Can't unlock samsung S3650 - GSM-Forum

said4 · 03-25-2010, 12:17

Hi, All
Can't unlcok samsung S3650
Mobile Info: OK
but QCDI info: Bad

log here:

Mobile info:

Code:

PING: OK, COM10 - MODEM
Product : GT-S3650
Software: SS_21331_Corby_SW_Release_SI1.3.30_V6.0_R1.0
Software: S3650AEII4
Regions : SFR - France
Language: de,en,es,fr,it,nl,pt,tr                               
Release : 2009 September Rev: 4
Hardware: MP 0.600
Cal Date: 2009.10.16
IMEI: 356759-03-16xxxx-8
S/N : RVWSA02224
BTID: A0 07 98 2C 63 20

UNID: 80210000279676
FLID: K522H1HACC(S3650)
SECC: -
CCOD: SFR
Sysinfo Saved as:
S3650AEII4_35675903166xxxx_RVWSA02224_80210000279676_47905CD9_Sys.sec
Use [QCDI Info] to get Network Keys:
Connect RJ-45 Cable to Switched Off Phone and press [QCDI Info]

QCDI info: COMM_BR: 921600 Baud

and no thing else
Please help.
Thanks in advance

quasim0438 · 03-25-2010, 12:33

when mobile info got successful and sysinfo saved.after that plug e210 cable in box,turn off mobile and connect mobile with box without battery.......click QCDI INFO and suddenly put battery in mobile...it will boot and finally calculate codes in a few minutes....I had to wait 7 minutes....

ymamine · 03-25-2010, 12:57

after reading information withe usb cable ;use rj45 pawor of phone and poute rj45 than pawor on it goes in boute loader mode just wait calculation code
PING: OK, COM31 - MODEM
Product : GT-S3650
Software: SS_21331_Corby_SW_Release_SI1.3.30_V6.0_R1.0
Software: S3650PEII1
Regions : PE
Language: de,en,es,fr,it,nl,pt,tr
Release : 2009 September Rev: 1
Hardware: MP 0.602
Cal Date: 2009.10.26
IMEI: 358568-03-:
S/N : R6WSA91887
BTID: A0 07 98 77 D7 F1

UNID: 74480000127916
FLID: K522H1HACC(S3650)
SECC: -
CCOD: VGF
Sysinfo Saved as:
S3650PEII1_3585680_R6WSA91887_74480000127916_F0CBD F08_Sys.sec
Use [QCDI Info] to get Network Keys:
Connect RJ-45 Cable to Switched Off Phone and press [QCDI Info]
NAND_ID: BA
COMM_BR: 115200 Baud
FLAG: 00000009
PROV: 20801
PROV: 208-01 FTM (Orange), France
NET : 40274141 [#SIMLOCK*NET*40274141#]
SP : 28397202 [#SIMLOCK*SP*28397202#]

said4 · 03-25-2010, 13:17

Quote:

Originally Posted by quasim0438

when mobile info got successful and sysinfo saved.after that plug e210 cable in box,turn off mobile and connect mobile with box without battery.......click QCDI INFO and suddenly put battery in mobile...it will boot and finally calculate codes in a few minutes....I had to wait 7 minutes....

I have done wht you said but not success

I have good cable ofcourse

see I have unlocked E1120 :

Code:

Connect Cable to Switched Off Mobile (with battery)
Software: E1120AEID2
Hardware: MP 0.501
Regions : SFR - France
Language: de,en,es,fr,it,nl,pt,tr                               
Release : 2009 April Rev: 2
S/N : RU1S476232
IMEI: 359804-02-30xxxx-7
MSL Active
MSL Deactivated
Flags: 00000001  [Locked]
Key M: 29596930  [MASTER]
Prov : 208-10 SFR, France
Key 1: 66487330, 00000000 [NET]
Key 2: 00000000, 00000000 
Key 3: 00000000, 00000000 
Key 4: 00000000, 00000000 
Key 5: 00000000, 00000000 
Key 6: 00000000, 00000000 
Key 7: 00000000, 00000000

Fys · 03-27-2010, 11:01

I have same problem like said4...need solution.Tanks

Fys · 03-27-2010, 12:55

For me work and enter boot loader mode after *2767*3855#....Good luck

sabby_singh · 03-27-2010, 14:13

If not able to read code then flash it

***THE CLASH*** · 03-27-2010, 14:32

s3650 unlock..

