plz help E65.rm-208 - GSM-Forum

bk.gsm · 09-08-2009, 21:55

hi ub team i have a problem with E65.rm-208 it's on contact retailer here is the log:

MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Initializing phone...
Output power at Line1 3.93V is in range of: 4.00V ±10.0%
Phone powered.
Reading Info...
Soft Version: V 3.0615.3 Date: 31-01-08 Type: RM-208 (E65) Pack: (c) Nokia.
Product code: 0515722
Product code: 0536849
WLAN MAC: 001FDF1E72FE
Radio: GSM850 / GSM900 / GSM1800 / GSM1900 / WCDMA I
Original IMEI: 358631-01-********
Production serial: SIH999506
HW Version: 0801
DSP Version: A06w14PB_07w42
LCD Version:
APE ADSP Version:
SIMLock service: SIMLOCK SERVER VERSION 63 [040A08060118]
Profile bits: 0000000000000000
Simlock config: 2440700000000000
Invalid codes entered: 0 / 0
Block: 1; Lock: 1; State: Open; Data: FFFFFF
Block: 2; Lock: 1; State: Open; Data: FFFFFF
Block: 3; Lock: 1; State: Open; Data: FFFFFF
Block: 4; Lock: 1; State: Open; Data: FFFFFF
Block: 5; Lock: 1; State: Open; Data: FFFFFF
Block: 6; Lock: 1; State: Open; Data: FFFFFF
Block: 7; Lock: 1; State: Open; Data: FFFFFF
All locks are open.
Security code: 12345

as u see all data is right what can i do for this problem plz help me?

note:i wrote all monifaded pm with pm auth

b.r.

bk.gsm · 09-09-2009, 08:05

hello ub moderater plz help me and here is the self test:

MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Reading Info...
Soft Version: V 3.0615.3 Date: 31-01-08 Type: RM-208 (E65) Pack: (c) Nokia.
Product code: 0515722
Product code: 0536849
WLAN MAC: 001FDF1E72FE
Radio: GSM850 / GSM900 / GSM1800 / GSM1900 / WCDMA I
Original IMEI: 358631-01-********
Production serial: SIH999506
HW Version: 0801
DSP Version: A06w14PB_07w42
LCD Version:
APE ADSP Version: 256
SIMLock service: SIMLOCK SERVER VERSION 63 [040A08060118]
Profile bits: 0000000000000000
Simlock config: 2440700000000000
Invalid codes entered: 0 / 0
Block: 1; Lock: 1; State: Open; Data: FFFFFF
Block: 2; Lock: 1; State: Open; Data: FFFFFF
Block: 3; Lock: 1; State: Open; Data: FFFFFF
Block: 4; Lock: 1; State: Open; Data: FFFFFF
Block: 5; Lock: 1; State: Open; Data: FFFFFF
Block: 6; Lock: 1; State: Open; Data: FFFFFF
Block: 7; Lock: 1; State: Open; Data: FFFFFF
All locks are open.
Security code: 12345
Executing self tests...
Passed [2E] ST_TAHVOINT_TEST
Passed [03] ST_UEM_CBUS_IF_TEST
No signal [0C] ST_EAR_DATA_LOOP_TEST
Passed [0D] ST_SIM_CLK_LOOP_TEST
Passed [21] ST_SIM_IO_CTRL_LOOP_TEST
Passed [5D] ST_SIM_LOCK_TEST
Passed [5A] ST_SECURITY_TEST
Passed [02] ST_PWR_KEY_TEST
Passed [14] ST_CURRENT_CONS_TEST
Passed [27] ST_BACKUP_BATT_TEST
Passed [3A] ST_WARRANTY_TEST
Passed [38] ST_CMT_APE_WAKEUP_TEST
Passed [60] ST_SLEEPCLK_FREQ_TEST
Passed [65] ST_HOOKINT_TEST
Passed [6C] ST_BTEMP_TEST
Passed [56] ST_EXT_DEVICE_TEST
Passed [53] ST_CDSP_RF_BB_IF_TEST
Passed [55] ST_CDSP_RF_SUPPLY_TEST
Passed [4A] ST_CDSP_TX_IQ_TEST
Passed [52] ST_CDSP_TXC_DATA_TEST
Passed [4F] ST_CDSP_PWR_DETECTOR_BIAS_TEST
Passed [50] ST_CDSP_RX_PLL_PHASE_LOCK_TEST
Passed [4B] ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Passed [51] ST_CDSP_WCDMA_TX_POWER_TEST
Passed [4D] ST_CDSP_RX_IQ_LOOP_BACK_TEST
Passed [06] ST_CDSP_GSM_TX_POWER_TEST
Passed [07] ST_IR_LOOP_TEST
Passed [15] ST_KEYBOARD_STUCK_TEST
Passed [16] ST_LPRF_IF_TEST
Passed [2C] ST_CAMERA_IF_TEST
Passed [3B] ST_LPRF_AUDIO_LINES_TEST
Not executed [47] ST_MAIN_LCD_IF_TEST
Passed [48] ST_BT_WAKEUP_TEST
Passed [5C] ST_WLAN_TEST
Not executed [00] ST_BT_WLAN_COEXISTENCE_TEST

