 0000020C. 00011220. 0000040D. 00000101. 0000020C. 0001023A. 000110D0. 0001115A. 00011134
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.26, and up to date.
Device opened at USB->Universal Box [UBCDDAGR]
MCU Nokia Version: 1.122, and up to date.
SMCU Nokia Version: 1.4, and up to date.
Warning! Input power 4,38V low, at least 4,50V needed!
Terminated with error: TX Low after BSI Low [7F000003]. 7E00011E. 00000102. 0000020C. 00011220. 0000040D. 00000101. 0000020C. 0001023A. 000110D0. 0001115A. 00011134
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.26, and up to date.
Device opened at USB->Universal Box [UBCDDAGR]
i can not flash or change imei in most of the nokia phones(6800, 3220,6200,3595)..
what to do?

Cable problem, and not related to box or sw.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pm auth is not working on my box	ravin j tejura	Universalbox	0	12-30-2009 08:24
server error on my box	ryaz1993.	Universalbox	5	02-08-2009 09:01
what is reason this error in my box	REZAMAHMOODI	Universalbox	2	04-03-2007 09:25
Error, Error on my box.. Wat going on?	alex12345	Universalbox	5	04-16-2006 10:53
Not sure what phone is	inox	Motorola ODM	1	02-07-2004 09:30

01-27-2006, 19:29	#8 (permalink)
EIGY No Life Poster Join Date: Jun 2004 Location: Philippines http://www.pogi.ph Posts: 1,647 Member: 68075 Status: Offline Thanks Meter: 51	I thinking this one same problem. http://forum.gsmhosting.com/vbb/showthread.php?t=266804 B.R. EIGY.

01-30-2006, 20:10	#12 (permalink)
djssergy Freak Poster Join Date: May 2005 Age: 43 Posts: 134 Member: 147007 Status: Offline Thanks Meter: 8	hey UB: this is my error what tha hell is this? extracted from log file: MCU Nokia Version: 1.122, and up to date. SMCU Nokia Version: 1.4, and up to date. Warning! Input power 4,38V low, at least 4,50V needed! Terminated with error: TX Low after BSI Low [7F000003]. 7E00011E. 00000102. 0000020C. 00011220. 0000040D. 00000101. 0000020C. 0001023A. 000110D0. 0001115A. 00011134 MCU Boot Version: 1.069, and up to date. SMCU Boot Version: 1.26, and up to date. Device opened at USB->Universal Box [UBCDDAGR] MCU Nokia Version: 1.122, and up to date. SMCU Nokia Version: 1.4, and up to date. Warning! Input power 4,38V low, at least 4,50V needed! Terminated with error: TX Low after BSI Low [7F000003]. 7E00011E. 00000102. 0000020C. 00011220. 0000040D. 00000101. 0000020C. 0001023A. 000110D0. 0001115A. 00011134 MCU Boot Version: 1.069, and up to date. SMCU Boot Version: 1.26, and up to date. Device opened at USB->Universal Box [UBCDDAGR] i can not flash or change imei in most of the nokia phones(6800, 3220,6200,3595).. what to do?

01-31-2006, 08:23	#13 (permalink)
ba7bou7a No Life Poster Join Date: Nov 2004 Location: canada Posts: 500 Member: 89655 Status: Offline Thanks Meter: 25	no sorry i cann t help because it was terned off but problem still existe and can not use my box yet