NAND_ID: BA
COMM_BR: 921600 Baud
FLAG: 00000001
PROV:
NET : 84909528 [#SIMLOCK*NET*84909528#]

the only way i can get this to work is ,,Plug cable into Phone **AFTER ** QCDI INFO
button is Pressed...
i use dual RJ45/usb cable. hope this of help to others..
UST-Pro shame on You.

said4 · 03-27-2010, 21:09

Hi, All
problem solved with new minnor update.
Thanks to THE ACLASH for info too:

COMM_BR: 921600 Baud
FLAG: 00000001
PROV: 2081064710
PROV: 208-10 SFR, France
MAST: 50570929 [UNFREEZE]
NET : 70516838 [#SIMLOCK*NET*70516838#]

Big thanks to HWK Team

said4 · 03-28-2010, 08:30

Hi, all
It's time to say BYE BYE USTpro and Z3Box is not it?

Code:

PING: OK, COM14 - MODEM
Product : GT-S3650
Software: SS_21331_Corby_SW_Release_SI1.3.30_V6.0_R1.0
Software: S3650BVII5_II6
Regions : Orange - Switzerland
Language: de,en,es,fr,hu,it,nl,pl,pt,ro,sl,tr                   
Release : 2009 September Rev: 5
Hardware: MP 0.600
Cal Date: 2009.10.13
IMEI: 354881-03-97xxxx-4
S/N : R2XSA03085
BTID: A0 07 98 60 8E E3

UNID: 80240001473729
FLID: K522H1HACC(S3650)
SECC: -
CCOD: FTM
Sysinfo Saved as:
S3650BVII5_II6_3548810397xxxx4_R2XSA03085_80240001473729_A1F92609_Sys.sec
Use [QCDI Info] to get Network Keys:
Connect RJ-45 Cable to Switched Off Phone and press [QCDI Info]
 



COMM_BR: 921600 Baud
FLAG: 00000001
PROV: 208013400164700
PROV: 208-01 FTM (Orange), France
MAST: 46463139 [UNFREEZE]
NET : 14815908 [#SIMLOCK*NET*14815908#]

ags_nadhif · 03-28-2010, 09:12

Quote:

Originally Posted by said4

Hi, all
It's time to say BYE BYE USTpro and Z3Box is not it?

Code:

PING: OK, COM14 - MODEM
Product : GT-S3650
Software: SS_21331_Corby_SW_Release_SI1.3.30_V6.0_R1.0
Software: S3650BVII5_II6
Regions : Orange - Switzerland
Language: de,en,es,fr,hu,it,nl,pl,pt,ro,sl,tr                   
Release : 2009 September Rev: 5
Hardware: MP 0.600
Cal Date: 2009.10.13
IMEI: 354881-03-97xxxx-4
S/N : R2XSA03085
BTID: A0 07 98 60 8E E3

UNID: 80240001473729
FLID: K522H1HACC(S3650)
SECC: -
CCOD: FTM
Sysinfo Saved as:
S3650BVII5_II6_3548810397xxxx4_R2XSA03085_80240001473729_A1F92609_Sys.sec
Use [QCDI Info] to get Network Keys:
Connect RJ-45 Cable to Switched Off Phone and press [QCDI Info]
 



COMM_BR: 921600 Baud
FLAG: 00000001
PROV: 208013400164700
PROV: 208-01 FTM (Orange), France
MAST: 46463139 [UNFREEZE]
NET : 14815908 [#SIMLOCK*NET*14815908#]

yeah... great new.
I dissapointed ustpro
expensive box but ..dissapointed the custume

irfan99 · 04-01-2010, 15:28

from where i can get drivers and do i have to put phone in bootlaoder mode to read info via usb

***THE CLASH*** · 04-01-2010, 20:29

You must swap cables,,, software tells you what to do..

sonumobilewala · 04-03-2010, 08:43

first use orignal usb cable and after that use rj45 c450 cable

and wait for few mins

03-25-2010, 12:57	#3 (permalink)
ymamine Freak Poster Join Date: Mar 2004 Location: algeria constantine Age: 46 Posts: 154 Member: 56571 Status: Offline Thanks Meter: 23	done s3650 with hwk after reading information withe usb cable ;use rj45 pawor of phone and poute rj45 than pawor on it goes in boute loader mode just wait calculation code PING: OK, COM31 - MODEM Product : GT-S3650 Software: SS_21331_Corby_SW_Release_SI1.3.30_V6.0_R1.0 Software: S3650PEII1 Regions : PE Language: de,en,es,fr,it,nl,pt,tr Release : 2009 September Rev: 1 Hardware: MP 0.602 Cal Date: 2009.10.26 IMEI: 358568-03-: S/N : R6WSA91887 BTID: A0 07 98 77 D7 F1 UNID: 74480000127916 FLID: K522H1HACC(S3650) SECC: - CCOD: VGF Sysinfo Saved as: S3650PEII1_3585680_R6WSA91887_74480000127916_F0CBD F08_Sys.sec Use [QCDI Info] to get Network Keys: Connect RJ-45 Cable to Switched Off Phone and press [QCDI Info] NAND_ID: BA COMM_BR: 115200 Baud FLAG: 00000009 PROV: 20801 PROV: 208-01 FTM (Orange), France NET : 40274141 [#SIMLOCKNET40274141#] SP : 28397202 [#SIMLOCKSP28397202#]

