GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > Saras Boxes > HWK
Reload this Page 1200 dead so please help me
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


 
Page 1 of 2 1 2
 
LinkBack Thread Tools Display Modes
Old 01-01-2011, 15:36   #1 (permalink)
Freak Poster
 
Join Date: Sep 2007
Posts: 185
Member: 596130
Status: Offline
Thanks Meter: 15
1200 dead so please help me

nokia 1200 software problem so i flash with hwk but after flash phone dead only nokia logo on display

so please help me



1st Boot: Ok, DCT4, UPP: 2292 [Rh-99] [2.1.0.0]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x013FFFFF,00898872,Int 28F320W18
Algorithm: u3_intel.fia, Ver: 4.80.0
Algorithm Ok, MSID: 847B0BC23A92D120B8FD07ACE1
Decoded MSID: 3E4EBAE9-004A02B1-A9000000
Encoded FAID: A136152D-C1C450BD-E06EA0A9
IMAGE: rh99_05.800
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013AFFFF Erased, Time: 00:34
Area3: 0x013B0000-0x013EFFFF Erased, Time: 00:03
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:18
IMAGE: rh990_nai5.80aa
Area1: 0x01380000-0x013AFFFF Erased, Time: 00:01
CNT Flashing Completed, Time: 00:01
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile
 
Old 01-01-2011, 15:38   #2 (permalink)
Freak Poster
 
Join Date: Apr 2008
Posts: 228
Member: 743419
Status: Offline
Sonork: ranz_28
Thanks Meter: 42
try to use easy cable for flashing.......
 
The Following User Says Thank You to ranz_28 For This Useful Post:
Old 01-01-2011, 15:45   #3 (permalink)
Banned
 
Join Date: Nov 2010
Posts: 23
Member: 1440154
Status: Offline
Sonork: 1234567890
Thanks Meter: 8
dont use down right side pin in flashing.flash the phon with only 4 pin.100/.
 
Old 01-02-2011, 05:17   #4 (permalink)
No Life Poster
 
ABDUL RAJA's Avatar
 
Join Date: Dec 2007
Location: INDIA
Posts: 1,501
Member: 665989
Status: Offline
Sonork: 100.1597348
Thanks Meter: 552
Use Easy Cable or block the last pin vcc (5 pin )in FBus cable.

In easy cable while content extraction is started.... insert battery and then power on mobile
 
The Following 2 Users Say Thank You to ABDUL RAJA For This Useful Post:
Old 01-03-2011, 12:16   #5 (permalink)
Freak Poster
 
Join Date: Sep 2007
Posts: 185
Member: 596130
Status: Offline
Thanks Meter: 15
Quote:
Originally Posted by Custmur View Post
dont use down right side pin in flashing.flash the phon with only 4 pin.100/.
i confuse any body please help me
 
Old 01-03-2011, 12:43   #6 (permalink)
Banned
 
Join Date: Dec 2010
Location: Islamic repablic of pak
Age: 37
Posts: 308
Member: 1468508
Status: Offline
Sonork: 100.1584728
Thanks Meter: 159
Quote:
Originally Posted by hemantvanaju View Post
nokia 1200 software problem so i flash with hwk but after flash phone dead only nokia logo on display

so please help me



1st Boot: Ok, DCT4, UPP: 2292 [Rh-99] [2.1.0.0]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x013FFFFF,00898872,Int 28F320W18
Algorithm: u3_intel.fia, Ver: 4.80.0
Algorithm Ok, MSID: 847B0BC23A92D120B8FD07ACE1
Decoded MSID: 3E4EBAE9-004A02B1-A9000000
Encoded FAID: A136152D-C1C450BD-E06EA0A9
IMAGE: rh99_05.800
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013AFFFF Erased, Time: 00:34
Area3: 0x013B0000-0x013EFFFF Erased, Time: 00:03
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:18
IMAGE: rh990_nai5.80aa
Area1: 0x01380000-0x013AFFFF Erased, Time: 00:01
CNT Flashing Completed, Time: 00:01
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

fast erase
and


fiash only mcu and ppm
 
Old 01-03-2011, 13:06   #7 (permalink)
Freak Poster
 
habibkhoso's Avatar
 
Join Date: Dec 2006
Location: DIL DIL PAKISTAN
Posts: 345
Member: 407739
Status: Offline
Sonork: 100.1603554
Thanks Meter: 203
Dear wash board and clean then rehot cpu then flash it will be ok 100%
 
