HWK Release 08/06/2009 - Discussion

[Odia The Ultimate]

Release Date: 08/06/2009

The Official release is ready in our download area http://sarunasoftware.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.5
----------------------

1. New BB5 products: RM-412,RM-413,RM-443,RM-505,RM-506,RM-507,RM-570
(E75-1,E75-2,6303c,N97-1,N97-5,N97-3,6600i-1)
2. Introducing RAPU-YAMA ASIC: RM-368,RM-431,RM-432,RM-470
(6260s-1,5630d-1,5630d-1b,6700c-1) support added.
3. New DCT4+ products: RH-512,RH-513,RH-514,RH-515,RH524,RH-525,RH-543
(2330c-2,2330c-2b,2320c-2,2320c-2b,5030c-2,5030c-2b,2323c-2)
4. New DCT4+ UNL versions support:
RH-99 v5.91, RH-100 v5.80, RH-105 v5.91, RH-106 v5.80, RM-305 v5.91
(1200, 1200b, 1208, 1208b, 1650)
5. Certificates write error in DL mode fixed.
6. Check is ASIC supported by firmware for DCT4 and WD2 products.
7. Read UEM IMEI or ESN for DCT-4/WD2 ASIC 2,5,6,11 when Rd UEM.
8. Added backup of PM 120 block when make Bk.308 (if exists)
9. Added [Skip Erase] option for BB5 products (for Experts Use Only)
10.Added [1331] option, to switch on/off NU48Fxxx Intel Chips Solution.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG GSM V 2.0.8.5
-----------------

1. MTK KG195,KP199,KP220 support added.
2. PCS files support added for MTK models.
3. Cable type indicator.


SAMs V 2.0.8.5
---------------

TRIDENT
B100K,C140i added (DUNL,IM,FL)
TRIDENT VISION
C3010,C3050,C3060R,C3110,C3110C,S3500 added (CUNL,IM,FL)
M120,M128,E1040,S3030 added (DUNL,IM,FL)
B520 Vodafone support added.
(use B520B-V model, not mix with B520, filenames are similar)
(Use [Reset MMI] if phone ask for password without SIM)
New MSL bypass algo introduced (B220,..,C3050,E1410,S3500...)
allows direct codes reading, unlock and IMEI repair.
MSL Repair introduced, allows to repair or use alien E2P
(Repair of "User Fault on Illegal Trial !!" and restore IMEI)
OM(SYSOL)
C160G added (DUNL,IM,FL,SECT)
SWIFT
B2100,C5212,E250i,F265L,F270,J700i,M158,P250,U800E ,X576
added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B100i,B210 added (DUNL,IM,FL,SECT)
C270,E1100,E1120,E1125W,E1125-SEA,E1210M,E1210S,E1310B,
E1310M,E1310S,E1360B,E1360M,E2100,E2210 added (DUNL,IM,FL)
(Do not mix B-C-M-L-S-T-EUR-SEA models! More info on support)
B130S,B130T flashing fixed (blinking or frozen phone)
(Must select target firmware as model, e.g. model is B130 and
want to flash B130S, select B130S as the model.)
SWIFT-3G
P270 added (DUNL,FL,SECT,BT)
QUALCOMM
A777,M7600,M7603,M8800C,M8800L,S5600,S5603,S8300N added.
[Write E2P] (NVM) added.
UNLOCK and UNFREEZE added for these models: A411,A777,S7220,
S7330,S8300,S8300C,Z230 (Use [QCDI Info] button to read keys)
Old models UNLOCK and UNFREEZE: Z300,Z500,..,ZM60,..
(these are not in models list, select any model. Use
[Mobile Info] button to read keys & [Unlock] to direct unlock)


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk


Official SarasSoft Rapidshare Mirrors:-

http://rapidshare.com/users/VAY6Q3

[Odia The Ultimate]

Use Rapidshare mirror until support has been updated.

Please use this thread to discuss the latest release, not for thanks or about features/models not added.

Attached is some useful info on Agere Vision and a Nokia cable mod.

