5200 ERR: CMT 2ND Boot CMT 2ND CERT Mismatch
 

This is HWK log:

1ST BOOT : C0,07 [Rm-174] [2.0.7.2]
RAPx ID : 000000010000022600010006010C192101001101
EM 1 ID : 00000232
EM 2 ID : 0000FFFF
RAPx PBID : 15C00215DC3B005874BF9139E6EBD044B0D3E786
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 1.30.0
00000000: 02 00 00 00 00 F1 72 ......r
ERR: CMT 2ND Boot CMT 2ND CERT Mismatch
Rebooting Mobile

Tryed with 5 pin cable and 7 pin cable (Dual Line mode)

I think that is problem
EM 2 ID : 0000FFFF

Is there some hardware solution ?

And this is JAF log:

Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101001101
Asic Mode ID: 00
Asic EM ID: 0000FFFF
Asic Public ID: 15C00215DC3B005874BF9139E6EBD044B0D3E786
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 191EC665DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\UFS\rap3gv3_2nd.fg
Loader version: 01.10.02 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
Error in sending reading cmd...
Error in cmt get id...

Same tryed with 5pin and 7pin cables.

Asic EM ID: 0000FFFF

Apply some heat on RAP3G and Flash IC just below it.

Try and post result.

Br,
Shadab Ahmad

boy try this
 

well try with difernt cxable or use mt-box:confused::confused::confused::confused:

use the new ver flash files .

same with my 5200

1ST BOOT : C0,07 [Rm-174] [2.0.7.2]
RAPx ID : 000000010000022600010006010C192101001101
EM 1 ID : 00000232
EM 2 ID : 00000353
RAPx PBID : 06D0000B26506B56163F7D1D857C87E5E81069F7
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 1.30.0
00000000: 02 00 00 00 00 F1 72 ......r
ERR: CMT 2ND Boot CMT 2ND CERT Mismatch
Rebooting Mobile

-Use latest HWk suite
-Use Flash-Fix from support area and replace original files. For more info look here- http:///vbb/showthread.php?t=601180

not solved same possition any other solution plz

reball rap n flash, then flash it. set will b 100% ok

have you try to flashed it with JAF box???? check main PCB if drop phone ...

have you try to flashed it with JAF box???? check main PCB if drop phone ...

The solution is in this trad

http://forum.gsmhosting.com/vbb/showthread.php?t=601180