1112 flash error - GSM-Forum

mukund_orange · 01-18-2010, 11:05

my nokia 1112 was hanging, flashed it with 7.02 v file. while flash running it interrupted in the below area,

1st Boot: Ok, DCT4, UPP: 2201 [Rh-93] [2.0.9.0]
2nd Boot: u_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x013FFFFF,00EC2268,Sam K8S3215ETE
Algorithm: u_amd.fia, Ver: 4.79.0
Algorithm Ok, MSID: 8439E59997122B54FACA2B988B
Decoded MSID: 3E4EBAE9-00C53452-AA000000
Encoded FAID: 481A4430-E2D8665E-499B0BBD
IMAGE: rh93_07.020
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013BFFFF Erased, Time: 00:24
Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:01
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
Write Error: hDat 14, at: 0x01000000:08

moderaters solution please ?

wbr,, mukund

GsmMunna · 01-18-2010, 11:44

Check your Cable TX line.
Check Flash ic should not be dry sold

Munna.

metals · 01-19-2010, 17:45

i have same problum cable is fine cleaned pcb but still same problum

GSM_STREET · 01-19-2010, 20:16

Change Cable get a better cable

tsyx · 01-20-2010, 02:36

use jaf,ok%...........ok

01-18-2010, 11:05	#1 (permalink)
mukund_orange Insane Poster Join Date: May 2007 Posts: 83 Member: 516628 Status: Offline Thanks Meter: 9	1112 flash error my nokia 1112 was hanging, flashed it with 7.02 v file. while flash running it interrupted in the below area, 1st Boot: Ok, DCT4, UPP: 2201 [Rh-93] [2.0.9.0] 2nd Boot: u_2nd.fia, Ver: 4.79.0 Fl0: 0x01000000-0x013FFFFF,00EC2268,Sam K8S3215ETE Algorithm: u_amd.fia, Ver: 4.79.0 Algorithm Ok, MSID: 8439E59997122B54FACA2B988B Decoded MSID: 3E4EBAE9-00C53452-AA000000 Encoded FAID: 481A4430-E2D8665E-499B0BBD IMAGE: rh93_07.020 Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00 Area2: 0x01010000-0x013BFFFF Erased, Time: 00:24 Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:01 Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds Write Error: hDat 14, at: 0x01000000:08 moderaters solution please ? wbr,, mukund

01-18-2010, 11:44	#2 (permalink)
GsmMunna No Life Poster Join Date: May 2004 Location: A ROUGH ROAD LEADS 2 THE STARS Posts: 3,452 Member: 66937 Status: Offline Thanks Meter: 5,053	Check your Cable TX line. Check Flash ic should not be dry sold Munna.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
N96 Weird Flashing error	javakiller	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	14	10-10-2010 11:55
1650 flash error	nilesh_patel717	Nokia Hardware & Hardware Repair	3	03-29-2010 14:03
nokia 1112 flash error	pakalio	HWK	2	06-08-2009 16:58

01-19-2010, 17:45	#3 (permalink)
metals No Life Poster Join Date: Jul 2008 Posts: 1,010 Member: 811779 Status: Offline Thanks Meter: 242	i have same problum cable is fine cleaned pcb but still same problum

01-19-2010, 20:16	#4 (permalink)
GSM_STREET No Life Poster Join Date: Oct 2009 Location: JAM Exploring Simlock 3!!! Age: 36 Posts: 947 Member: 1149815 Status: Offline Sonork: N/A for now Thanks Meter: 218	Change Cable get a better cable

01-20-2010, 02:36	#5 (permalink)
tsyx Freak Poster Join Date: Mar 2008 Posts: 127 Member: 733840 Status: Offline Thanks Meter: 11	use jaf,ok%...........ok