thx in advance

shahid41 · 09-09-2009, 08:14

the scavenger@br latest ver dwonload ub support full flash prb solve

bk.gsm · 09-09-2009, 08:37

hello

thx for helping but my problem not sloved and other idea?

b.r.

bk.gsm · 09-09-2009, 09:23

plz mr.angel can u help me plz?

bk.gsm · 09-09-2009, 19:20

so ub team moderater will not help me. at least tell me what should i do?ungrent

BEST REGARDS

peter829 · 09-09-2009, 22:33

Quote:

Originally Posted by the scavenger

hi ub team i have a problem with E65.rm-208 it's on contact retailer here is the log:

MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Initializing phone...
Output power at Line1 3.93V is in range of: 4.00V ±10.0%
Phone powered.
Reading Info...
Soft Version: V 3.0615.3 Date: 31-01-08 Type: RM-208 (E65) Pack: (c) Nokia.
Product code: 0515722
Product code: 0536849
WLAN MAC: 001FDF1E72FE
Radio: GSM850 / GSM900 / GSM1800 / GSM1900 / WCDMA I
Original IMEI: 358631-01-********
Production serial: SIH999506
HW Version: 0801
DSP Version: A06w14PB_07w42
LCD Version:
APE ADSP Version:
SIMLock service: SIMLOCK SERVER VERSION 63 [040A08060118]
Profile bits: 0000000000000000
Simlock config: 2440700000000000
Invalid codes entered: 0 / 0
Block: 1; Lock: 1; State: Open; Data: FFFFFF
Block: 2; Lock: 1; State: Open; Data: FFFFFF
Block: 3; Lock: 1; State: Open; Data: FFFFFF
Block: 4; Lock: 1; State: Open; Data: FFFFFF
Block: 5; Lock: 1; State: Open; Data: FFFFFF
Block: 6; Lock: 1; State: Open; Data: FFFFFF
Block: 7; Lock: 1; State: Open; Data: FFFFFF
All locks are open.
Security code: 12345

as u see all data is right what can i do for this problem plz help me?

note:i wrote all monifaded pm with pm auth

b.r.

you try to read pm from other e65,then write the pm.after try to turn on.
if not on,try do pm auth.after that 100000000000% ok

**MobilesDoctor** · 09-10-2009, 00:06

Make Sx4 auth , Write Pm without 308 Value, If still same then Do Unlock it again.