Old 01-03-2011, 13:46   #8 (permalink)
Freak Poster
 
Join Date: Sep 2007
Posts: 185
Member: 596130
Status: Offline
Thanks Meter: 15
Quote:
Originally Posted by Custmur View Post
dont use down right side pin in flashing.flash the phon with only 4 pin.100/.
i use 4 pin cable also but still same problem
 
Old 01-03-2011, 13:57   #9 (permalink)
Freak Poster
 
Join Date: Sep 2007
Posts: 101
Member: 585061
Status: Offline
Thanks Meter: 10
try to rehot UEM and CPU......................
 
Old 01-29-2011, 16:14   #10 (permalink)
Freak Poster
 
Join Date: Sep 2007
Posts: 185
Member: 596130
Status: Offline
Thanks Meter: 15
Quote:
Originally Posted by ranz_28 View Post
try to use easy cable for flashing.......
thanks......................................
 
Old 01-29-2011, 17:17   #11 (permalink)
Insane Poster
 
Join Date: Oct 2010
Location: Bohol
Posts: 67
Member: 1424725
Status: Offline
Thanks Meter: 35
Quote:
Originally Posted by ranz_28 View Post
try to use easy cable for flashing.......
boss how much is that now?
 
Old 02-02-2011, 11:54   #12 (permalink)
No Life Poster
 
uandumobile's Avatar
 
Join Date: Sep 2009
Location: Pakistan
Posts: 1,315
Member: 1122200
Status: Offline
Sonork: 100.1669761
Thanks Meter: 558
Quote:
Originally Posted by ABDUL RAJA View Post
Use Easy Cable or block the last pin vcc (5 pin )in FBus cable.

In easy cable while content extraction is started.... insert battery and then power on mobile

yes 10000000% agree


[email protected]
 
Old 02-02-2011, 12:40   #13 (permalink)
No Life Poster
 
abidottupara35's Avatar
 
Join Date: Dec 2009
Location: GSMKSA Team
Posts: 1,090
Member: 1178222
Status: Offline
Sonork: 100.1602620
Thanks Meter: 467
Try flash with jaf box or jaf crack software 100000%solve
 
Old 02-02-2011, 13:21   #14 (permalink)
Freak Poster
 
Join Date: Oct 2006
Posts: 342
Member: 364299
Status: Offline
Thanks Meter: 53
try to wash the phone on the bane then dry and rehot it
then try to reflash the phone
 
Old 02-02-2011, 13:41   #15 (permalink)
Freak Poster
 
mobylsolute's Avatar
 
Join Date: Sep 2007
Location: india
Age: 35
Posts: 230
Member: 587695
Status: Offline
Thanks Meter: 61
Quote:
Originally Posted by hemantvanaju View Post
nokia 1200 software problem so i flash with hwk but after flash phone dead only nokia logo on display

so please help me



1st Boot: Ok, DCT4, UPP: 2292 [Rh-99] [2.1.0.0]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x013FFFFF,00898872,Int 28F320W18
Algorithm: u3_intel.fia, Ver: 4.80.0
Algorithm Ok, MSID: 847B0BC23A92D120B8FD07ACE1
Decoded MSID: 3E4EBAE9-004A02B1-A9000000
Encoded FAID: A136152D-C1C450BD-E06EA0A9
IMAGE: rh99_05.800
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013AFFFF Erased, Time: 00:34
Area3: 0x013B0000-0x013EFFFF Erased, Time: 00:03
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:18
IMAGE: rh990_nai5.80aa
Area1: 0x01380000-0x013AFFFF Erased, Time: 00:01
CNT Flashing Completed, Time: 00:01
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile
drysolder cpu and related parts with flux then flash 1200:aak:
 
 
Page 1 of 2 1 2

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
HELP!!! BACKGROUND SCREEN LOGO Michael Go Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 8 11-23-2017 08:11
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
Eeprom dump lost, help needed. CAMILO Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 11-29-2010 19:04
Help with 6110 paulomt1 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 2 05-25-2009 16:29
Winlock 1.10 - Help rdmfs Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 3 06-25-1999 08:21

 



All times are GMT +1. The time now is 16:22.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.27723 seconds with 10 queries

SEO by vBSEO