Flashing a 6280 CMT 1st Boot Err: Bad Resp RAPx, - GSM-Forum

DjSwift · 01-15-2007, 21:35

I did try search and i tried what everyone did

I even reinstalled v.3.0 etc and re installed all!

I get this
CMT 1st Boot Err: Bad Resp RAPx,
Process Failed, Repowering Mobile

WHy ??

What is it ?

Surely not a cable problem because i got a brand new cable!!

I tried ticking unticking vpp and using vpp cable

I CAN get the phone in local/test mode which isnt a problem. It even reads the phone and shows me the sw version etc..

But when it comes to flash it
CMT 1st Boot Err: Bad Resp RAPx,
Process Failed, Repowering Mobile

Please help me as i noticed that my sara box hasnt been able to serve me for 2 month now as i tend to use other solutions. But i paid good money for this and i beleive it should work!!!

So anyone please help me out.

DJ

DjSwift · 01-16-2007, 21:26

ok I hardly ask for help here.
I am a loyal HWK customer for quite some time and My stuff is only original

What do I have to do to get some answers here?

Any help advised?

I paid around £200 for these things and never suceeded in flashing BB5.

So a little light my way would help and I direct this towards the product supporters for HWK!.

If there is any information you need please let me know. As right now I beleive i could have invested into something else where I would actually get some kind of support

DJ

SpoOnx · 01-17-2007, 00:15

that´s hardware problem with your phone not with your box, try to rehoot Rapx and flash it again

::Yasir:: · 01-18-2007, 06:33

Nope. I have a new 6280 and the same prob!!! Now are u going to tell me that problem is with my phone?? Irrelevant!! HWK fails @ flashing BB5. Yes it is a useful tool based on multi platform but it's not good @ flashing bb5

DjSwift · 01-18-2007, 08:58

Lol
you always get someone to say re hot the phone blah blah

thats utter BS

THERE IS NO PROBLEM WITH THE PHONE COZ I SUCESSFULLY FLASHED IT TO 5.92 WITH PHOENIX!!!!

Had it started flashing in hwk and failed, then i might route it down to hardware issues with the handset

@Spoonx.. thats crap advice
No offense

Anyways, i hope HWK sort themselves out

since im going to invest in other things now

I thought that i might get some kind of help from the actual people who support the product

oBviously not

I know not to waste my valuable money now

DJ

XisiX · 01-18-2007, 19:04

Quote:

Originally Posted by DjSwift

I thought that i might get some kind of help from the actual people who support the product

oBviously not

I know not to waste my valuable money now

DJ

UFS/HWK Team:

1. Saras. The programmer. Don't expect from him to waiste his time answering to (so many) questions.
2. Odia The Ultimate. Supporter. He is here doing his best trying to help, but he is only one person; he can't read&answer to all of us.
3. .... Ops, sorry, seems like there is no one further in the list at the moment.

You got a picture?

harisha g h · 02-19-2007, 13:48

I too have same complent with 6681, my cable is 100% working is it hardware or software plz reply hwk teem thanks in advance.

CMT 1st Boot Err: Bad Resp RAPx,
Process Failed, Repowering Mobile

matrix05300 · 02-19-2007, 14:06

for sure it's a cable problem, or maybe HWK

i flash BB5 phone without any problem

for some model (like 6630) i use VPP generator, for others (N80) direct cable

check your cable resistors

WBR

SM4RTBOY · 02-25-2007, 05:44

to solve your all probs you should think first what you want !

so my experience .

istead click flash button, click START..button !

..like i said ..

enjoy
sm4rtboy

damabib · 02-25-2007, 06:06

need 2 get some secret dataa b4 flash bb5

DjSwift · 02-26-2007, 14:24

Quote:

Originally Posted by XisiX

UFS/HWK Team:

1. Saras. The programmer. Don't expect from him to waiste his time answering to (so many) questions.
2. Odia The Ultimate. Supporter. He is here doing his best trying to help, but he is only one person; he can't read&answer to all of us.
3. .... Ops, sorry, seems like there is no one further in the list at the moment.

