How to make Samsung QUALCOMM RAM DUMP - Page 3 - GSM-Forum

wee2000 · 05-24-2009, 12:14

All readings are done with a test card inserted. Its sim locked, shall i use test card or any operator sim?

GsmMunna · 05-24-2009, 13:34

Quote:

Originally Posted by wee2000

All readings are done with a test card inserted. Its sim locked, shall i use test card or any operator sim?

NOT TEST !
Any Operator

Munna.

wee2000 · 05-25-2009, 02:08

here is the result with a different sim inserted :

- phone display incorrect SIM, network lock
- when i press *#quausb#, it won't show me the qualcomm mode. On display, its just showing the *#782872 that i pressed (# not displayed), not like the qualcomm mode with confirm option on the left softkey
- though, the reads was successful without errors

Start: 0000 0000
Size: 0400 0000

http://www.sendspace.com/file/uapz1n

GsmMunna · 05-25-2009, 11:06

Quote:

Originally Posted by wee2000

here is the result with a different sim inserted :

- phone display incorrect SIM, network lock
- when i press *#quausb#, it won't show me the qualcomm mode. On display, its just showing the *#782872 that i pressed (# not displayed), not like the qualcomm mode with confirm option on the left softkey
- though, the reads was successful without errors

Start: 0000 0000
Size: 0400 0000

http://www.sendspace.com/file/uapz1n

Here is your Unlock Code:

FLAG: 00000001
MAST: 38603193 [UNFREEZE]
NET : 13649413 [#SIMLOCK*NET*13649413#] <- Locked
SUB : 00000000 [#SIMLOCK*SUB*00000000#]
SP : 00000000 [#SIMLOCK*SP*00000000#]
CP : 00000000 [#SIMLOCK*CP*00000000#]
SIM : 12369874 [#SIMLOCK*SIM*12369874#]
MUL : 12369874 [#SIMLOCK*MUL*12369874#]

thanks For your Support.!

Munna.

wee2000 · 05-25-2009, 11:11

Sorry, may i know how to key in these codes?

Munna, i'm the one who should say thanks a million.

GsmMunna · 05-25-2009, 11:32

Quote:

Originally Posted by wee2000

Sorry, may i know how to key in these codes?

Munna, i'm the one who should say thanks a million.

#7465625*638*13649413#
or
13649413

if phone ask

Munna.

wee2000 · 05-25-2009, 11:49

Phone unlocked successfully (i jus keyed in the code 13649413 n press "confirm"). Thanks to HWK n product supporter Munna!

bonusphone · 05-25-2009, 17:49

I need for Z230 too.
Here the link for the dump
http://www.sendspace.com/file/8x435z
Thanks

GsmMunna · 05-25-2009, 19:00

Quote:

Originally Posted by bonusphone

I need for Z230 too.
Here the link for the dump
http://www.sendspace.com/file/8x435z
Thanks

Your Dump is Ok
You Also Need to read this area:
Start: 0C00 0000
Size: 0200 0000
With inserted sim card (Any Provider)

Munna.

bonusphone · 05-25-2009, 19:05

Is necessary read another dump?

GsmMunna · 05-25-2009, 19:09

Quote:

Originally Posted by bonusphone

Is necessary read another dump?

Yes and also provide Screendump of qcdi info...!!

Munna.

bonusphone · 05-25-2009, 23:13

Just another dump, like you said.

http://www.turboupload.com/os8p8u1dn...0_bin.rar.html

The screendump:

PING: OK, COM38 - QCDI
Software: Z230BBFG7_FI2
Regions : TMN - Portugal
Language: de,en,es,fr,it,nl,pt,ru
Release : 2006 July Rev: 7
Hardware: MP 2.102
IMEI: 352069-01-272979-3
BTID: 0018:AF:3D8073
S/N : R7VAA58264
MOB_INFO not Avalaible
Sysinfo not Exists
Currently Unsupported Model
Unsupported Firmware or SIM not Inserted

The phone says Freeze, i need the unfreeze code and unlock code.
Thanks.

GsmMunna · 05-26-2009, 04:06

Quote:

Originally Posted by bonusphone

Just another dump, like you said.

http://www.turboupload.com/os8p8u1dn...0_bin.rar.html

The screendump:

PING: OK, COM38 - QCDI
Software: Z230BBFG7_FI2
Regions : TMN - Portugal
Language: de,en,es,fr,it,nl,pt,ru
Release : 2006 July Rev: 7
Hardware: MP 2.102
IMEI: 352069-01-272979-3
BTID: 0018:AF:3D8073
S/N : R7VAA58264
MOB_INFO not Avalaible
Sysinfo not Exists
Currently Unsupported Model
Unsupported Firmware or SIM not Inserted

The phone says Freeze, i need the unfreeze code and unlock code.
Thanks.

