Please Read about A70 v32 with 4MB flash chip
 

There are some A70 v32 with 4MB AMD flash chips. It is not possible to upload 8MB fullflashes or flash with earlier version of winswup.
For fullflashing of these phones please use our special file for 4MB AMD flash chips

I think it's better to use WinSWUP to revive any Siemens EGold/SGold phones. It's easy and every time 100% success.
For BG users of SST we can open ER for dead phones.
For more info mail private.

So mr.SST where...
 

...are that special flash? Is thes one v14 AMD 4Mb? I just try to repair one A70 v32 with 4Mb Flash IC and gess what......he is steel dead!!!!!!!
Do You have more explanation or me to use Joker to fix these phone?
Thank's in advice:confused:
btw....after try to unlock A70V32 4Mb Flash IC with SST 6.83 I gat Wrong Softweare???????

If you get Wrong Software after any procedure it is cause by a problem either in the cable or in the eeprom itself. In this case upload one of the eeprom from the support page and it will fix the problem.If the phone is not powering after eeprom _type1, just upload eeprom type2. you can also upload 4MB special flash or if you have sst v6.84 any from the other flash files and if the phone is not powering after the executed repairing procedure upload one of the eeprom files from the support area whith which the phone will power on.

OK...these is support what I looking for...I gona try and let You all now what is going on. One more thing....I gat WrongSw only on A70v32FlashIC4Mb and not on A70v32FlashIC8Mb(I have to do a couple of them here at the same time...) with 6.83...I just instal 6.84 and I'm gona try to repair my phone..:confused:

And...
 

..now flashinfg bar goes to 100%, after that writing Eeprom goes fine, Repair buton makes hes job, Unlock buton makes hes job....but result is the same evry time...phone is dead..just a very low tone from phone when I try to power hem on...
Phone was a new, TP I check again using microscope...everything is OK around TP and a same TP is cuted right..
Is that do something to You mr.SST:
FlashChip: 0001227E(AMD):confused:

One more thing I forgot to say...
 

...I try to make trick with WinSwup(about wich I wrote long time a go on these forum and on some other forums so!) but WinSwup can't do anything...:confused:
And I did not realase untill now that on the back sticker of these phone is writen BENQ A70 not Siemens A70!?

It is not important if it is written benq or siemens at the bad label.
Just upload one of the 2 eeprom files from the support site (each one for different hardware). If you want to flash phone with cut test-point with winswup connect the phone to contrast tool wait when it showsw "servise mode and connect it with winswup

If You @SST just...
 

...read my posts above You will be see that I allredy try to do al of these advices ....without results. I can't tell taht 100% problems coused by SST...ther is posibility that these phone was factory bad in some way....
So, no hard filings? I'm just try to clear things...Cheers

Sorry...
 

..I forgot to say that my A&) is working again and it was bug in 6.83 wich kill hem and make all of these thing like I alredy describe above.
So for anybody who may have the problem like I did solution is to write these eeprom to phone and phone is a live again(big thank's go's to DeDaMraz!!!)......

Hello
I need help,i do unlock A70 v32 with 6.84ver of sst,phone display wrong software
i write eeprom 1,and eeprom type 2,phone didnt turn on,than i write fullflash 8mb and bouth eeproms,phone didnt turn on
Then i read in the forum about 4mb AMD flash,i write full from support and bouth eeproms ,and phone not powered
then i write eeprom from "hallo" A70v14 eeprom repair,now phone turn on with nothing on display for 2 seconds,and when i turn on with contrast tool phone display "service mode" but winswup woount ping
Can sombody help to repair new phone???????????

@Sioma....
 

...try to do again full flash with 4mb flash file, than write eeprom from my post and make Unlock...post res.
Cheers

I did like you say ,but phone only starts for some seconds and turn off
Thanks for help
???

@Sioma....
 