03-27-2010, 21:09	#9 (permalink)
said4 No Life Poster Join Date: Feb 2006 Location: Madagascar Posts: 2,851 Member: 233142 Status: Offline Sonork: 100.1595099 Thanks Meter: 527	at laste the prob solved Hi, All problem solved with new minnor update. Thanks to THE ACLASH for info too: COMM_BR: 921600 Baud FLAG: 00000001 PROV: 2081064710 PROV: 208-10 SFR, France MAST: 50570929 [UNFREEZE] NET : 70516838 [#SIMLOCKNET70516838#] Big thanks to HWK Team

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[can't unlock] Samsung Z150 UNLOCK Problem with Z3x	chatfan	Z3X-Team Products	3	02-22-2010 09:14
secsufly unlock samsung s3650	kakaomar	Z3X-Team Products	0	02-02-2010 19:25
can't unlock GT-S3650	Lpapp	UST Pro II	2	11-11-2009 21:09
Can't unlock Samsung E 315,316,317 with UFS-3 Tornado	v205sam	UFS2 + UFS3-Tornadoflasher	9	06-22-2005 19:53
I can't unlock Samsung R210	Novoinfo	VLSI, Conexant, Skyworks and Old Models	4	02-22-2002 13:00

03-25-2010, 12:33	#2 (permalink)
quasim0438 No Life Poster Join Date: Feb 2006 Location: P A K I S T A N Age: 42 Posts: 739 Member: 237155 Status: Online Thanks Meter: 415	when mobile info got successful and sysinfo saved.after that plug e210 cable in box,turn off mobile and connect mobile with box without battery.......click QCDI INFO and suddenly put battery in mobile...it will boot and finally calculate codes in a few minutes....I had to wait 7 minutes....

03-27-2010, 11:01	#5 (permalink)
Fys Freak Poster Join Date: Feb 2004 Location: Bucuresti Age: 47 Posts: 150 Member: 54294 Status: Offline Thanks Meter: 18	I have same problem like said4...need solution.Tanks

03-27-2010, 12:55	#6 (permalink)
Fys Freak Poster Join Date: Feb 2004 Location: Bucuresti Age: 47 Posts: 150 Member: 54294 Status: Offline Thanks Meter: 18	For me work and enter boot loader mode after 27673855#....Good luck

03-27-2010, 14:13	#7 (permalink)
sabby_singh Registered User Join Date: Dec 2004 Location: largest democratic country Posts: 801 Member: 100376 Status: Offline Sonork: 100.1591842 Thanks Meter: 150	If not able to read code then flash it

03-27-2010, 14:32	#8 (permalink)
*THE CLASH* Super Moderator Join Date: Aug 2005 Location: UK.... Age: 57 Posts: 6,030 Member: 173077 Status: Offline Sonork: 100.1594293 Thanks Meter: 2,784	s3650 unlock.. NAND_ID: BA COMM_BR: 921600 Baud FLAG: 00000001 PROV: NET : 84909528 [#SIMLOCKNET84909528#] the only way i can get this to work is ,,Plug cable into Phone AFTER QCDI INFO button is Pressed... i use dual RJ45/usb cable. hope this of help to others.. UST-Pro shame on You.

04-01-2010, 15:28	#12 (permalink)
irfan99 No Life Poster Join Date: Mar 2006 Location: Pakistan Peshawar Age: 35 Posts: 1,170 Member: 242264 Status: Offline Sonork: 100.1582011 Thanks Meter: 33	from where i can get drivers and do i have to put phone in bootlaoder mode to read info via usb

04-01-2010, 20:29	#13 (permalink)
*THE CLASH* Super Moderator Join Date: Aug 2005 Location: UK.... Age: 57 Posts: 6,030 Member: 173077 Status: Offline Sonork: 100.1594293 Thanks Meter: 2,784	You must swap cables,,, software tells you what to do..

04-03-2010, 08:43	#14 (permalink)
sonumobilewala No Life Poster Join Date: Jun 2006 Location: sangam music Punjab India Age: 38 Posts: 1,402 Member: 296651 Status: Offline Sonork: 100.1581376 Thanks Meter: 386	first use orignal usb cable and after that use rj45 c450 cable and wait for few mins