2600c unlock fail

[mickle1]

i have a 2600c i tried to unlock but it killed it i now need to flash it but the model isn't on the list how do i flash it

[dil_PAKISTANI]

Download flash files from server & check list again.I think files available on server,Post logs to check why phone dead?
To help you Br.
















Regards
Shoaib Electronics

[mickle1]

Originally Posted by dil_PAKISTANI

Download flash files from server & check list again.I think files available on server,Post logs to check why phone dead?
To help you Br.
















Regards
Shoaib Electronics

ok herMCU Nokia Version: 1.124, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Reading Info...
MCU Version: V 05.22 Date: 26-02-08 Type: RM-340 (Unknown) Additional_1: (c) Nokia
PPM Version: V 05.22 Date: 31-01-08 Type: RM-340 (Unknown) Additional_1: (c) Nokia Pack: AE
Product code: 0561362
Production serial: 7C5737829
Hardware version: 3001
Original IMEI: ******************
IMEI: ******************
Asic type: 11
Profile bits: 800000000001000B
Lockinfo: 2340000100000000
Lock version: 1
SIMLock service: SIMLOCK SERVER [010000060C08]
Writing SP info
Failed, patching software...
Connecting to server: US2
Asking service availability...
Connecting to server: US2
Credits: 194
Credits left: 194
Input power: 4.68V OK.
Hardware ID: 3162
Boot Loader: u3_2nd.fia 2 kB
Version: 4.69.0
Supported Hardwares: [3040, 2292, 3162, 3166, 316A]
Max Flash Devices: 2
Flash ID 1: 00EC2208 - 0000 Rev: 9121 Manufacturer: Samsung MSB: 01 SectorSize: 0x020000
Flash ID 2: 00EC2208 - 0000 Rev: 9121 Manufacturer: Samsung MSB: 02 SectorSize: 0x020000
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flash Loader: u3_amd.fia 29 kB
Version: 4.69.0
Supported Hardwares: [3040, 2292, 3162, 3166, 316A]
ASIC Type: 11
MSID: 84-B5D2E39365C1302CEBED2A83
CobbaID: 00D58B01; 3B8ADA60
FAID: A3B5F4141FC41ADF4F8F7D3D
Erase time: 0,9 sec.
Flashing file: RM-340_05.22.imp
Flash time: 10,5 sec.
After MCU Flash Delay: 5000 msec.
Total time: 28,8 sec.
Initializing phone...
Output power at Line1 3.93V is in range of: 4.00V ±10.0%
--------------------------------------------------------------------------------
TDCT4UnlockThread finished at: 2008/08/08 12:36:12

Terminated with error: 00010071.00015018.00011826.00011A88
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at US

[dadaunlocker]

past couple of days i have been tring too unlock these sets without any luck

after pressing the unlock button the unlock process starts it flash the first part with out any problem but gives error after that

now i have tried flashing it also but problems here too

it flashes mcu with no problems but when the second phase starts now the problem starts it gives error when flashing ucp saying bad faulty chip its doing the same thing when i flash 2630 too i think its a bug in the software

now i have unlocked one set 2600 c after it gone dead so i flashed just mcu only now it works but no tones themes pictures nothing

[MobilesDoctor]

@dadaunlocker

Bro , Please Can you post here screen shot or log file



Regards
F@iSaL

[mickle1]

Originally Posted by dadaunlocker

past couple of days i have been tring too unlock these sets without any luck

after pressing the unlock button the unlock process starts it flash the first part with out any problem but gives error after that

now i have tried flashing it also but problems here too

it flashes mcu with no problems but when the second phase starts now the problem starts it gives error when flashing ucp saying bad faulty chip its doing the same thing when i flash 2630 too i think its a bug in the software

now i have unlocked one set 2600 c after it gone dead so i flashed just mcu only now it works but no tones themes pictures nothing

when it say error entering boot mode would you like to try again press yes and hold the power button

[MobilesDoctor]

now i have unlocked one set 2600 c after it gone dead so i flashed just mcu only now it works but no tones themes pictures nothing

Flash with MCU+PPM+CNT and Use Easy Flash Cable . I hope your problem will be Ok


Regards
F@iSaL