HELP 6233. Can't remove user code. - GSM-Forum

JC_BY · 10-01-2006, 19:37

1st BOOT : C0,07 [Rm-145]
RAPx ID : 000000010000022600010006010C192101003000
EM 1 ID : 00000232
EM 2 ID : 00000352
RAPx PBID : 1B90021065BF0054AED81DEDE6FB6BD2D87C5C88
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 273F6D55DFAAF68F
CMT 1st Boot Ok
CMT 2nd Bt: RAP3Gv3_2nd.fg, Ver: 1.14.7
CMT FLID0 : 0001002F-00000121, Amd 29NS256N
CMT FLCNT : 000000000000000000000000000000000000
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT Alg Boot OK
Using External VPP
Erase Area: CMT 0x00000000-000006BF
Erase Area: CMT 0x000006C0-0000FFFF
Erase Area: CMT 0x00010000-0007FFFF
Erase Area: CMT 0x000A0000-0021FFFF
Erase Area: CMT 0x00220000-011DDFFF
Erase Area: CMT 0x011DE000-011DEFFF
Erase Area: CMT 0x011DF000-011DFFFF
CMT FLASH ERASE OK, Time: 1:17
CMT FLASH WRITE OK, Time: 1:43
1st BOOT : C0,07 [Rm-145]
RAPx ID : 000000010000022600010006010C192101003000
EM 1 ID : 00000232
EM 2 ID : 00000352
RAPx PBID : 1B90021065BF0054AED81DEDE6FB6BD2D87C5C88
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 273F6D55DFAAF68F
CMT 1st Boot Ok
CMT 2nd Bt: RAP3Gv3_2nd.fg, Ver: 1.14.7
CMT FLID0 : 0001002F-00000121, Amd 29NS256N
CMT FLCNT : 000000000000000000000000000000000000
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT Alg Boot OK
Chip SECTOR_SIZE: 128k
Warning, Must be Used 128Kb Sector_Size CNT File
128K Image Saved as: rm123_145_30004.52.image_e_128
Using External VPP
Erase Area: CMT 0x016E0000-01E7FFFF
Erase Area: CMT 0x01E80000-01FDFFFF
CNT FLASH ERASE OK, Time: 0:47
CNT FLASH WRITE OK, Time: 0:13
1st BOOT : C0,07 [Rm-145]
RAPx ID : 000000010000022600010006010C192101003000
EM 1 ID : 00000232
EM 2 ID : 00000352
RAPx PBID : 1B90021065BF0054AED81DEDE6FB6BD2D87C5C88
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 273F6D55DFAAF68F
CMT 1st Boot Ok
CMT 2nd Bt: RAP3Gv3_2nd.fg, Ver: 1.14.7
CMT FLID0 : 0001002F-00000121, Amd 29NS256N
CMT FLCNT : 000000000000000000000000000000000000
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT Alg Boot OK
Using External VPP
Erase Area: CMT 0x011E0000-016DFFFF
PPM FLASH ERASE OK, Time: 0:21
PPM FLASH WRITE OK, Time: 0:25
Flashing Completed, Rebooting Mobile
Set Full Factory Defaults Failed

I full flashed the phone but user code is remaining active. It asks for enter user code when I start the phone without sim card. And I can't connect the phone via DKU-2 - nothing happend when i plugged the cable into the phone.

JC_BY · 10-01-2006, 20:40

Resolved problem by replacing 3.3k resistor to 5.1k in BSI line. The phone can go into test mode and I was happy to Set Full Factory Defaults. User code was removed.

hamzaa · 10-02-2006, 08:41

did you change the resistor on the cable???

.:GSM International:. · 10-02-2006, 10:43

Quote:

Originally Posted by hamzaa

did you change the resistor on the cable???

No. The one behind his ear!

hamzaa · 10-03-2006, 08:33

@gsm international
if you dont have anything constructive to say,please shut up.
i have noticed on many threads that you are always behaving stupidly.

mike67 · 12-04-2006, 18:33

Hey Hamza .. did u manage to make full factory and if so how did u do it ,,please help as i am going thru the same problem

thanks
Mike

hamzaa · 12-07-2006, 10:17

yes i have solved the problem
open up the cable and the middle pin that makes contact to the battery pins thats the secret.if theres a component there remove it and replace with 3.3k resistor to 5.1k.this will solve the problem.dont worry about connecting external battery.

