LG C105 need pcb pinout - GSM-Forum

yurais · 06-15-2011, 06:47

I have tried to conenct this set via USB and it give a strange error while readng the phone while booting.

via Rj45 cable could not connect either, tried with same cable used minutes before to unlock GS290.

someone can tell me how to connect via PCB pins near the sim card slot?

picioso · 07-19-2011, 00:16

rx is the 4 pin
tx 1 pin
counting to 1firs pin the sim

gsm.jaouat · 01-30-2012, 13:33

hi
the first pin is tx
2 pin is rx

celltellpb · 04-03-2012, 02:03

Please help me , I'm also needing to know the proper pin to solder the wires tx and rx on board C105

elvisfaria · 04-03-2012, 16:35

Quote:

Originally Posted by celltellpb

Please help me , I'm also needing to know the proper pin to solder the wires tx and rx on board C105

good morning to all of the forun! I was with a friend C105 lg q to stop the flash he died! I tried to upgrade by Vygis and the HWK RJ45 cable and usb but without success, could not pinning universal cable tried to flash by setool TOOL LGE in the program and it worked first with the usb cable without battery! I hope to help

celltellpb · 04-03-2012, 17:06

I connected the C105 in lg usb without battery and pc only recognizes as "intel usb flash loader utility", and not generated any COM PORT

06-15-2011, 06:47	#1 (permalink)
yurais No Life Poster Join Date: Jan 2006 Location: Santiago de Cuba Age: 46 Posts: 3,672 Member: 220595 Status: Online Thanks Meter: 355	LG C105 need pcb pinout I have tried to conenct this set via USB and it give a strange error while readng the phone while booting. via Rj45 cable could not connect either, tried with same cable used minutes before to unlock GS290. someone can tell me how to connect via PCB pins near the sim card slot?

07-19-2011, 00:16	#2 (permalink)
picioso Freak Poster Join Date: Feb 2007 Location: CUAUHTEMOC Posts: 161 Member: 455745 Status: Offline Thanks Meter: 26	rx and tx rx is the 4 pin tx 1 pin counting to 1firs pin the sim

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
needed pinout for carkit(N61xx)	mobileinfo	Nokia Hardware & Hardware Repair	2	07-23-2013 02:41
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:04
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35

01-30-2012, 13:33	#3 (permalink)
gsm.jaouat Junior Member Join Date: Jul 2007 Posts: 23 Member: 548908 Status: Offline Thanks Meter: 10	hi the first pin is tx 2 pin is rx

04-03-2012, 02:03	#4 (permalink)
celltellpb No Life Poster Join Date: Jan 2008 Location: Pb - BRAZIL Posts: 640 Member: 689942 Status: Offline Thanks Meter: 312	Please help me , I'm also needing to know the proper pin to solder the wires tx and rx on board C105