You got a picture?

Well im pretty sure he should have more supporters and product would be more sucessful

The key to sucess is providing support for your customers.. not leaving them in the mist.

DJ

cell2cell · 04-08-2008, 09:07

l think what you need is a more of step by step advice guide in the support area which will state that if your hwk gives you report like
CMT 1ST Boot Err: Bad Resp RAPx, the problem could be this. a,b,c,d .that way customers can reffer back and with hundreads of us soliving different problems daily and feeding back it would only take some months before you have a powerfull date bass l can assue you there could be 100s of reasons why you would get that reading from hwk be it the box the cable the phone the computer and even you.

invite · 04-08-2008, 09:15

bro its not hwk or your box problem.its 100% cable problem bro.......

outlandier · 04-13-2008, 20:13

100% cable problem bro

cell2cell · 04-17-2008, 12:03

l use the cable to flash other phones and it works fine its only on three phones that l have this problem. so how can it be the cable, are yo saying a cable can be fulty for one phone and ok for another.

01-15-2007, 21:35	#1 (permalink)
DjSwift Freak Poster Join Date: Jul 2001 Location: London/ Slovenia/ Mauritius Posts: 328 Member: 5360 Status: Offline Sonork: 1577169 Thanks Meter: 24	Flashing a 6280 CMT 1st Boot Err: Bad Resp RAPx, I did try search and i tried what everyone did I even reinstalled v.3.0 etc and re installed all! I get this CMT 1st Boot Err: Bad Resp RAPx, Process Failed, Repowering Mobile WHy ?? What is it ? Surely not a cable problem because i got a brand new cable!! I tried ticking unticking vpp and using vpp cable I CAN get the phone in local/test mode which isnt a problem. It even reads the phone and shows me the sw version etc.. But when it comes to flash it CMT 1st Boot Err: Bad Resp RAPx, Process Failed, Repowering Mobile Please help me as i noticed that my sara box hasnt been able to serve me for 2 month now as i tend to use other solutions. But i paid good money for this and i beleive it should work!!! So anyone please help me out. DJ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6300 CMT 1ST Boot Err: Bad Resp RAPx help!	KARABO	Nokia Hardware & Hardware Repair	6	09-13-2016 15:04
CMT 1ST Boot Err: Bad Resp RAPx	alharbi	HWK	6	10-02-2009 15:28
Help!CMT 1st Boot Err: Bad Resp RAPx	rainstop	HWK	6	09-02-2009 05:19
CMT 1ST Boot Err: Bad Resp RAPx	alharbi	UFS2 + UFS3-Tornadoflasher	0	10-27-2008 00:39
Help!CMT 1st Boot Err: Bad Resp RAPx	rainstop	Nokia Hardware & Hardware Repair	2	09-01-2006 21:47

01-16-2007, 21:26	#2 (permalink)
DjSwift Freak Poster Join Date: Jul 2001 Location: London/ Slovenia/ Mauritius Posts: 328 Member: 5360 Status: Offline Sonork: 1577169 Thanks Meter: 24	ok I hardly ask for help here. I am a loyal HWK customer for quite some time and My stuff is only original What do I have to do to get some answers here? Any help advised? I paid around £200 for these things and never suceeded in flashing BB5. So a little light my way would help and I direct this towards the product supporters for HWK!. If there is any information you need please let me know. As right now I beleive i could have invested into something else where I would actually get some kind of support DJ

01-17-2007, 00:15	#3 (permalink)
SpoOnx Registered User Join Date: Mar 2006 Location: Portugal Age: 41 Posts: 361 Member: 246072 Status: Offline Thanks Meter: 96	that´s hardware problem with your phone not with your box, try to rehoot Rapx and flash it again