Formingus · 07-07-2007, 19:05

Wich Cable To Use For Reset User Rcode

ryaz1993. · 07-07-2007, 20:11

if u have 6233 cable thats good

else you can use 6280 cable but u need to remove the cover near the camera depending your cable type

by

Formingus · 07-08-2007, 07:54

I USE 6233 CABLE
just click on external VPP and lock will be removed
ELSE GIVE ME UI SETTINGS FAILED

HAROON's · 07-08-2007, 08:00

yes always modified cabel works perfect for iu setting and user code

best of luck
&
Best Regards

GSMCrazy1

nasro_nd · 07-17-2007, 11:25

phone in test mode ok without modification because i have a orginal cable for jaf
but UI Defaults Failed

help plz

Rayzx · 07-18-2007, 06:26

Quote:

phone in test mode ok without modification because i have a orginal cable for jaf
but UI Defaults Failed

help plz

That Should be Cable Problem , Please Check your cable .

Naeem123e · 07-12-2011, 11:03

JAF version 1.98.62
Detected PKEY: 0045A11C
Card life counter: 99.99%
P-key nokia module version 01.02
Detected UFS_USB V2.8 (c) SarasSoft 2007. version: 01.B1, Driver version: 0, Library version: 0
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.36.0
Changing mode...Done!
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101003000
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 0A000105CECD4F5087A4FCC0D54DAFC5C251CF17
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\UFS\rap3gv3_2nd.fg
Loader version: 01.10.02 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
Error in sending reading cmd...
Error in cmt get id...
Error loading cmt loader...
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101003000
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 0A000105CECD4F5087A4FCC0D54DAFC5C251CF17
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 273F6D55DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\UFS\rap3gv3_2nd.fg
Loader version: 01.10.02 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 220800EC <=> SAMSUNG (SEC) -> K8F5615ETM/K5G5629ATD
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\UFS\RAP3Gv3_algo_fps8.fg
Loader version: 01.0C.05 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Done!
Restarting phone...Done!
Reading SW version...05.60
Done!
Reading SW version...05.60
Done!
Total time: 0 Minutes, 0 Seconds
DCT4/BB5 counter: 0
After flash processing...
Waiting for phone to boot...
Reading...
Phone type: RM-145, Software version: 05.60
IMEI: 352744011738363
APE Ver: (null)
Variant Ver: (null)
Product Code: 0535976
Setting FULL FACTORY......Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 2 seconds...
Done!
Done!
Done!

10-01-2006, 19:37	#1 (permalink)
JC_BY No Life Poster Join Date: Mar 2004 Location: BELARUS, Minsk Age: 44 Posts: 1,178 Member: 59319 Status: Offline Sonork: 100.1606948 Thanks Meter: 82	HELP 6233. Can't remove user code. 1st BOOT : C0,07 [Rm-145] RAPx ID : 000000010000022600010006010C192101003000 EM 1 ID : 00000232 EM 2 ID : 00000352 RAPx PBID : 1B90021065BF0054AED81DEDE6FB6BD2D87C5C88 RAPx MODE : 00 RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 RAPx ROID : 273F6D55DFAAF68F CMT 1st Boot Ok CMT 2nd Bt: RAP3Gv3_2nd.fg, Ver: 1.14.7 CMT FLID0 : 0001002F-00000121, Amd 29NS256N CMT FLCNT : 000000000000000000000000000000000000 CMT 2nd Boot OK CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5 CMT Alg Boot OK Using External VPP Erase Area: CMT 0x00000000-000006BF Erase Area: CMT 0x000006C0-0000FFFF Erase Area: CMT 0x00010000-0007FFFF Erase Area: CMT 0x000A0000-0021FFFF Erase Area: CMT 0x00220000-011DDFFF Erase Area: CMT 0x011DE000-011DEFFF Erase Area: CMT 0x011DF000-011DFFFF CMT FLASH ERASE OK, Time: 1:17 CMT FLASH WRITE OK, Time: 1:43 1st BOOT : C0,07 [Rm-145] RAPx ID : 000000010000022600010006010C192101003000 EM 1 ID : 00000232 EM 2 ID : 00000352 RAPx PBID : 1B90021065BF0054AED81DEDE6FB6BD2D87C5C88 RAPx MODE : 00 RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 RAPx ROID : 273F6D55DFAAF68F CMT 1st Boot Ok CMT 2nd Bt: RAP3Gv3_2nd.fg, Ver: 1.14.7 CMT FLID0 : 0001002F-00000121, Amd 29NS256N CMT FLCNT : 000000000000000000000000000000000000 CMT 2nd Boot OK CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5 CMT Alg Boot OK Chip SECTOR_SIZE: 128k Warning, Must be Used 128Kb Sector_Size CNT File 128K Image Saved as: rm123_145_30004.52.image_e_128 Using External VPP Erase Area: CMT 0x016E0000-01E7FFFF Erase Area: CMT 0x01E80000-01FDFFFF CNT FLASH ERASE OK, Time: 0:47 CNT FLASH WRITE OK, Time: 0:13 1st BOOT : C0,07 [Rm-145] RAPx ID : 000000010000022600010006010C192101003000 EM 1 ID : 00000232 EM 2 ID : 00000352 RAPx PBID : 1B90021065BF0054AED81DEDE6FB6BD2D87C5C88 RAPx MODE : 00 RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1 RAPx ROID : 273F6D55DFAAF68F CMT 1st Boot Ok CMT 2nd Bt: RAP3Gv3_2nd.fg, Ver: 1.14.7 CMT FLID0 : 0001002F-00000121, Amd 29NS256N CMT FLCNT : 000000000000000000000000000000000000 CMT 2nd Boot OK CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5 CMT Alg Boot OK Using External VPP Erase Area: CMT 0x011E0000-016DFFFF PPM FLASH ERASE OK, Time: 0:21 PPM FLASH WRITE OK, Time: 0:25 Flashing Completed, Rebooting Mobile Set Full Factory Defaults Failed I full flashed the phone but user code is remaining active. It asks for enter user code when I start the phone without sim card. And I can't connect the phone via DKU-2 - nothing happend when i plugged the cable into the phone.

