unlock 1112 ok but signal drop - GSM-Forum

Joyax · 12-14-2008, 05:12

now i unlocked 1112 rh-93 easily but problem signal drop.

here is the log....

--------------------------------------------------------------------------------
MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Initializing phone...
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Phone powered.
Reading Info...
MCU Version: V 6.00 Date: 24-10-06 Type: RH-93 (1112/1110i) Additional_1: (c) NMP [Nokia 1112/1110i CABLE 1100]
PPM Version: V 6.00 Date: 24-10-06 Type: RH-93 (1112/1110i) Additional_1: (c) NMP Pack: MA
Product code: 0542845
Production serial: IED522252
Hardware version: 0536
Original IMEI: ******************
IMEI: ******************
Asic type: 2
Profile bits: 0000000000010002
Lockinfo: 0010100000000000
Lock version: 1
Writing SP info
Write lock succeeded
--------------------------------------------------------------------------------
TDCT4UnlockThread 2.6.6.1923 finished at: 2008/12/14 11:34:29

Done.

why??? last time it works without any problem????

i unlock it with jaf and it works without problm.

Litzkie · 12-14-2008, 05:14

just try too flash higher version and unlock again bro.....hope can help...

venuno · 12-14-2008, 05:21

due to patch unlock

try write pm

if still remain problem

back up first
1. erase flash the phone

2. flash with v.6.00 after flash

3. write pm

4. unlock using jaf or hwk it is auto

detect for patch unlock and wait until

highlight the icon thats it...

beezee_lao · 12-14-2008, 05:21

hi

do flash it

no need to unlock again after flash

br

Macwin™ · 12-14-2008, 05:22

just write good pm....

OTMAN-GSM · 12-14-2008, 05:24

Quote:

Originally Posted by Joyax

now i unlocked 1112 rh-93 easily but problem signal drop.

here is the log....

--------------------------------------------------------------------------------
MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Initializing phone...
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Phone powered.
Reading Info...
MCU Version: V 6.00 Date: 24-10-06 Type: RH-93 (1112/1110i) Additional_1: (c) NMP [Nokia 1112/1110i CABLE 1100]
PPM Version: V 6.00 Date: 24-10-06 Type: RH-93 (1112/1110i) Additional_1: (c) NMP Pack: MA
Product code: 0542845
Production serial: IED522252
Hardware version: 0536
Original IMEI: ******************
IMEI: ******************
Asic type: 2
Profile bits: 0000000000010002
Lockinfo: 0010100000000000
Lock version: 1
Writing SP info
Write lock succeeded
--------------------------------------------------------------------------------
TDCT4UnlockThread 2.6.6.1923 finished at: 2008/12/14 11:34:29

Done.

why??? last time it works without any problem????

i unlock it with jaf and it works without problm.

I see your phone log, that's strange
it's RH-93 that means DCT4+ ASIC11 phone, it can unlocked only by firmware patch, i don't know why UB unlock it direcly by writing unlocked SP area, try to rewrite a full PM and unlock it again by another tool . Try to report this problem to UB supporter to fix it.

12-14-2008, 05:12	#1 (permalink)
Joyax No Life Poster Join Date: Jan 2008 Location: Surigao del Norte,Phil. Age: 50 Posts: 738 Member: 679678 Status: Offline Thanks Meter: 72	unlock 1112 ok but signal drop now i unlocked 1112 rh-93 easily but problem signal drop. here is the log.... -------------------------------------------------------------------------------- MCU Nokia Version: 1.126, and up to date. SMCU Nokia Version: 1.42, and up to date. Initializing phone... Output power at Line1 3.95V is in range of: 4.00V ±10.0% Phone powered. Reading Info... MCU Version: V 6.00 Date: 24-10-06 Type: RH-93 (1112/1110i) Additional_1: (c) NMP [Nokia 1112/1110i CABLE 1100] PPM Version: V 6.00 Date: 24-10-06 Type: RH-93 (1112/1110i) Additional_1: (c) NMP Pack: MA Product code: 0542845 Production serial: IED522252 Hardware version: 0536 Original IMEI: **************** IMEI: **************** Asic type: 2 Profile bits: 0000000000010002 Lockinfo: 0010100000000000 Lock version: 1 Writing SP info Write lock succeeded -------------------------------------------------------------------------------- TDCT4UnlockThread 2.6.6.1923 finished at: 2008/12/14 11:34:29 Done. why??? last time it works without any problem???? i unlock it with jaf and it works without problm.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
U890 Unlock Ok but signal problems	derk	FuriousGold	3	01-22-2009 15:14
>>> K1s - Unlocking phone... OK - BUT NOT UNLOCK <<<	RNC_EBM	Smart-Clip	31	06-06-2008 12:03
v3x i unlock this phone with smart clip unlock is ok but display is blank..help	makkah mobile	Motorola Hardware Repair	8	03-22-2007 07:34
Z140 Unlock. Code OK But	davesmobiles	UST Pro II	4	03-22-2006 16:15
Unlocked z500v Ok BUT!!!!	dragon1	QUALCOMM Models (3G)	4	03-10-2006 18:44

12-14-2008, 05:14	#2 (permalink)
Litzkie Junior Member Join Date: Mar 2008 Posts: 25 Member: 732104 Status: Offline Thanks Meter: 4	just try too flash higher version and unlock again bro.....hope can help...

12-14-2008, 05:21	#3 (permalink)
venuno No Life Poster Join Date: Jun 2007 Location: Talk to * and He Will Listen Posts: 3,820 Member: 532761 Status: Offline** Sonork: 100-1592994 Thanks Meter: 1,104	due to patch unlock try write pm if still remain problem back up first 1. erase flash the phone 2. flash with v.6.00 after flash 3. write pm 4. unlock using jaf or hwk it is auto detect for patch unlock and wait until highlight the icon thats it...

12-14-2008, 05:21	#4 (permalink)
beezee_lao Freak Poster Join Date: Jul 2007 Location: Philippines Posts: 433 Member: 537853 Status: Offline Sonork: 100.1590344 Thanks Meter: 124	hi do flash it no need to unlock again after flash br

12-14-2008, 05:22	#5 (permalink)
Macwin™ Freak Poster Join Date: Nov 2007 Location: Worldwide Best Server Posts: 287 Member: 639209 Status: Offline Sonork: 100.1627284 Thanks Meter: 69	just write good pm....