DCTxBB5 MD5: D4BFE61DEF52C700C909C58C887E21E5
LG_GSM MD5: 16B405B3C97C1C131D71BC452D43F34D
SAMs MD5: F5F5DFCAA5264439F40871A8D11DAE2A

Odia.

[quinzinho]

mr Odia, some time late told us that you had the solution to the release of BB5, but so far no update out! why you lied to us?

[Odia The Ultimate]

Originally Posted by quinzinho

mr Odia, some time late told us that you had the solution to the release of BB5, but so far no update out! why you lied to us?

BB5 unlock is free, more than 1 free solution is available, do you really think we are going to waste time adding it to UFS+HWK as a priority?

and if you cannot read and understand English, then its best not to post at all.

Odia.

[tandaganon]

3. New DCT4+ products: RH-512,RH-513,RH-514,RH-515,RH524,RH-525,RH-543
(2330c-2,2330c-2b,2320c-2,2320c-2b,5030c-2,5030c-2b,2323c-2)

i think that is RM-512, RM-513, RM-514, RM-515, RM-524, RM-525 and RM-543

[[Shadab_M]]

Odia Bro!

Here is the 1331 Option Tested. [1331] stands for 1.33.1 Flash Loader

http://forum.gsmhosting.com/vbb/show...03#post4542903

But I think it could be fixed by using Skip Erase option instead of old loaders.

Let me check.

Br,
Shadab Ahmad

[[Shadab_M]]

@Odia Bro!

I have just flashed a Nokia 3110c with Intel NU48F256 by Skip Erase option.

Here is the log:

1ST BOOT  : C0,07 [Rm-237] [2.0.8.5]
RAPx ID   : 000000010000022600010006010C192101001101
EM 1 ID   : 00000232
EM 2 ID   : 00000353
RAPx PBID : 0D30010A872B7E5625A62B645EF7CFDDEAFAAB5C
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT FLID0 : 00898981-00006A21, Int NU48F256
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO  : RAP3Gv3_algo.fg, Ver: 9.17.0
CMT KSIG0 : C0E691EA16A7593A9BB28832D7312A39F7ED668D
CMT VPP   : Internal
DUAL LINE : True
CMT ALG Boot OK
IMAGE : rm237__07.21.mcusw
ERASE Skipped
Written: 10 Certificate(s)
CMT FLASH WRITE OK, Time: 07:07
1ST BOOT  : C0,07 [Rm-237] [2.0.8.5]
RAPx ID   : 000000010000022600010006010C192101001101
EM 1 ID   : 00000232
EM 2 ID   : 00000353
RAPx PBID : 0D30010A872B7E5625A62B645EF7CFDDEAFAAB5C
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT FLID0 : 00898981-00006A21, Int NU48F256
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO  : RAP3Gv3_algo.fg, Ver: 9.17.0
CMT KSIG0 : C0E691EA16A7593A9BB28832D7312A39F7ED668D
CMT VPP   : Internal
DUAL LINE : True
CMT ALG Boot OK
Chip SECTOR_SIZE: 128k
Warning, Must be Used 128Kb Sector_Size CNT File
IMAGE : rm237__07.21.image_mr_128
ERASE Skipped
CNT FLASH WRITE OK, Time: 07:45
1ST BOOT  : C0,07 [Rm-237] [2.0.8.5]
RAPx ID   : 000000010000022600010006010C192101001101
EM 1 ID   : 00000232
EM 2 ID   : 00000353
RAPx PBID : 0D30010A872B7E5625A62B645EF7CFDDEAFAAB5C
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT FLID0 : 00898981-00006A21, Int NU48F256
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO  : RAP3Gv3_algo.fg, Ver: 9.17.0
CMT KSIG0 : C0E691EA16A7593A9BB28832D7312A39F7ED668D
CMT VPP   : Internal
DUAL LINE : True
CMT ALG Boot OK
IMAGE : rm237__07.21.ppm_mr
ERASE Skipped
PPM FLASH WRITE OK, Time: 08:19
Flashing Completed, Rebooting Mobile

We can flash these chips without using [1331] option as it does nothing but replaces loader with Older One [ Ver. 1.33.1 ].