07-12-2011, 11:03	#14 (permalink)
Naeem123e Registered User Join Date: Sep 2008 Location: HardWare+Software & Unlocking Posts: 2,026 Member: 865598 Status: Offline Sonork: 100.1609492 Thanks Meter: 465	6233 user code reset UI seting ok JAF version 1.98.62 Detected PKEY: 0045A11C Card life counter: 99.99% P-key nokia module version 01.02 Detected UFS_USB V2.8 (c) SarasSoft 2007. version: 01.B1, Driver version: 0, Library version: 0 JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\ JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\ JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\ JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\ USB Cable Driver version: 7.1.36.0 Changing mode...Done! Booting phone... CMT Boot Data: Asic ID: 000000010000022600010006010C192101003000 Asic Mode ID: 00 Asic EM ID: 00000353 Asic Public ID: 0A000105CECD4F5087A4FCC0D54DAFC5C251CF17 HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000 ROM ID: 273F6D55DFAAF68F CMT Boot File: C:\Program Files\ODEON\JAF\Flash\UFS\rap3gv3_2nd.fg Loader version: 01.10.02 -> Revision: 0000 Patching CMT boot step1... Patching CMT boot step2... Patching CMT boot step3... CMT Boot Ready Error in sending reading cmd... Error in cmt get id... Error loading cmt loader... Booting phone... CMT Boot Data: Asic ID: 000000010000022600010006010C192101003000 Asic Mode ID: 00 Asic EM ID: 00000353 Asic Public ID: 0A000105CECD4F5087A4FCC0D54DAFC5C251CF17 HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000 ROM ID: 273F6D55DFAAF68F CMT Boot File: C:\Program Files\ODEON\JAF\Flash\UFS\rap3gv3_2nd.fg Loader version: 01.10.02 -> Revision: 0000 Patching CMT boot step1... Patching CMT boot step2... Patching CMT boot step3... CMT Boot Ready CMT Flash ID: 220800EC <=> SAMSUNG (SEC) -> K8F5615ETM/K5G5629ATD CMT Flash Data: 00000000000000000000000000000000 CMT Loader: C:\Program Files\ODEON\JAF\Flash\UFS\RAP3Gv3_algo_fps8.fg Loader version: 01.0C.05 -> Revision: 0000 Patching CMT loader step1... Patching CMT loader step3... CMT Loader Ready Done! Restarting phone...Done! Reading SW version...05.60 Done! Reading SW version...05.60 Done! Total time: 0 Minutes, 0 Seconds DCT4/BB5 counter: 0 After flash processing... Waiting for phone to boot... Reading... Phone type: RM-145, Software version: 05.60 IMEI: 352744011738363 APE Ver: (null) Variant Ver: (null) Product Code: 0535976 Setting FULL FACTORY......Setting test mode... Setting FULL FACTORY... Operation took 0 minutes 2 seconds... Done! Done! Done!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
anyone can help me to remove user code for m341	div_859	Multi-Box	7	01-26-2010 17:35
i can't remove user code	ponix	UST Pro II	2	01-23-2010 13:30
anyone can help mo to remove user code for samsung s5600	div_859	NSPRO	1	10-13-2009 14:19
f490v can't be connected to remove user code and to unlock	hightechsquare	Easy-Unlocker	0	10-09-2008 14:12
help to remove user code of smartphone 1	tsarkh	HTC & PDA WM( With Touchscreen)	2	10-17-2006 16:28