09-08-2009, 21:55	#1 (permalink)
bk.gsm No Life Poster Join Date: Sep 2008 Location: some where in this world Age: 23 Posts: 1,510 Member: 869809 Status: Offline Thanks: 496 Thanked 424 Times in 294 Posts	plz help E65.rm-208 hi ub team i have a problem with E65.rm-208 it's on contact retailer here is the log: MCU Nokia Version: 1.126, and up to date. SMCU Nokia Version: 1.44, and up to date. Initializing phone... Output power at Line1 3.93V is in range of: 4.00V ±10.0% Phone powered. Reading Info... Soft Version: V 3.0615.3 Date: 31-01-08 Type: RM-208 (E65) Pack: (c) Nokia. Product code: 0515722 Product code: 0536849 WLAN MAC: 001FDF1E72FE Radio: GSM850 / GSM900 / GSM1800 / GSM1900 / WCDMA I Original IMEI: 358631-01-******** Production serial: SIH999506 HW Version: 0801 DSP Version: A06w14PB_07w42 LCD Version: APE ADSP Version: SIMLock service: SIMLOCK SERVER VERSION 63 [040A08060118] Profile bits: 0000000000000000 Simlock config: 2440700000000000 Invalid codes entered: 0 / 0 Block: 1; Lock: 1; State: Open; Data: FFFFFF Block: 2; Lock: 1; State: Open; Data: FFFFFF Block: 3; Lock: 1; State: Open; Data: FFFFFF Block: 4; Lock: 1; State: Open; Data: FFFFFF Block: 5; Lock: 1; State: Open; Data: FFFFFF Block: 6; Lock: 1; State: Open; Data: FFFFFF Block: 7; Lock: 1; State: Open; Data: FFFFFF All locks are open. Security code: 12345 as u see all data is right what can i do for this problem plz help me? note:i wrote all monifaded pm with pm auth b.r.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Nokia E65 RM-208 Needs unlocked - UK network	nokia1792	Nokia Base Band 5 ( BB-5 )	0	12-19-2007 20:25
E65 Rm-208 V1.0615.25.04 10-01-07 ?	fanig	UID - Box	2	11-10-2007 05:39
E65 Rm-208 V1.0615.25.04	khoavtran	Universalbox	1	09-20-2007 15:38
Firmware E65 RM-208 EMEA 1.0633.18.01 V1.0	pitone02	Nokia Base Band 5 ( BB-5 )	4	08-15-2007 16:04
WHERE CAN I FIND Firmware E65 RM-208 APAC 1.0633.58.01 V2.0	MODELTIME	Nokia Base Band 5 ( BB-5 )	1	06-06-2007 01:43