Here Is Your Code:

FLAG: 00000001 [Freezed!]
MAST: 40472407 [UNFREEZE]
NET : 15814828 [#SIMLOCK*NET*15814828#]

Munna.

bonusphone · 05-26-2009, 08:56

Thanks. Works again.

ChelasGsm · 05-26-2009, 18:56

one more

PING: OK, COM35 - QCDI
Software: S7330MNHJ4_HL1
Regions : MN
Release : 2008 October Rev: 4
Hardware: MP 1.000
IMEI: 354522-
BTID: 0023

7:071BC4
S/N : R1XQC88623
PRID: GT-S7330
CSID: H3G
SWID: S7330MNHJ4_HL1
DATE: 2008-12-04
UNID: 60000000103883
FLID: K5D1G13DCA(S7330)
AXID: 1108-000159
Sysinfo Saved as:
S7330MNHJ4_HL1_354xxxxxxxxx_R1XQC88623_60000000103 883_5202B77E_Sys.sec
Currently Unsupported Model
Unsupported Firmware or SIM not Inserted

05-25-2009, 02:08	#33 (permalink)
wee2000 Freak Poster Join Date: Oct 2007 Posts: 162 Member: 614026 Status: Offline Thanks: 13 Thanked 21 Times in 14 Posts	here is the result with a different sim inserted : - phone display incorrect SIM, network lock - when i press #quausb#, it won't show me the qualcomm mode. On display, its just showing the #782872 that i pressed (# not displayed), not like the qualcomm mode with confirm option on the left softkey - though, the reads was successful without errors Start: 0000 0000 Size: 0400 0000 http://www.sendspace.com/file/uapz1n Last edited by GsmMunna; 05-25-2009 at 11:40.

05-25-2009, 11:11	#35 (permalink)
wee2000 Freak Poster Join Date: Oct 2007 Posts: 162 Member: 614026 Status: Offline Thanks: 13 Thanked 21 Times in 14 Posts	Sorry, may i know how to key in these codes? Munna, i'm the one who should say thanks a million. Last edited by wee2000; 05-25-2009 at 11:17.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
how to name samsung dump flash file	monti_908	Samsung Programs & Flashers	9	04-29-2011 08:03
How to make Nokia 8800 Flash Memory full dump	ryush96	HWK	2	03-20-2010 17:35
How to make Samsung a127 ?	URGENT_2008	Samsung Hardware-Repair Area	0	08-07-2008 13:31
how to make samsung clips	karamusa	VLSI, Conexant, Skyworks and Old Models	0	12-25-2002 13:22
how to make eprom dump..	timitiz	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	10-19-2000 22:47

05-24-2009, 12:14	#31 (permalink)
wee2000 Freak Poster Join Date: Oct 2007 Posts: 162 Member: 614026 Status: Offline Thanks: 13 Thanked 21 Times in 14 Posts	All readings are done with a test card inserted. Its sim locked, shall i use test card or any operator sim?

05-25-2009, 11:49	#37 (permalink)
wee2000 Freak Poster Join Date: Oct 2007 Posts: 162 Member: 614026 Status: Offline Thanks: 13 Thanked 21 Times in 14 Posts	Phone unlocked successfully (i jus keyed in the code 13649413 n press "confirm"). Thanks to HWK n product supporter Munna!

05-25-2009, 17:49	#38 (permalink)
bonusphone Insane Poster Join Date: Apr 2008 Posts: 64 Member: 749885 Status: Offline Thanks: 15 Thanked 1 Time in 1 Post	I need for Z230 too. Here the link for the dump http://www.sendspace.com/file/8x435z Thanks

05-25-2009, 19:05	#40 (permalink)
bonusphone Insane Poster Join Date: Apr 2008 Posts: 64 Member: 749885 Status: Offline Thanks: 15 Thanked 1 Time in 1 Post	Is necessary read another dump?

05-25-2009, 23:13	#42 (permalink)
bonusphone Insane Poster Join Date: Apr 2008 Posts: 64 Member: 749885 Status: Offline Thanks: 15 Thanked 1 Time in 1 Post	Just another dump, like you said. http://www.turboupload.com/os8p8u1dn...0_bin.rar.html The screendump: PING: OK, COM38 - QCDI Software: Z230BBFG7_FI2 Regions : TMN - Portugal Language: de,en,es,fr,it,nl,pt,ru Release : 2006 July Rev: 7 Hardware: MP 2.102 IMEI: 352069-01-272979-3 BTID: 0018:AF:3D8073 S/N : R7VAA58264 MOB_INFO not Avalaible Sysinfo not Exists Currently Unsupported Model Unsupported Firmware or SIM not Inserted The phone says Freeze, i need the unfreeze code and unlock code. Thanks.

05-26-2009, 08:56	#44 (permalink)
bonusphone Insane Poster Join Date: Apr 2008 Posts: 64 Member: 749885 Status: Offline Thanks: 15 Thanked 1 Time in 1 Post	Thanks. Works again.