...are You shoore that it's A70 with 4Mb Flash IC? Wich colour is phone....silver or blue? Didi You try to write 8Mb full flash? After full flash 8Mb pl's write these eeprom for 8Mb and post res.
Cheers

With your eeprom and 8mb flash phone is dead
Flash Chip : 0001227E (AMD)
Any ideas?

@Sioma Man, before make a full flash with flash from sst support area unchek "Protect bootcore area". Make flash phone and write repair eeprom for 4MB flash from hallo. Phone must be alive agai. Tested tonigh with 4 dead phones.

P.S. If You wont to change language just get proper file from sst support site and just flash it.

Good luck!

Thanks man
Phone alive again,i already forgot about unchek,i already have before this problem with ax75

It's not good idea to change bootcore area. Phone becomes unstable and deadable. But who cares.
There is much beter way to "undead" these phones, but this is for experts only.
Happy New Year!

same thing apllied to me, after unlock. wrong software. aster repair. dead, after flash. mortuary.
this apply to every of this version.
i suggest vergin or unlocked eeprom of all phones uploaded to sst support so to avoid buying phone for custumers

It's true but...
 

..problem is solved couple days after that post..."..I forgot to say that my A&) is working again and it was bug in 6.83 wich kill hem and make all of these thing like I alredy describe above.
So for anybody who may have the problem like I did solution is to write these eeprom to phone and phone is a live again(big thank's go's to DeDaMraz!!!)......"...
Yes...stilll some A70 get WrongSW after unlocking with SST even 6.85, but U can solve these...no voris....
p.s. For every problem with not powering on....most propobly it's TP problem..
Cheers

Yup the true here is cause Hallo fineshed sst dirty job. E2P have ****in difference between 8MB and 4MB based headset.So all of SST Team mus say a BIG THANK`S to member Hallo.They wrote for this problem before 4-5 mount`s but in our market here in Bulgaria have no to this momment 4MB flash IC based headset`s

And How Was Hallo's Problem Solved? Give Details Pls

@magixian....
 

..are You read about on first page of these thread? Pl's go to first page and read....if You don't undarstan pl's let me now and I try to explane to You more detailed. OK?
Cheers

ok, it is now clearly understood!

ax 75 repair eeprom?

A70!!! Thanks Hallo!!!

I had 2 phones dead, 1 unlocking... and the other triyng to change the language!

I did like HALLO say, and they are working again!


Thx again!!!

I'm glad to see...
 

...but like allredy told....regards goes to @DeDaMraz who give that repair eeprom....I just poot here becose @SST didn't poot to support area.
Cheers

I have a siemens a57 when i powered it it was just blue lighting for few second then off i cut the test point and flash with A57 v3 lq3 repair fullflash by sst after flash it show me bad comunication. And if i power on the keypad light on & off (just blip) and nothing Else. What i can pls help me. NB: I flash it with direct cable. Pls help

For A57 with Micron Flash chips you should check "repair 2Cxxxx" on SST v 6.86 and it will repair the eeprom area

4 ME NEVER WORKED, PHONE IS STILL DEAD, VERY DEAD!

I can't bolive...
 

...You will be the one who did not menage to repair these stupid phone..
1. SST 6.86
2. full flash 4Mb or 8Mb(depend what Flash IC is in phone)
3. repair eeprom file from these thread for 4Mb or 8Mb
4. unlock
What is exactly Your problem?
Let's see and repair these phones.:cool:

@ hallo

my problem is this! when i check info with sst, it wont show flash size, i did not check it previously, when i write 4mb into phone, it accepts without problem, but repair never worked

when i write 8mb, it read beyond end of file, shows flash is 4mb, when i chech with joker, it shows flash as 8mb, when i read flash with it, even a working phone which shows 8mb with joker, it read out 4mb flash size, i have read all files from a working phone both with sst and joker and write into a dead one, it remains very very dead still!

do you know where casket is sold, these phone need interment!