HWK Release 14/05/2007 - Discussion - Page 5 - GSM-Forum

ashok_kumar459 · 05-15-2007, 17:27

unlocking is sucess. but problem in flashing n70
after installing 2.05.002 the results are in hwk

1st BOOT : C0,0C [Rm-84]
OMAP ID : 17100701
OMAP MODE : 00
OMAP PBID : 04C48AFAB0C7823629C139E9E98903229707DC0E
OMAP HASH : 2C05369F57CC3C4CF9E783E83D9B512B
OMAP ROID : AB5E4ADB27A06946
RAPx ID : 000000010000022600010006000C192101002200
EM 1 ID : 00000232
EM 2 ID : 00000353
RAPx PBID : 15E0001377CD58519EB0365CD288B98B909A26A3
RAPx MODE : 00
RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14
RAPx ROID : F28A211FCEA7B19D
CMT 1st Boot OK
CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.20.2
CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB
CMT FLCNT : 000000000000000000000000000000000000
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT Alg Boot OK
Using Internal VPP
Erase Area: CMT 0x00000000-0052B469
Erase Area: CMT 0x006A0000-006BFFFF
Erase Area: CMT 0x006DF000-006EFFFF
Erase Area: CMT 0x00700000-007EFFFF
CMT FLASH ERASE OK, Time: 00:39
CMT FLASH WRITE OK, Time: 00:36
1st BOOT : C0,0C [Rm-84]
OMAP ID : 17100701
OMAP MODE : 00
OMAP PBID : 04C48AFAB0C7823629C139E9E98903229707DC0E
OMAP HASH : 2C05369F57CC3C4CF9E783E83D9B512B
OMAP ROID : AB5E4ADB27A06946
RAPx ID : 000000010000022600010006000C192101002200
EM 1 ID : 00000232
EM 2 ID : 00000353
RAPx PBID : 15E0001377CD58519EB0365CD288B98B909A26A3
RAPx MODE : 00
RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14
RAPx ROID : F28A211FCEA7B19D
CMT 1st Boot OK
CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.20.2
CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB
CMT FLCNT : 000000000000000000000000000000000000
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT Alg Boot OK
APE 2nd Bt: helen3_2nd.fg, Ver: 1.32.0
APE FLID : 00980036-00000000, Tos No Name
APE REALG : OMAP1610 GBBM-1.8.1 ALG
APE FLCNT : 010000020000000600000000000000000000
APE 2nd Boot OK
APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.31.0
PUB SIG 0 : 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
PUB SIG 1 : 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
APE Alg Boot OK
Using Internal VPP
Erase Area: APE 0x00000000-0000FFFF
Erase Area: APE 0x00010000-0001FFFF
Erase Area: APE 0x00020000-000203FF
Erase Area: APE 0x00050000-03ECFFFF
APE FLASH ERASE OK, Time: 00:05
APE FLASH WRITE OK, Time: 02:46
1st BOOT : C0,0C [Rm-84]
OMAP ID : 17100701
OMAP MODE : 00
OMAP PBID : 04C48AFAB0C7823629C139E9E98903229707DC0E
OMAP HASH : 2C05369F57CC3C4CF9E783E83D9B512B
OMAP ROID : AB5E4ADB27A06946
RAPx ID : 000000010000022600010006000C192101002200
EM 1 ID : 00000232
EM 2 ID : 00000353
RAPx PBID : 15E0001377CD58519EB0365CD288B98B909A26A3
RAPx MODE : 00
RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14
RAPx ROID : F28A211FCEA7B19D
CMT 1st Boot OK
CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.20.2
CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB
CMT FLCNT : 000000000000000000000000000000000000
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT Alg Boot OK
APE 2nd Bt: helen3_2nd.fg, Ver: 1.32.0
ERR: APE 2nd Boot APE 2ND REQ: 0700000000B172.7
Process Failed, Repowering Mobile

uninstall and 2.05.000 install old ver the phone is flashing sucess. there is problem today 02 update ver. mr.dejan