09-09-2009, 08:05	#2 (permalink)
bk.gsm No Life Poster Join Date: Sep 2008 Location: some where in this world Age: 23 Posts: 1,510 Member: 869809 Status: Offline Thanks: 496 Thanked 424 Times in 294 Posts	hello ub moderater plz help me and here is the self test: MCU Nokia Version: 1.126, and up to date. SMCU Nokia Version: 1.44, and up to date. Reading Info... Soft Version: V 3.0615.3 Date: 31-01-08 Type: RM-208 (E65) Pack: (c) Nokia. Product code: 0515722 Product code: 0536849 WLAN MAC: 001FDF1E72FE Radio: GSM850 / GSM900 / GSM1800 / GSM1900 / WCDMA I Original IMEI: 358631-01-******** Production serial: SIH999506 HW Version: 0801 DSP Version: A06w14PB_07w42 LCD Version: APE ADSP Version: 256 SIMLock service: SIMLOCK SERVER VERSION 63 [040A08060118] Profile bits: 0000000000000000 Simlock config: 2440700000000000 Invalid codes entered: 0 / 0 Block: 1; Lock: 1; State: Open; Data: FFFFFF Block: 2; Lock: 1; State: Open; Data: FFFFFF Block: 3; Lock: 1; State: Open; Data: FFFFFF Block: 4; Lock: 1; State: Open; Data: FFFFFF Block: 5; Lock: 1; State: Open; Data: FFFFFF Block: 6; Lock: 1; State: Open; Data: FFFFFF Block: 7; Lock: 1; State: Open; Data: FFFFFF All locks are open. Security code: 12345 Executing self tests... Passed [2E] ST_TAHVOINT_TEST Passed [03] ST_UEM_CBUS_IF_TEST No signal [0C] ST_EAR_DATA_LOOP_TEST Passed [0D] ST_SIM_CLK_LOOP_TEST Passed [21] ST_SIM_IO_CTRL_LOOP_TEST Passed [5D] ST_SIM_LOCK_TEST Passed [5A] ST_SECURITY_TEST Passed [02] ST_PWR_KEY_TEST Passed [14] ST_CURRENT_CONS_TEST Passed [27] ST_BACKUP_BATT_TEST Passed [3A] ST_WARRANTY_TEST Passed [38] ST_CMT_APE_WAKEUP_TEST Passed [60] ST_SLEEPCLK_FREQ_TEST Passed [65] ST_HOOKINT_TEST Passed [6C] ST_BTEMP_TEST Passed [56] ST_EXT_DEVICE_TEST Passed [53] ST_CDSP_RF_BB_IF_TEST Passed [55] ST_CDSP_RF_SUPPLY_TEST Passed [4A] ST_CDSP_TX_IQ_TEST Passed [52] ST_CDSP_TXC_DATA_TEST Passed [4F] ST_CDSP_PWR_DETECTOR_BIAS_TEST Passed [50] ST_CDSP_RX_PLL_PHASE_LOCK_TEST Passed [4B] ST_CDSP_TX_PLL_PHASE_LOCK_TEST Passed [51] ST_CDSP_WCDMA_TX_POWER_TEST Passed [4D] ST_CDSP_RX_IQ_LOOP_BACK_TEST Passed [06] ST_CDSP_GSM_TX_POWER_TEST Passed [07] ST_IR_LOOP_TEST Passed [15] ST_KEYBOARD_STUCK_TEST Passed [16] ST_LPRF_IF_TEST Passed [2C] ST_CAMERA_IF_TEST Passed [3B] ST_LPRF_AUDIO_LINES_TEST Not executed [47] ST_MAIN_LCD_IF_TEST Passed [48] ST_BT_WAKEUP_TEST Passed [5C] ST_WLAN_TEST Not executed [00] ST_BT_WLAN_COEXISTENCE_TEST thx in advance

09-09-2009, 08:14	#3 (permalink)
shahid41 No Life Poster Join Date: Nov 2007 Posts: 1,396 Member: 623703 Status: Offline Sonork: some one some love Thanks: 554 Thanked 402 Times in 271 Posts	the scavenger@br latest ver dwonload ub support full flash prb solve

09-09-2009, 08:37	#4 (permalink)
bk.gsm No Life Poster Join Date: Sep 2008 Location: some where in this world Age: 23 Posts: 1,510 Member: 869809 Status: Offline Thanks: 496 Thanked 424 Times in 294 Posts	hello thx for helping but my problem not sloved and other idea? b.r.

09-09-2009, 09:23	#5 (permalink)
bk.gsm No Life Poster Join Date: Sep 2008 Location: some where in this world Age: 23 Posts: 1,510 Member: 869809 Status: Offline Thanks: 496 Thanked 424 Times in 294 Posts	plz mr.angel can u help me plz?

09-09-2009, 19:20	#6 (permalink)
bk.gsm No Life Poster Join Date: Sep 2008 Location: some where in this world Age: 23 Posts: 1,510 Member: 869809 Status: Offline Thanks: 496 Thanked 424 Times in 294 Posts	so ub team moderater will not help me. at least tell me what should i do?ungrent BEST REGARDS

09-10-2009, 00:06	#8 (permalink)
MobilesDoctor Product Manager Join Date: Oct 2004 Location: Dublin > Ireland Posts: 13,033 Member: 87357 Status: Offline Sonork: 100.1574043 Thanks: 621 Thanked 9,040 Times in 2,641 Posts	Make Sx4 auth , Write Pm without 308 Value, If still same then Do Unlock it again.