GSM-Forum

GSM-Forum (http://forum.gsmhosting.com/vbb/)
-   Universalbox (http://forum.gsmhosting.com/vbb/f305/)
-   -   Error with my UB (http://forum.gsmhosting.com/vbb/f305/error-my-ub-1436826/)

firm 03-01-2012 12:49

Error with my UB
 
I installed UB evrything is fine but there is only one problem when i hit flash it said this: Terminated with error : RX High after powerup [no phone/faulty cable. Please help.

MobilesDoctor 03-01-2012 14:24

Flash your phone by USB Cable.

firm 03-05-2012 07:17

Same error with usb also.

xerraco 03-05-2012 08:50

Post your log mate...

firm 03-05-2012 12:47

MCU Nokia Version: 1.132, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: rm237__07.30.mcusw 14 816 kB
Speed: [3250k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [0103192101001101, 010C192101001101]
Input power: 11.85V OK.
Output power at Line1 4.07V is in range of: 4.00V 10.0%
Input power: 10.86V OK.
Output power at Line1 4.07V is in range of: 4.00V 10.0%
--------------------------------------------------------------------------------
TBB5FlashPhoneThread 2.9.7.2928 finished at: 2012/03/05 18:08:15

Terminated with error: RX High after powerup (no phone/faulty cable), probably bad cable [7F000002].7E000117.00000102.0000020C.000110A6.0001115E.0001 1160.00011176.000115E0
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->UniversalBox

firm 03-06-2012 08:33

Need help now badly or should I buy other products if UB Suck.

MobilesDoctor 03-06-2012 10:08

Quote:

Originally Posted by firm (Post 8205693)
MCU Nokia Version: 1.132, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: rm237__07.30.mcusw 14 816 kB
Speed: [3250k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [0103192101001101, 010C192101001101]
Input power: 11.85V OK.
Output power at Line1 4.07V is in range of: 4.00V 10.0%
Input power: 10.86V OK.
Output power at Line1 4.07V is in range of: 4.00V 10.0%
--------------------------------------------------------------------------------
TBB5FlashPhoneThread 2.9.7.2928 finished at: 2012/03/05 18:08:15

Terminated with error: RX High after powerup (no phone/faulty cable), probably bad cable [7F000002].7E000117.00000102.0000020C.000110A6.0001115E.0001 1160.00011176.000115E0
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->UniversalBox

Quote:

Originally Posted by firm (Post 8207959)
Need help now badly or should I buy other products if UB Suck.





Just Use USB Mode Flashing to get this Phone sorted, cause Fbus is doesn't work,

firm 03-06-2012 11:25

I Tried each n every way. USB and all r the same just cant flash. The only thing I see is Rx high after pwrup. Both USB and Cable.

MobilesDoctor 03-06-2012 11:27

Quote:

Originally Posted by firm (Post 8208491)
I Tried each n every way. USB and all r the same just cant flash. The only thing I see is Rx high after pwrup. Both USB and Cable.


Might be your phone has a hardware fault,

firm 03-06-2012 12:37

Thanks for your time. I have 100 n more phone here but same problem. This fault is from the box or maybe windows 7. 32bit or drivers but not phones.

fatafi 03-06-2012 12:52

Use windows XP is better
we don't have any problem with UB
we unlock and flash all mobiles without problem
or use cable RX

MobilesDoctor 03-06-2012 13:05

Quote:

Originally Posted by firm (Post 8208674)
Thanks for your time. I have 100 n more phone here but same problem. This fault is from the box or maybe windows 7. 32bit or drivers but not phones.



Well, I refer you to use Windows Xp Professional Service Pack3 to safe
your self from lot of errors,


All times are GMT +1. The time now is 05:37.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.23851 seconds with 5 queries

SEO by vBSEO