Anyone Flashed 3110c Inter Flash Chip Successfully? - GSM-Forum

[Shadab_M] · 05-11-2009, 06:54

Hi!

I request HWK Users to PLEASE post here information if they have Successfully Flashed Nokia 3110c having Intel Flash Chip (Int NU48F256).

Here are the conditions:
- You are using latest loaders - RAP3Gv3_2nd.fg (9.11.1) and RAP3Gv3_algo.fg (9.11.0).

- You do NOT use External VPP! (9v Battery)

What to post here:
- Flashing Log.
- UFS Type
- UFS Board Picture (Both Side) - If possible.
- Now if you have opened UFS, plese note down complete number of XILINX CR3032XL (It is 44 Pin IC just beside RJ45 Socket).
- Voltage Reading at RJ45 Socket. (From front side of UFS, left most Pin is Pin 1, so you will se Pin 7 as ground)

I again request all User to please co-operate.

Br,
Shadab Ahmad

[Shadab_M] · 05-11-2009, 12:46

@Moderators!

Please delete this thread as it is REALLY USELESS!

Either nobody has Flashed Successfully OR nobody is interested in this topic.

Sorry to All to post this kind of useless things here.

Br,
Shadab Ahmad

gsm.unlocker · 05-11-2009, 19:09

Quote:

Originally Posted by shadab_a4u

@Moderators!

Please delete this thread as it is REALLY USELESS!

Either nobody has Flashed Successfully OR nobody is interested in this topic.

Sorry to All to post this kind of useless things here.

Br,
Shadab Ahmad

................................
...................................
this is a promint for all of us .so keep on doing hard work shadab_a4 i personally think really u r doing hard work

tarik123456 · 05-11-2009, 19:34

CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT FLID0 : 00898981-00006A21, Int NU48F256
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 9.11.0
CMT KSIG0 : C0E691EA16A7593A9BB28832D7312A39F7ED668D
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
IMAGE : rm237__07.21.mcusw
CMT NOR Erase Area: 0x00000000-000006BF
CMT NOR Erase Area: 0x000006C0-0001FFFF
CMT NOR Erase Area: 0x00020000-0007FFFF
CMT NOR Erase Area: 0x00080000-000DFFFF
CMT NOR Erase Area: 0x00100000-001FFFFF
CMT NOR Erase Area: 0x00200000-0031FFFF
CMT NOR Erase Area: 0x00320000-0105FFFF
CMT NOR Erase Area: 0x01060000-01067FFF
CMT NOR Erase Area: 0x01068000-0107FFFF
CMT FLASH ERASE OK, Time: 01:17
DATA_BLK_ERROR at: 0x00020000, 00
ERR: CMT FLASH WRITE D_BLK 000000000000000910000000B172, LN: 0x000280, Time: 00:04
Process Failed, Repowering Mobile

where is the pb i use hwk 2.0.8.4

[Shadab_M] · 05-11-2009, 19:45

@tarik123456

I think you read about this problem in its discussion thread. Please check out.

It seems that you have not read my first post in this thread.

@Moderators
Please delete his post from here.

I will wait for HWK users to wake up. Even if they wake up after solution released by HWK Team.
They are working hard and even delayed next update to fix this problem.

ALL THE BEST - Sir Saras, Odia The Ultimate and GSMMunna!

NEITHER USELESS POSTS NOR THANKS NEEDED HERE!

Br,
Shadab Ahmad

[Shadab_M] · 05-12-2009, 20:48

No response from anyone after 90+ views

I think this thread is wasting space of this forum. It should be deleted now.

Br,
Shadab Ahmad

.:GSM International:. · 05-12-2009, 21:49

Quote:

Originally Posted by shadab_a4u

No response from anyone after 90+ views

I think this thread is wasting space of this forum. It should be deleted now.

Br,
Shadab Ahmad

I think you should just stop going on and wasting forum space mate. It will get deleted when/if they feel necessary!

bilm25 · 05-13-2009, 00:15

use the last loader RAP3Gv3_algo_9.17.0 and post resulte

atif ghumman · 05-14-2009, 17:29

Brother problem i sow with 3110c gentelman cmt eror let me i explan u use 7 pin cabel this phone cabel 3110c is own cabel but u must use 3500 cabel u have no problem

atif ghumman · 05-14-2009, 17:32

Quote:

Originally Posted by tarik123456

cmt 2nd bt: Rap3gv3_2nd.fg, ver: 9.11.1
cmt flid0 : 00898981-00006a21, int nu48f256
cmt flcnt : 00000000000000000000000000000000000000
cmt mcid0 : Ffff0000-00000000
cmt 2nd boot ok
cmt algo : Rap3gv3_algo.fg, ver: 9.11.0
cmt ksig0 : C0e691ea16a7593a9bb28832d7312a39f7ed668d
cmt vpp : Internal
dual line : True
cmt alg boot ok
image : Rm237__07.21.mcusw
cmt nor erase area: 0x00000000-000006bf
cmt nor erase area: 0x000006c0-0001ffff
cmt nor erase area: 0x00020000-0007ffff
cmt nor erase area: 0x00080000-000dffff
cmt nor erase area: 0x00100000-001fffff
cmt nor erase area: 0x00200000-0031ffff
cmt nor erase area: 0x00320000-0105ffff
cmt nor erase area: 0x01060000-01067fff
cmt nor erase area: 0x01068000-0107ffff
cmt flash erase ok, time: 01:17
data_blk_error at: 0x00020000, 00
err: Cmt flash write d_blk 000000000000000910000000b172, ln: 0x000280, time: 00:04
process failed, repowering mobile

where is the pb i use hwk 2.0.8.4

did u get my massge use 3500 cabel i sowlve this out

atif ghumman · 05-14-2009, 17:34

Quote:

Originally Posted by shadab_a4u

no response from anyone after 90+ views

i think this thread is wasting space of this forum. It should be deleted now.

Br,
shadab ahmad

yes it is me if u want know tel me

[Shadab_M] · 05-14-2009, 19:17

Quote:

Originally Posted by atif ghumman

yes it is me if u want know tel me

Bro,

If you please post all the details as described in very first post of this thread.

Br,
Shadab Ahmad

alamgir80 · 05-16-2009, 15:54

Quote:

Originally Posted by shadab_a4u

Hi!

I request HWK Users to PLEASE post here information if they have Successfully Flashed Nokia 3110c having Intel Flash Chip (Int NU48F256).

Here are the conditions:
- You are using latest loaders - RAP3Gv3_2nd.fg (9.11.1) and RAP3Gv3_algo.fg (9.11.0).

No problem log here

1ST BOOT : C0,07 [Rm-237] [2.0.8.4]
RAPx ID : 000000010000022600010006010C192101001101
EM 1 ID : 00000232
EM 2 ID : 00000353
RAPx PBID : 2A900114A02F7C569F6CD4410848345EBD6CABF1
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT FLID0 : 00898981-00006A21, Int NU48F256
CMT FLCNT : 000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 9.17.0
CMT VPP : External
DUAL LINE : True
CMT ALG Boot OK
IMAGE : rm237__07.21.mcusw
CMT NOR Erase Area: 0x00000000-000006BF
CMT NOR Erase Area: 0x000006C0-0001FFFF
CMT NOR Erase Area: 0x00020000-0007FFFF
CMT NOR Erase Area: 0x00080000-000DFFFF
CMT NOR Erase Area: 0x00100000-001FFFFF
CMT NOR Erase Area: 0x00200000-0031FFFF
CMT NOR Erase Area: 0x00320000-0105FFFF
CMT NOR Erase Area: 0x01060000-01067FFF
CMT NOR Erase Area: 0x01068000-0107FFFF
CMT FLASH ERASE OK, Time: 01:06
Written: 10 Certificate(s)
CMT FLASH WRITE OK, Time: 01:27
1ST BOOT : C0,07 [Rm-237] [2.0.8.4]
RAPx ID : 000000010000022600010006010C192101001101
EM 1 ID : 00000232
EM 2 ID : 00000353
RAPx PBID : 2A900114A02F7C569F6CD4410848345EBD6CABF1
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT FLID0 : 00898981-00006A21, Int NU48F256
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 9.17.0
CMT KSIG0 : C0E691EA16A7593A9BB28832D7312A39F7ED668D
CMT VPP : External
DUAL LINE : True
CMT ALG Boot OK
Chip SECTOR_SIZE: 128k
Warning, Must be Used 128Kb Sector_Size CNT File
IMAGE : rm237__07.21.image_mr_ny_128
CMT NOR Erase Area: 0x01520000-01FDFFFF
CNT FLASH ERASE OK, Time: 00:50
CNT FLASH WRITE OK, Time: 00:21
1ST BOOT : C0,07 [Rm-237] [2.0.8.4]
RAPx ID : 000000010000022600010006010C192101001101
EM 1 ID : 00000232
EM 2 ID : 00000353
RAPx PBID : 2A900114A02F7C569F6CD4410848345EBD6CABF1
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT FLID0 : 00898981-00006A21, Int NU48F256
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 9.17.0
CMT KSIG0 : C0E691EA16A7593A9BB28832D7312A39F7ED668D
CMT VPP : External
DUAL LINE : True
CMT ALG Boot OK
IMAGE : rm237__07.21.ppm_mr
CMT NOR Erase Area: 0x01080000-0151FFFF
PPM FLASH ERASE OK, Time: 00:19
PPM FLASH WRITE OK, Time: 00:21
Flashing Completed, Rebooting Mobile

[Shadab_M] · 05-16-2009, 16:56

@alamgir80!

