too many cf75 killed in 1 day - GSM-Forum

gsmuy · 12-28-2005, 21:38

dear sst.
its second cf75 i killed with sst in 1 day.
i changed cable many times.
flashed , unlocked and repaired and i dont know what else to do

i have a few to do but i wont do it if i will kill them again.

the error all are getting is the first time i unlock sst read imei ok and phone dead, second time i unlock it sst reads eeprom imei as 3510351035103510 ......

after repair this error get fixed but phone still dead.

need solution ASAP

thanks
GSMUY

debeliamark · 12-29-2005, 06:36

Solution is to use carrefully SST TP, because RAM IC can be damaged easy... so take now PapuaUtils and check external RAM - if something is not OK - then change it and repeat reviving... next time think twice

CLIFFORD25502 · 12-29-2005, 07:52

i have sold wire to testpoin so no way to damage it.

CLIFFORD25502 · 12-29-2005, 09:32

1st results! in my case i have 2pcs dead cf75 and 100% software dead. repared by writing not original eeprom after repair function.

CLIFFORD25502 · 12-29-2005, 10:47

new bug in 6.85 find. it cant write full into my cf75. read perfect but dont write on all speed try. whis free soft all ok.

SST-GSM · 12-29-2005, 13:28

Quote:

Originally Posted by CLIFFORD25502

i have sold wire to testpoin so no way to damage it.

Please do not solder wires to the tp use SST 3 in 1 cable or needle connected to gnd or pin 2 of the phone connector.

SST-GSM · 12-29-2005, 13:46

Quote:

Originally Posted by CLIFFORD25502

new bug in 6.85 find. it cant write full into my cf75. read perfect but dont write on all speed try. whis free soft all ok.

No it is not a bug in SST v6.85!
Anyway it was reported that some new CF75 stopped flashing at some percent with SST due to the big amount data loses during the transmition between PC and phone. We shall analalyse this problem too.Meantime we advice you to use winswup if SST stops flashing at any speed

japunlock · 12-29-2005, 15:17

but winswup will not repair phoneafter bad unlock 6 cf75 on my count now
i only wish to repair them no matter how the flash chip is ok it answers ok to any test but eeprom is the problem can any body post a eeprom readout from a v8 or v10 cf75??

ompgsm · 12-29-2005, 15:24

Quote:

Originally Posted by japunlock

but winswup will not repair phoneafter bad unlock 6 cf75 on my count now
i only wish to repair them no matter how the flash chip is ok it answers ok to any test but eeprom is the problem can any body post a eeprom readout from a v8 or v10 cf75??

This is all I have now: a v10 cf75 eeprom backup ,made with c65flasher 1072. In few houres I will have a good cf75 and i can give u all.
Best regards
PS: I have too, a beatiful cf75 dead after SST unlock. It's from another service-shop and that guy tryed to unlock with sst

SST-GSM · 12-29-2005, 20:38

Quote:

Originally Posted by japunlock

but winswup will not repair phoneafter bad unlock 6 cf75 on my count now
i only wish to repair them no matter how the flash chip is ok it answers ok to any test but eeprom is the problem can any body post a eeprom readout from a v8 or v10 cf75??

If you personally have a constant problem with this model please send an email to [email protected]
we shall help you resolve you problems untill we publish official solution fro this problem.

TELE-MEDIA · 12-29-2005, 22:32

I can't read fullflash from my c65. It goes to 100% but then nothing more, can't finish to write read flash to file. What's the problem?
BR
ZG

CLIFFORD25502 · 12-30-2005, 08:02

i send u massage but still no answer! sst team it is no good move!

CLIFFORD25502 · 12-30-2005, 08:38

Please connect the needle to Test-point
Starting Repairing Procedure ...
Flash Chip: 0089880D (Intel)
Bootcore IMEI: 356909003803360
OTP IMEI: 356909003803360
Writing Simlock ...
Repairing Procedure Stopped
Cannot Write Simlock Data
Performin Additional Repairing Procedure
Please connect the needle to Test-point
Please connect the needle to Test-point
Please connect the needle to Test-point
Starting Unlock Procedure ...
OTP IMEI: 35690900380336
EEPROM IMEI: 356909003803360
Writing Simlock ...
Unlock Procedure Stopped
Cannot Write Simlock Data

SST-GSM · 12-30-2005, 17:43

Quote:

Originally Posted by CLIFFORD25502

Please connect the needle to Test-point
Starting Repairing Procedure ...
Flash Chip: 0089880D (Intel)
Bootcore IMEI: 356909003803360
OTP IMEI: 356909003803360
Writing Simlock ...
Repairing Procedure Stopped
Cannot Write Simlock Data
Performin Additional Repairing Procedure
Please connect the needle to Test-point
Please connect the needle to Test-point
Please connect the needle to Test-point
Starting Unlock Procedure ...
OTP IMEI: 35690900380336
EEPROM IMEI: 356909003803360
Writing Simlock ...
Unlock Procedure Stopped
Cannot Write Simlock Data

Please upload fullflash to the phone and then press repair.

CLIFFORD25502 · 12-30-2005, 19:29

but problem is that whis 6.85 sst is imposible 2 upload full flash soft hangs on 0% whis usb ftdi based cable and whis regular com cable. whis papua utils and chaos x65 flasher problem solved from 1st run.
p.s. at first i must say that free soft is much more better then buyed for $$$.

