Help with Samsung E200 - GSM-Forum

pedtros · 07-24-2007, 16:22

I was flashing a samsung E200 and in the middle of flashing i had a blackout and my PC went off. I repair the blackout and i have tryied to reflash the E200 but now i get the message "first boot failed"....

Now i can't reflash the phone. Can anyone give an idea please???
The phone is dead. I only get a white screen when i press the on button for a few seconds and nothing more....

**Odia The Ultimate** · 07-25-2007, 03:23

Quote:

Originally Posted by pedtros

I was flashing a samsung E200 and in the middle of flashing i had a blackout and my PC went off. I repair the blackout and i have tryied to reflash the E200 but now i get the message "first boot failed"....

Now i can't reflash the phone. Can anyone give an idea please???
The phone is dead. I only get a white screen when i press the on button for a few seconds and nothing more....

Flash without battery and when the software attempts to upload first loader, short the 3 battery contacts with a screwdriver for a second, if this does not help try again but for a little longer.

Odia.

pedtros · 07-26-2007, 13:40

Thank you very much my friend...
It worked just fine !!!

Thanks again !!!

**Odia The Ultimate** · 07-27-2007, 07:14

Quote:

Originally Posted by pedtros

Thank you very much my friend...
It worked just fine !!!

Thanks again !!!

Is cool trick yes?

Dont forget this, for Swift is very useful when you have this problem

Odia.

pedtros · 07-27-2007, 17:00

Thanks again my friend.

pedtros · 07-27-2007, 17:04

OK. I will try to remember it.

Thanks again my friend.

bisib · 07-27-2007, 21:08

help after flashing samsung e200
now phone start with strange numbers 18000002 selected brand was e250
please help with solution thanks

ramoon20 · 08-13-2007, 22:13

Quote:

Originally Posted by Odia The Ultimate

Is cool trick yes?

Dont forget this, for Swift is very useful when you have this problem

Odia.

*********************************************
Hi ser

can you expline to us how do you flash samsung E200 with hwk pls

my phone was dead by bleutooth i send a photo to phone and phone dead

pls help us to slove this matter

regards

**Odia The Ultimate** · 08-14-2007, 05:57

Quote:

Originally Posted by ramoon20

*********************************************
Hi ser

can you expline to us how do you flash samsung E200 with hwk pls

my phone was dead by bleutooth i send a photo to phone and phone dead

pls help us to slove this matter

regards

Use D800 cable
Select Swift/E200
Select MCU
Select TFS
Press Write Flash

Nothing special is needed.

Odia.

ramoon20 · 08-14-2007, 12:38

thanks alot for quick reply ser.

but I have not e200 model in my ufs3

but i have e250 cable not usb rg45 one and also i have cable usb of e200
witch came with it original one

enjoy

**Odia The Ultimate** · 08-14-2007, 13:56

Quote:

Originally Posted by ramoon20

thanks alot for quick reply ser.

but I have not e200 model in my ufs3

but i have e250 cable not usb rg45 one and also i have cable usb of e200
witch came with it original one

enjoy

If you do not have E200 in the model list then your not using the latest version, since E200 was added last release, also you cannot flash with the USB cable you need to have the RJ45 cable for the UFS interface.

Odia.

ramoon20 · 08-14-2007, 17:25

Thanka Ser For Your Second Reply
I Have Cable Rj45 For E250 Can I Use It For E200

Enjoy

**Odia The Ultimate** · 08-15-2007, 11:21

Quote:

Originally Posted by ramoon20

Thanka Ser For Your Second Reply
I Have Cable Rj45 For E250 Can I Use It For E200

Enjoy

The SAMs software tells you which cable to use, why not select E250 and check which cable is required, you can then check E200 and see what is cable name, if they are the same name, then the cable is the same, if not, then the cable is different.

Odia.

jawad8305 · 08-16-2007, 00:14

Quote:

Originally Posted by Odia The Ultimate

Is cool trick yes?

Dont forget this, for Swift is very useful when you have this problem

Odia.

YES very cool trick !! thanks

gsmsikar · 04-11-2008, 17:55

i tried this trick on my x540 but it did not work ...

i only get this messege ,,,,

what to do ?

MCU File: x540xegb3.cla CheckSum: 41F037C4
TFS File: x540xegb3.tfs CheckSum: 026A26D8
CFG File: x540xegb3.cfg 2467 byte(s)
1st Boot Failed: Power-Up

please help ..

07-24-2007, 16:22	#1 (permalink)
pedtros Junior Member Join Date: Dec 2004 Age: 34 Posts: 12 Member: 101135 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Help with Samsung E200 I was flashing a samsung E200 and in the middle of flashing i had a blackout and my PC went off. I repair the blackout and i have tryied to reflash the E200 but now i get the message "first boot failed".... Now i can't reflash the phone. Can anyone give an idea please??? The phone is dead. I only get a white screen when i press the on button for a few seconds and nothing more....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-26-2007, 13:40	#3 (permalink)
pedtros Junior Member Join Date: Dec 2004 Age: 34 Posts: 12 Member: 101135 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Thank you very much my friend... It worked just fine !!! Thanks again !!!

07-27-2007, 17:00	#5 (permalink)
pedtros Junior Member Join Date: Dec 2004 Age: 34 Posts: 12 Member: 101135 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Thanks again my friend.

07-27-2007, 17:04	#6 (permalink)
pedtros Junior Member Join Date: Dec 2004 Age: 34 Posts: 12 Member: 101135 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	OK. I will try to remember it. Thanks again my friend.

07-27-2007, 21:08	#7 (permalink)
bisib Junior Member Join Date: Oct 2006 Posts: 1 Member: 382027 Status: Online Thanks: 3 Thanked 0 Times in 0 Posts	help after flashing samsung e200 now phone start with strange numbers 18000002 selected brand was e250 please help with solution thanks

08-14-2007, 12:38	#10 (permalink)
ramoon20 Freak Poster Join Date: Sep 2004 Location: western sahara Age: 26 Posts: 426 Member: 80599 Status: Online Thanks: 17 Thanked 41 Times in 27 Posts	thanks alot for quick reply ser. but I have not e200 model in my ufs3 but i have e250 cable not usb rg45 one and also i have cable usb of e200 witch came with it original one enjoy

08-14-2007, 17:25	#12 (permalink)
ramoon20 Freak Poster Join Date: Sep 2004 Location: western sahara Age: 26 Posts: 426 Member: 80599 Status: Online Thanks: 17 Thanked 41 Times in 27 Posts	Thanka Ser For Your Second Reply I Have Cable Rj45 For E250 Can I Use It For E200 Enjoy

04-11-2008, 17:55	#15 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 3,091 Member: 28004 Status: Online Thanks: 303 Thanked 409 Times in 195 Posts	i tried this trick on my x540 but it did not work ... i only get this messege ,,,, what to do ? MCU File: x540xegb3.cla CheckSum: 41F037C4 TFS File: x540xegb3.tfs CheckSum: 026A26D8 CFG File: x540xegb3.cfg 2467 byte(s) 1st Boot Failed: Power-Up please help ..