Bro! You have missed condition number 2.

Quote:

- You do NOT use External VPP! (9v Battery)

Btw, thanx for your post.

Br,
Shadab Ahmad

Drajad · 05-17-2009, 02:44

1ST BOOT : C0,07 [Rm-237] [2.0.8.4]
RAPx ID : 000000010000022600010006010C192101001101
EM 1 ID : 00000232
EM 2 ID : 00000353
RAPx PBID : 2060020276B97C56C63C040AA45D37BBF50CBF89
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT FLID0 : 00898981-00006A21, Int NU48F256
CMT FLCNT : 000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 9.11.0
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
IMAGE : rm237__05.01.mcusw
CMT NOR Erase Area: 0x00000000-000006BF
CMT NOR Erase Area: 0x000006C0-0001FFFF
CMT NOR Erase Area: 0x00020000-0007FFFF
CMT NOR Erase Area: 0x00080000-000DFFFF
CMT NOR Erase Area: 0x00100000-001FFFFF
CMT NOR Erase Area: 0x00200000-0031FFFF
CMT NOR Erase Area: 0x00320000-0105FFFF
CMT NOR Erase Area: 0x01060000-01067FFF
CMT NOR Erase Area: 0x01068000-0107FFFF
CMT FLASH ERASE OK, Time: 00:01
DATA_BLK_ERROR at: 0x00020000, 00
ERR: CMT FLASH WRITE D_BLK 000000000000000910000000B172, LN: 0x000280, Time: 00:04
Process Failed, Repowering Mobile

With UFS Tornado + HWK
Xilinx XR3032XL

I thing this box problem
If I flash with PKEY + UFS

Sending CRT data...
Error in RD cmd...
Error preparing flashing...

If Flash with PKEY + JAF Box ==> No Problem

Give me the solution...............

05-11-2009, 06:54	#1 (permalink)
[Shadab_M] No Life Poster Join Date: Mar 2006 Location: .: India :. Heaven on Earth Posts: 2,496 Member: 238812 Status: Offline Sonork: 100.1602669 Thanks Meter: 1,443	Anyone Flashed 3110c Inter Flash Chip Successfully? Hi! I request HWK Users to PLEASE post here information if they have Successfully Flashed Nokia 3110c having Intel Flash Chip (Int NU48F256). Here are the conditions: - You are using latest loaders - RAP3Gv3_2nd.fg (9.11.1) and RAP3Gv3_algo.fg (9.11.0). - You do NOT use External VPP! (9v Battery) What to post here: - Flashing Log. - UFS Type - UFS Board Picture (Both Side) - If possible. - Now if you have opened UFS, plese note down complete number of XILINX CR3032XL (It is 44 Pin IC just beside RJ45 Socket). - Voltage Reading at RJ45 Socket. (From front side of UFS, left most Pin is Pin 1, so you will se Pin 7 as ground) I again request all User to please co-operate. Br, Shadab Ahmad

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3110c flashing problem use old chip	rohit50	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	4	08-20-2009 23:33
how i can flash or format sky chip & om chip	.::ricky rayya::.	Infinity-Box	2	06-04-2008 21:54
3110c usb flashing successful in MT-BOX	rkinfo_imran	MT-BOX	0	11-27-2007 23:35
M55 Flash Patch -Anyone´s got full modded flashes ready for flash--??	Uvedovle	x4x, x5x Flashpatching	0	04-27-2004 10:32

05-11-2009, 12:46	#2 (permalink)
[Shadab_M] No Life Poster Join Date: Mar 2006 Location: .: India :. Heaven on Earth Posts: 2,496 Member: 238812 Status: Offline Sonork: 100.1602669 Thanks Meter: 1,443	@Moderators! Please delete this thread as it is REALLY USELESS! Either nobody has Flashed Successfully OR nobody is interested in this topic. Sorry to All to post this kind of useless things here. Br, Shadab Ahmad

