B100 showing as B108 - GSM-Forum

Frenzy_2020 · 07-15-2009, 15:08

Hi guys,

I think someone tried to flash the phone but flashed it with a wrong firmware..but now wen i try to flash it with the right one it get the following

Code:

Region: 1, 0x00000000-0x000007DF, Length: 2016 bytes
Region: 2, 0x00004000-0x00006897, Length: 10392 bytes
Region: 3, 0x00020000-0x00020003, Length: 4 bytes
Region: 4, 0x00021000-0x0096A39B, Length: 9737116 bytes
1st Boot Ok, McuId: 000603EE, Rom: 00004B45, 5-1.0 (Trident 2)
2nd Boot Ok, McuId: 000603EE, Rom: 00004B45, 2-1.1
TER POW:DONE 
FlashLoader Failed: Flsync

also the IMEI is bad

....if i try to rebuild it says failed..how to fix this phone

thanks in advance

Frenzy

[Shadab_M] · 07-15-2009, 15:43

Bro!

Try different baud rates.

It should solve your problem. If not, chances are that your phone has Flash IC problem.

Br,
Shadab Ahmad

Odia The Ultimate · 07-16-2009, 13:46

Quote:

Originally Posted by Frenzy_2020

Hi guys,

I think someone tried to flash the phone but flashed it with a wrong firmware..but now wen i try to flash it with the right one it get the following

Code:

Region: 1, 0x00000000-0x000007DF, Length: 2016 bytes
Region: 2, 0x00004000-0x00006897, Length: 10392 bytes
Region: 3, 0x00020000-0x00020003, Length: 4 bytes
Region: 4, 0x00021000-0x0096A39B, Length: 9737116 bytes
1st Boot Ok, McuId: 000603EE, Rom: 00004B45, 5-1.0 (Trident 2)
2nd Boot Ok, McuId: 000603EE, Rom: 00004B45, 2-1.1
TER POW:DONE 
FlashLoader Failed: Flsync

also the IMEI is bad

....if i try to rebuild it says failed..how to fix this phone

thanks in advance

Frenzy

What happens if you try to flash as B108 does it at least flash?

About IMEI you need to use Repair MSL.

Odia.

Frenzy_2020 · 07-17-2009, 06:53

well i tried to flash B108 it flashed the phone....fully and the phone turns On and how as B108....

07-15-2009, 15:08	#1 (permalink)
Frenzy_2020 No Life Poster Join Date: Jun 2008 Location: Wish i was on Mars Age: 40 Posts: 1,686 Member: 789089 Status: Offline Sonork: 100.1617*** Thanks Meter: 267	B100 showing as B108 Hi guys, I think someone tried to flash the phone but flashed it with a wrong firmware..but now wen i try to flash it with the right one it get the following Code: Region: 1, 0x00000000-0x000007DF, Length: 2016 bytes Region: 2, 0x00004000-0x00006897, Length: 10392 bytes Region: 3, 0x00020000-0x00020003, Length: 4 bytes Region: 4, 0x00021000-0x0096A39B, Length: 9737116 bytes 1st Boot Ok, McuId: 000603EE, Rom: 00004B45, 5-1.0 (Trident 2) 2nd Boot Ok, McuId: 000603EE, Rom: 00004B45, 2-1.1 TER POW:DONE FlashLoader Failed: Flsync also the IMEI is bad ....if i try to rebuild it says failed..how to fix this phone thanks in advance Frenzy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k800i shows as k610i during identify operation-help	zonetrichur	SETool2	8	03-06-2010 19:43
se k810i cid53 gdfs shows as k700	kb8to24	Sony Ericsson	2	07-20-2008 00:32
N70 don't show as "drive"	Robin_Hood	Nokia Hardware & Hardware Repair	0	01-29-2006 18:57
Twister show as Tornado in GUI Top Left	Odia The Ultimate	Twisterflasher	3	08-07-2004 23:42

07-15-2009, 15:43	#2 (permalink)
[Shadab_M] No Life Poster Join Date: Mar 2006 Location: .: India :. Heaven on Earth Posts: 2,496 Member: 238812 Status: Offline Sonork: 100.1602669 Thanks Meter: 1,443	Bro! Try different baud rates. It should solve your problem. If not, chances are that your phone has Flash IC problem. Br, Shadab Ahmad

07-17-2009, 06:53	#4 (permalink)
Frenzy_2020 No Life Poster Join Date: Jun 2008 Location: Wish i was on Mars Age: 40 Posts: 1,686 Member: 789089 Status: Offline Sonork: 100.1617*** Thanks Meter: 267	well i tried to flash B108 it flashed the phone....fully and the phone turns On and how as B108....