10-01-2006, 20:40	#2 (permalink)
JC_BY No Life Poster Join Date: Mar 2004 Location: BELARUS, Minsk Age: 44 Posts: 1,178 Member: 59319 Status: Offline Sonork: 100.1606948 Thanks Meter: 82	Resolved problem by replacing 3.3k resistor to 5.1k in BSI line. The phone can go into test mode and I was happy to Set Full Factory Defaults. User code was removed.

10-02-2006, 08:41	#3 (permalink)
hamzaa Freak Poster Join Date: Oct 2004 Age: 42 Posts: 487 Member: 84694 Status: Offline Thanks Meter: 9	did you change the resistor on the cable???

10-03-2006, 08:33	#5 (permalink)
hamzaa Freak Poster Join Date: Oct 2004 Age: 42 Posts: 487 Member: 84694 Status: Offline Thanks Meter: 9	@gsm international if you dont have anything constructive to say,please shut up. i have noticed on many threads that you are always behaving stupidly.

12-04-2006, 18:33	#6 (permalink)
mike67 No Life Poster Join Date: Nov 2005 Location: USA Posts: 1,163 Member: 197538 Status: Offline Thanks Meter: 97	Hey Hamza .. did u manage to make full factory and if so how did u do it ,,please help as i am going thru the same problem thanks Mike

12-07-2006, 10:17	#7 (permalink)
hamzaa Freak Poster Join Date: Oct 2004 Age: 42 Posts: 487 Member: 84694 Status: Offline Thanks Meter: 9	yes i have solved the problem open up the cable and the middle pin that makes contact to the battery pins thats the secret.if theres a component there remove it and replace with 3.3k resistor to 5.1k.this will solve the problem.dont worry about connecting external battery.

07-07-2007, 19:05	#8 (permalink)
Formingus Banned Join Date: Jul 2006 Location: dword ptr [ebp-1C], edx Posts: 4,626 Member: 322417 Status: Offline Thanks Meter: 940	Wich Cable To Use For Reset User Rcode

07-07-2007, 20:11	#9 (permalink)
ryaz1993. No Life Poster Join Date: Jan 2006 Location: gsm market Age: 35 Posts: 701 Member: 222481 Status: Offline Thanks Meter: 30	if u have 6233 cable thats good else you can use 6280 cable but u need to remove the cover near the camera depending your cable type by

07-08-2007, 07:54	#10 (permalink)
Formingus Banned Join Date: Jul 2006 Location: dword ptr [ebp-1C], edx Posts: 4,626 Member: 322417 Status: Offline Thanks Meter: 940	I USE 6233 CABLE just click on external VPP and lock will be removed ELSE GIVE ME UI SETTINGS FAILED

07-08-2007, 08:00	#11 (permalink)
HAROON's No Life Poster Join Date: Dec 2004 Location: Manama / BAHRAIN Posts: 1,665 Member: 100592 Status: Offline Sonork: 1578498 Thanks Meter: 245	yes always modified cabel works perfect for iu setting and user code best of luck & *Best Regards* GSMCrazy1

07-17-2007, 11:25	#12 (permalink)
nasro_nd No Life Poster Join Date: May 2005 Location: CANADA Age: 42 Posts: 1,457 Member: 149415 Status: Offline Sonork: 100.1609895 Thanks Meter: 77	phone in test mode ok without modification because i have a orginal cable for jaf but UI Defaults Failed help plz