05-11-2009, 19:34	#4 (permalink)
tarik123456 Freak Poster Join Date: May 2005 Location: algeria Age: 52 Posts: 128 Member: 148017 Status: Offline Sonork: 1608728 Thanks Meter: 17	CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1 CMT FLID0 : 00898981-00006A21, Int NU48F256 CMT FLCNT : 00000000000000000000000000000000000000 CMT MCID0 : FFFF0000-00000000 CMT 2ND Boot OK CMT ALGO : RAP3Gv3_algo.fg, Ver: 9.11.0 CMT KSIG0 : C0E691EA16A7593A9BB28832D7312A39F7ED668D CMT VPP : Internal DUAL LINE : True CMT ALG Boot OK IMAGE : rm237__07.21.mcusw CMT NOR Erase Area: 0x00000000-000006BF CMT NOR Erase Area: 0x000006C0-0001FFFF CMT NOR Erase Area: 0x00020000-0007FFFF CMT NOR Erase Area: 0x00080000-000DFFFF CMT NOR Erase Area: 0x00100000-001FFFFF CMT NOR Erase Area: 0x00200000-0031FFFF CMT NOR Erase Area: 0x00320000-0105FFFF CMT NOR Erase Area: 0x01060000-01067FFF CMT NOR Erase Area: 0x01068000-0107FFFF CMT FLASH ERASE OK, Time: 01:17 DATA_BLK_ERROR at: 0x00020000, 00 ERR: CMT FLASH WRITE D_BLK 000000000000000910000000B172, LN: 0x000280, Time: 00:04 Process Failed, Repowering Mobile where is the pb i use hwk 2.0.8.4

05-11-2009, 19:45	#5 (permalink)
[Shadab_M] No Life Poster Join Date: Mar 2006 Location: .: India :. Heaven on Earth Posts: 2,496 Member: 238812 Status: Offline Sonork: 100.1602669 Thanks Meter: 1,443	@tarik123456 I think you read about this problem in its discussion thread. Please check out. It seems that you have not read my first post in this thread. @Moderators Please delete his post from here. I will wait for HWK users to wake up. Even if they wake up after solution released by HWK Team. They are working hard and even delayed next update to fix this problem. ALL THE BEST - Sir Saras, Odia The Ultimate and GSMMunna! NEITHER USELESS POSTS NOR THANKS NEEDED HERE! Br, Shadab Ahmad

05-12-2009, 20:48	#6 (permalink)
[Shadab_M] No Life Poster Join Date: Mar 2006 Location: .: India :. Heaven on Earth Posts: 2,496 Member: 238812 Status: Offline Sonork: 100.1602669 Thanks Meter: 1,443	No response from anyone after 90+ views I think this thread is wasting space of this forum. It should be deleted now. Br, Shadab Ahmad

05-13-2009, 00:15	#8 (permalink)
bilm25 No Life Poster Join Date: Aug 2004 Location: Algeria Age: 47 Posts: 568 Member: 78657 Status: Offline Thanks Meter: 71	use the last loader RAP3Gv3_algo_9.17.0 and post resulte

05-14-2009, 17:29	#9 (permalink)
atif ghumman Insane Poster Join Date: Jun 2006 Posts: 64 Member: 295720 Status: Offline Thanks Meter: 6	Brother problem i sow with 3110c gentelman cmt eror let me i explan u use 7 pin cabel this phone cabel 3110c is own cabel but u must use 3500 cabel u have no problem

05-17-2009, 02:44	#15 (permalink)
Drajad Insane Poster Join Date: Apr 2006 Location: Indonesia Posts: 77 Member: 267448 Status: Offline Thanks Meter: 10	1ST BOOT : C0,07 [Rm-237] [2.0.8.4] RAPx ID : 000000010000022600010006010C192101001101 EM 1 ID : 00000232 EM 2 ID : 00000353 RAPx PBID : 2060020276B97C56C63C040AA45D37BBF50CBF89 RAPx MODE : 00 RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 RAPx ROID : 191EC665DFAAF68F CMT 1ST Boot OK CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1 CMT FLID0 : 00898981-00006A21, Int NU48F256 CMT FLCNT : 000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF CMT MCID0 : FFFF0000-00000000 CMT 2ND Boot OK CMT ALGO : RAP3Gv3_algo.fg, Ver: 9.11.0 CMT VPP : Internal DUAL LINE : True CMT ALG Boot OK IMAGE : rm237__05.01.mcusw CMT NOR Erase Area: 0x00000000-000006BF CMT NOR Erase Area: 0x000006C0-0001FFFF CMT NOR Erase Area: 0x00020000-0007FFFF CMT NOR Erase Area: 0x00080000-000DFFFF CMT NOR Erase Area: 0x00100000-001FFFFF CMT NOR Erase Area: 0x00200000-0031FFFF CMT NOR Erase Area: 0x00320000-0105FFFF CMT NOR Erase Area: 0x01060000-01067FFF CMT NOR Erase Area: 0x01068000-0107FFFF CMT FLASH ERASE OK, Time: 00:01 DATA_BLK_ERROR at: 0x00020000, 00 ERR: CMT FLASH WRITE D_BLK 000000000000000910000000B172, LN: 0x000280, Time: 00:04 Process Failed, Repowering Mobile With UFS Tornado + HWK Xilinx XR3032XL I thing this box problem If I flash with PKEY + UFS Sending CRT data... Error in RD cmd... Error preparing flashing... If Flash with PKEY + JAF Box ==> No Problem Give me the solution...............