01-18-2007, 06:33	#4 (permalink)
::Yasir:: No Life Poster Join Date: Dec 2003 Age: 36 Posts: 891 Member: 47281 Status: Offline Thanks Meter: 17	Nope. I have a new 6280 and the same prob!!! Now are u going to tell me that problem is with my phone?? Irrelevant!! HWK fails @ flashing BB5. Yes it is a useful tool based on multi platform but it's not good @ flashing bb5

01-18-2007, 08:58	#5 (permalink)
DjSwift Freak Poster Join Date: Jul 2001 Location: London/ Slovenia/ Mauritius Posts: 328 Member: 5360 Status: Offline Sonork: 1577169 Thanks Meter: 24	Lol you always get someone to say re hot the phone blah blah thats utter BS THERE IS NO PROBLEM WITH THE PHONE COZ I SUCESSFULLY FLASHED IT TO 5.92 WITH PHOENIX!!!! Had it started flashing in hwk and failed, then i might route it down to hardware issues with the handset @Spoonx.. thats crap advice No offense Anyways, i hope HWK sort themselves out since im going to invest in other things now I thought that i might get some kind of help from the actual people who support the product oBviously not I know not to waste my valuable money now DJ

02-19-2007, 13:48	#7 (permalink)
harisha g h Freak Poster Join Date: Aug 2005 Age: 39 Posts: 314 Member: 170684 Status: Offline Thanks Meter: 19	I too have same complent with 6681, my cable is 100% working is it hardware or software plz reply hwk teem thanks in advance. CMT 1st Boot Err: Bad Resp RAPx, Process Failed, Repowering Mobile

02-19-2007, 14:06	#8 (permalink)
matrix05300 No Life Poster Join Date: Jan 2004 Location: Algeria Posts: 815 Member: 49494 Status: Offline Thanks Meter: 40	for sure it's a cable problem, or maybe HWK i flash BB5 phone without any problem for some model (like 6630) i use VPP generator, for others (N80) direct cable check your cable resistors WBR

02-25-2007, 05:44	#9 (permalink)
SM4RTBOY No Life Poster Join Date: Nov 2004 Posts: 2,064 Member: 92326 Status: Offline Thanks Meter: 205	to solve your all probs you should think first what you want ! so my experience . istead click flash button, click START..button ! ..like i said .. enjoy sm4rtboy

02-25-2007, 06:06	#10 (permalink)
damabib No Life Poster Join Date: Jan 2005 Location: EVERYWHERE U GO Age: 46 Posts: 4,800 Member: 106026 Status: Offline Sonork: 100.77890 Thanks Meter: 127	need 2 get some secret dataa b4 flash bb5

04-08-2008, 09:07	#12 (permalink)
cell2cell Freak Poster Join Date: Jun 2006 Posts: 264 Member: 299902 Status: Offline Thanks Meter: 20	l think what you need is a more of step by step advice guide in the support area which will state that if your hwk gives you report like CMT 1ST Boot Err: Bad Resp RAPx, the problem could be this. a,b,c,d .that way customers can reffer back and with hundreads of us soliving different problems daily and feeding back it would only take some months before you have a powerfull date bass l can assue you there could be 100s of reasons why you would get that reading from hwk be it the box the cable the phone the computer and even you.

04-08-2008, 09:15	#13 (permalink)
invite No Life Poster Join Date: Feb 2008 Location: inside Octupos Posts: 466 Member: 694734 Status: Offline Sonork: 100.1576699 Thanks Meter: 148	bro its not hwk or your box problem.its 100% cable problem bro.......

04-13-2008, 20:13	#14 (permalink)
outlandier Freak Poster Join Date: Jun 2007 Location: Out Of ... Posts: 205 Member: 528781 Status: Offline Thanks Meter: 33	100% cable problem bro

04-17-2008, 12:03	#15 (permalink)
cell2cell Freak Poster Join Date: Jun 2006 Posts: 264 Member: 299902 Status: Offline Thanks Meter: 20	l use the cable to flash other phones and it works fine its only on three phones that l have this problem. so how can it be the cable, are yo saying a cable can be fulty for one phone and ok for another.