12-28-2005, 21:38	#1 (permalink)
gsmuy No Life Poster Join Date: May 2004 Location: the past, which is your future Age: 45 Posts: 602 Member: 65216 Status: Offline Thanks Meter: 23	too many cf75 killed in 1 day dear sst. its second cf75 i killed with sst in 1 day. i changed cable many times. flashed , unlocked and repaired and i dont know what else to do i have a few to do but i wont do it if i will kill them again. the error all are getting is the first time i unlock sst read imei ok and phone dead, second time i unlock it sst reads eeprom imei as 3510351035103510 ...... after repair this error get fixed but phone still dead. need solution ASAP thanks GSMUY

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Recover Money in 1 Day with MX-KEY Stock In Pakistan	hafiz	Main Sales Section	0	02-03-2010 09:55
Too many asking me in msn so ------->HERESIMPLE INSTRUCTION TO UNLOCK 3.1.2	GSMman187	iPhone 2 / iPhone 3G / iPhone 3GS	9	11-04-2009 20:50
W0W : 9 Updates in 1 day by Infinity Box . check out wich update suits ure market	Infinity-Box	Main Sales Section	0	06-18-2007 18:59
V630i and K610i dead.. to many fones dead in same day	MadPhone	Universalbox	7	03-06-2007 13:36
2-nd FIRST IN THE WORLD update in 1 DAY !!! - BenQ S82 added	Gobi	VygisToolbox	14	10-30-2006 09:25

12-29-2005, 06:36	#2 (permalink)
debeliamark No Life Poster Join Date: May 2001 Location: Bulgaria Age: 56 Posts: 4,796 Member: 4627 Status: Offline Sonork: 57528:debeliamark Thanks Meter: 1,034	Solution is to use carrefully SST TP, because RAM IC can be damaged easy... so take now PapuaUtils and check external RAM - if something is not OK - then change it and repeat reviving... next time think twice

12-29-2005, 07:52	#3 (permalink)
CLIFFORD25502 No Life Poster Join Date: Aug 2004 Age: 47 Posts: 2,301 Member: 76522 Status: Offline Thanks Meter: 30	i have sold wire to testpoin so no way to damage it.

12-29-2005, 09:32	#4 (permalink)
CLIFFORD25502 No Life Poster Join Date: Aug 2004 Age: 47 Posts: 2,301 Member: 76522 Status: Offline Thanks Meter: 30	1st results! in my case i have 2pcs dead cf75 and 100% software dead. repared by writing not original eeprom after repair function.

12-29-2005, 10:47	#5 (permalink)
CLIFFORD25502 No Life Poster Join Date: Aug 2004 Age: 47 Posts: 2,301 Member: 76522 Status: Offline Thanks Meter: 30	new bug in 6.85 find. it cant write full into my cf75. read perfect but dont write on all speed try. whis free soft all ok.

12-29-2005, 15:17	#8 (permalink)
japunlock No Life Poster Join Date: Oct 2004 Location: Cochabamba Age: 38 Posts: 1,610 Member: 87396 Status: Offline Thanks Meter: 64	but winswup will not repair phoneafter bad unlock 6 cf75 on my count now i only wish to repair them no matter how the flash chip is ok it answers ok to any test but eeprom is the problem can any body post a eeprom readout from a v8 or v10 cf75??

12-29-2005, 22:32	#11 (permalink)
TELE-MEDIA Freak Poster Join Date: Sep 2003 Location: Warsaw, Poland Age: 54 Posts: 272 Member: 38755 Status: Offline Thanks Meter: 3	I can't read fullflash from my c65. It goes to 100% but then nothing more, can't finish to write read flash to file. What's the problem? BR ZG

12-30-2005, 08:02	#12 (permalink)
CLIFFORD25502 No Life Poster Join Date: Aug 2004 Age: 47 Posts: 2,301 Member: 76522 Status: Offline Thanks Meter: 30	i send u massage but still no answer! sst team it is no good move!

12-30-2005, 08:38	#13 (permalink)
CLIFFORD25502 No Life Poster Join Date: Aug 2004 Age: 47 Posts: 2,301 Member: 76522 Status: Offline Thanks Meter: 30	Please connect the needle to Test-point Starting Repairing Procedure ... Flash Chip: 0089880D (Intel) Bootcore IMEI: 356909003803360 OTP IMEI: 356909003803360 Writing Simlock ... Repairing Procedure Stopped Cannot Write Simlock Data Performin Additional Repairing Procedure Please connect the needle to Test-point Please connect the needle to Test-point Please connect the needle to Test-point Starting Unlock Procedure ... OTP IMEI: 35690900380336 EEPROM IMEI: 356909003803360 Writing Simlock ... Unlock Procedure Stopped Cannot Write Simlock Data

12-30-2005, 19:29	#15 (permalink)
CLIFFORD25502 No Life Poster Join Date: Aug 2004 Age: 47 Posts: 2,301 Member: 76522 Status: Offline Thanks Meter: 30	but problem is that whis 6.85 sst is imposible 2 upload full flash soft hangs on 0% whis usb ftdi based cable and whis regular com cable. whis papua utils and chaos x65 flasher problem solved from 1st run. p.s. at first i must say that free soft is much more better then buyed for $$$.