1208 contact service - GSM-Forum

aboymaligalig · 05-28-2009, 05:32

kind help with this 1208 contact service
i full erase the phone then full flash but goes error on cnt using hwk i tried from highest version to lowest version but goes same error on cnt any solution for this? is it a hardware or software problem

cel_phon · 05-28-2009, 05:46

after flash unlock

problem will be solve

cel_phon · 05-28-2009, 05:47

also perform '' SELF TEST '

may be LCD is not compatible

CONCORDIA GSM · 05-28-2009, 05:51

[quote= goes error on cnt using hwk [/quote]

repalce charging socket then flash again because of this unit cant go in local mode at cnt stage then software shows process failed.

jollymolly · 05-28-2009, 05:54

use easy cable to flash it

afridi4all · 05-28-2009, 06:43

Try to Flash in Jaf...and unlock it ......hope ur problem will Ok

JKKB · 05-28-2009, 21:26

Quote:

Originally Posted by aboymaligalig

kind help with this 1208 contact service
i full erase the phone then full flash but goes error on cnt using hwk i tried from highest version to lowest version but goes same error on cnt any solution for this? is it a hardware or software problem

Hello,
If CNT extraction stage fails,it is cable problem. Here,disable the VPP connector in the cable.Simply put,just put a small piece of paper on top of the VPP line in the telephone to block the cable's pin from getting into contact with the phone's VPP line. GOOD LUCK!

MiChAGSM · 05-28-2009, 21:51

unlock and go problem solved

Linkpt · 05-28-2009, 21:54

Try to Flash with Easy Flasher cable. It will work, ant then unlock it.

Tell us the result

aboymaligalig · 05-29-2009, 03:32

problem solve using jaf, disabled vpp, uncheck rpl208 then flash using 5.71 version then write pm then unlock then factory settings, thanks jaf. . .

Major-T · 05-29-2009, 11:14

after flashing already patched phone you will always have contact service
because overwrite patch with original firmware.
after flashing these phones need do unlock again.
is this too hard to understand ?

@ afridi4all
your recomendations sounds like "if cannot drive, try to buy new car, maybe it helps"

Linkpt · 05-29-2009, 12:47

Quote:

Originally Posted by Major-T

after flashing already patched phone you will always have contact service
because overwrite patch with original firmware.
after flashing these phones need do unlock again.
is this too hard to understand ?

@ afridi4all
your recomendations sounds like "if cannot drive, try to buy new car, maybe it helps"

lololololololololololololololololololololololololo lololololololololololololol

Shiroko · 05-29-2009, 13:10

Bro it's a cable problem, had it a couple of times. 1200/08 uses a different cable. You should disconnect the bottom pin of the cable, the one fardhest from the battery connector, or you can just put a piece of papper in between the cable and the board on that pin... 100% it will work..

http://forum.gsmhosting.com/vbb/show...ght=1208+cable

anajnisha · 05-29-2009, 19:12

first clean your pcb and het it.
second write good pm file 110% solved.

ranagaurav · 05-30-2009, 02:24

brother this is intel chip plz flash with ub only ub support intel chip
i thing your problem is solv 1000%
flash+write pm+unlocking+ui setting

05-28-2009, 05:32	#1 (permalink)
aboymaligalig Freak Poster Join Date: Mar 2007 Posts: 172 Member: 460316 Status: Offline Thanks Meter: 22	1208 contact service kind help with this 1208 contact service i full erase the phone then full flash but goes error on cnt using hwk i tried from highest version to lowest version but goes same error on cnt any solution for this? is it a hardware or software problem

05-29-2009, 19:12	#14 (permalink)
anajnisha Freak Poster Join Date: May 2009 Location: saharsa bihar Posts: 350 Member: 1033632 Status: Offline Sonork: [email protected] Thanks Meter: 62	contect service first clean your pcb and het it. second write good pm file 110% solved.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1200,1208,1208 Contact servic solution.Tested by me With JAF/UFS.	Dooha_Bd	Nokia Digital Core Technology 4 ( DCT-4 )	15	03-21-2013 04:36
help: nokia 1208 contact service	bamogil	Universalbox	55	11-26-2009 08:19
1208 contact service.1208 after flashing show's as contact service.................	dhineshh	Nokia Hardware & Hardware Repair	7	10-05-2009 17:09
1208 contact service 1208	mony_tornado200	Nokia Hardware & Hardware Repair	4	08-15-2008 20:34

05-28-2009, 05:46	#2 (permalink)
cel_phon No Life Poster Join Date: Jan 2009 Location: M_B_Din-PK Posts: 3,979 Member: 950201 Status: Offline Thanks Meter: 1,928	after flash unlock problem will be solve

05-28-2009, 05:47	#3 (permalink)
cel_phon No Life Poster Join Date: Jan 2009 Location: M_B_Din-PK Posts: 3,979 Member: 950201 Status: Offline Thanks Meter: 1,928	also perform '' SELF TEST ' may be LCD is not compatible

05-28-2009, 05:51	#4 (permalink)
CONCORDIA GSM No Life Poster Join Date: Dec 2005 Location: Roof of the world Posts: 3,580 Member: 209722 Status: Offline Thanks Meter: 818	[quote= goes error on cnt using hwk [/quote] repalce charging socket then flash again because of this unit cant go in local mode at cnt stage then software shows process failed.

05-28-2009, 05:54	#5 (permalink)
jollymolly Freak Poster Join Date: Mar 2009 Posts: 325 Member: 996684 Status: Offline Thanks Meter: 46	use easy cable to flash it

05-28-2009, 06:43	#6 (permalink)
afridi4all Freak Poster Join Date: Jun 2007 Location: pakistan Posts: 235 Member: 525998 Status: Offline Thanks Meter: 57	Try to Flash in Jaf...and unlock it ......hope ur problem will Ok

05-28-2009, 21:51	#8 (permalink)
MiChAGSM No Life Poster Join Date: Mar 2009 Location: Ecuador/Android Posts: 706 Member: 1001831 Status: Offline Sonork: 100.1594557 Thanks Meter: 1,405	unlock and go problem solved

05-28-2009, 21:54	#9 (permalink)
Linkpt Freak Poster Join Date: Jan 2008 Location: Lisboa.PT Age: 44 Posts: 217 Member: 691819 Status: Offline Sonork: 1601120 Thanks Meter: 65	Try to Flash with Easy Flasher cable. It will work, ant then unlock it. Tell us the result

05-29-2009, 03:32	#10 (permalink)
aboymaligalig Freak Poster Join Date: Mar 2007 Posts: 172 Member: 460316 Status: Offline Thanks Meter: 22	problem solve using jaf, disabled vpp, uncheck rpl208 then flash using 5.71 version then write pm then unlock then factory settings, thanks jaf. . .

05-29-2009, 11:14	#11 (permalink)
Major-T No Life Poster Join Date: Nov 2008 Location: Hate stupidity Posts: 1,907 Member: 904530 Status: Offline Thanks Meter: 517	after flashing already patched phone you will always have contact service because overwrite patch with original firmware. after flashing these phones need do unlock again. is this too hard to understand ? @ afridi4all your recomendations sounds like "if cannot drive, try to buy new car, maybe it helps"

05-30-2009, 02:24	#15 (permalink)
ranagaurav No Life Poster Join Date: Nov 2008 Location: gsm hosting Posts: 5,609 Member: 907098 Status: Offline Sonork: 100.1601140 Thanks Meter: 705	brother this is intel chip plz flash with ub only ub support intel chip i thing your problem is solv 1000% flash+write pm+unlocking+ui setting