So, If you put an extra option for these chips (as you have given as [1331]), better to only Skip Erasing while writing MCU file on these chips bcoz error occurs when writing MCU file only. Other files could be written without any problem. This option could be as Turn On Int NU48F256 Flashing or something like that.

Btw, thanks for adding Skip Erase option.

So, I think there will be no need to using older loaders anyway.

HWK Team better knows what to do and when to do!

All the best HWK Team!

Regards,
Shadab Ahmad

[[Shadab_M]]

Originally Posted by dodzkie

still cannot unlock 1202, not a greet update.........

Bro!

You may say what ever you feel

But can you mention any Box who can flash/unlock this phone at the moment?

Br,
Shadab Ahmad

[[Shadab_M]]

@Odia Bro!

[1331] Option automatically goes ON on every start up.

It should remember its last state, whether ON or OFF.

Please check it.

Br,
Shadab Ahmad

[GsmMunna]

HWK V 2.0.8.5 (Direct Link)

http://www.gsmmunna.com/HWK_Suite_Minor_v02.08.005.exe


Note: Link Avaliable For Next 20 Days.


Munna.

[[Shadab_M]]

It is really a nice feature to protect phone being flashed by wrong flash files.




Br,
Shadab Ahmad

[Odia The Ultimate]

Originally Posted by shadab_a4u

@Odia Bro!

[1331] Option automatically goes ON on every start up.

It should remember its last state, whether ON or OFF.

Please check it.

Br,
Shadab Ahmad

It was designed that way, since it should only be turned off by expert users

Some notes and points about the solution and the issue, since it seems you are crazy on this issue

First off we a inclined to think the issue is a bug in the later loaders and N0k1a have not noticed since they use external vpp.

When using dual line and internal vpp, the phone generates the vpp internal to itself, between 1.8 - 2.0v, we are under the impression that some generate this vpp too low, maybe close to 1.8v which is not enough. Remember when using dual line, box vpp is turned into tx2 signal.

The UFS BB5 VPP generator can be modified in two ways, one is to cut the vpp to the external rj45 and add a 9v battery connector or to move the external vpp from pin 8 to pin 2, but that would require cable mods too (I use this option)

We chose to use the old loader because this does a full and 100% flashing of the phone, to skip erase may lead to problems, you may worry about all those none erased bytes

Thanks for your time during the issue and looking into various things and also for the testing since the release.

Odia.

[software zone]

dct4 ask reading work perfect.i try now working good but rpl wrting not working yet.plz iprove the writing rpl procetuer for dct4.

[kasamiko]

I can't install...why? See image below..

[agadir5241]

e250i unlock done.


Software: E250iJVIB2
Hardware: MP 0.600
Regions : Africa,Middle East
Language: en,fr,pt,tr(ar,de,es,fa,it,nl)
Release : 2009 February Rev: 2
MSL Active
MSL Deactivated
S/N : RU7S417468
IMEI: 35xxxxxxxxxxxxxxx
BTID: 0024:91E53CD
Flags: 00000001 [Locked]
Key M: 16476500 [MASTER]
Prov : 604-01 IAM, Morocco
Key 1: 37371620, 00000000 [NET]
Key 2: 00000000, 00000000
Key 3: 00000000, 00000000
Key 4: 00000000, 00000000
Key 5: 00000000, 00000000
Key 6: 00000000, 00000000
Key 7: 00000000, 00000000
SIMLOCK STATUS: 0001
MCC-MNC: 604-01 IAM, Morocco
MASTER KEY: 16476500
NET 37371620, 00000000
SUB 00000000, 00000000
SP 00000000, 00000000
CP 00000000, 00000000
SIM 00000000, 00000000
ACT 00000000, 00000000
PLK 00000000, 00000000
Unlock KeyString:
#SIMLOCK*NET*37371620#

SLOCK Reset, Ok
Unlock Done