1st BOOT : C0,0C [Rm-84]
OMAP ID : 17100701
OMAP MODE : 00
OMAP PBID : 04C48AFAB0C7823629C139E9E98903229707DC0E
OMAP HASH : 2C05369F57CC3C4CF9E783E83D9B512B
OMAP ROID : AB5E4ADB27A06946
RAPx ID : 000000010000022600010006000C192101002200
EM 1 ID : 00000232
EM 2 ID : 00000353
RAPx PBID : 15E0001377CD58519EB0365CD288B98B909A26A3
RAPx MODE : 00
RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14
RAPx ROID : F28A211FCEA7B19D
CMT 1st Boot OK
CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.20.2
CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB
CMT FLCNT : 000000000000000000000000000000000000
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT Alg Boot OK
Using Internal VPP
Erase Area: CMT 0x00000000-0052B469
Erase Area: CMT 0x006A0000-006BFFFF
Erase Area: CMT 0x006DF000-006EFFFF
Erase Area: CMT 0x00700000-007EFFFF
CMT FLASH ERASE OK, Time: 00:39
CMT FLASH WRITE OK, Time: 00:31
1st BOOT : C0,0C [Rm-84]
OMAP ID : 17100701
OMAP MODE : 00
OMAP PBID : 04C48AFAB0C7823629C139E9E98903229707DC0E
OMAP HASH : 2C05369F57CC3C4CF9E783E83D9B512B
OMAP ROID : AB5E4ADB27A06946
RAPx ID : 000000010000022600010006000C192101002200
EM 1 ID : 00000232
EM 2 ID : 00000353
RAPx PBID : 15E0001377CD58519EB0365CD288B98B909A26A3
RAPx MODE : 00
RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14
RAPx ROID : F28A211FCEA7B19D
CMT 1st Boot OK
CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.20.2
CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB
CMT FLCNT : 000000000000000000000000000000000000
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT Alg Boot OK
APE 2nd Bt: helen3_2nd.fg, Ver: 1.32.0
APE FLID : 00980036-00000000, Tos No Name
APE REALG : OMAP1610 GBBM-1.8.1 ALG
APE FLCNT : 010000020000000600000000000000000000
APE 2nd Boot OK
APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.31.0
PUB SIG 0 : 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
PUB SIG 1 : 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
APE Alg Boot OK
Using Internal VPP
Erase Area: APE 0x00000000-0000FFFF
Erase Area: APE 0x00010000-0001FFFF
Erase Area: APE 0x00020000-000203FF
Erase Area: APE 0x00050000-03ECFFFF
APE FLASH ERASE OK, Time: 00:05
APE FLASH WRITE OK, Time: 02:35
1st BOOT : C0,0C [Rm-84]
OMAP ID : 17100701
OMAP MODE : 00
OMAP PBID : 04C48AFAB0C7823629C139E9E98903229707DC0E
OMAP HASH : 2C05369F57CC3C4CF9E783E83D9B512B
OMAP ROID : AB5E4ADB27A06946
RAPx ID : 000000010000022600010006000C192101002200
EM 1 ID : 00000232
EM 2 ID : 00000353
RAPx PBID : 15E0001377CD58519EB0365CD288B98B909A26A3
RAPx MODE : 00
RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14
RAPx ROID : F28A211FCEA7B19D
CMT 1st Boot OK
CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.20.2
CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB
CMT FLCNT : 000000000000000000000000000000000000
CMT 2nd Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT Alg Boot OK
APE 2nd Bt: helen3_2nd.fg, Ver: 1.32.0
APE FLID : 00980036-00000000, Tos No Name
APE REALG : OMAP1610 GBBM-1.8.1 ALG
APE FLCNT : 010000020000000600000000000000000000
APE 2nd Boot OK
APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.31.0
PUB SIG 0 : 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
PUB SIG 1 : 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
APE Alg Boot OK
Using Internal VPP
Erase Area: APE 0x01AE0000-02AFFFFF
Erase Area: APE 0x02B00000-03ECFFFF
PPM FLASH ERASE OK, Time: 00:03
PPM FLASH WRITE OK, Time: 01:14
Flashing Completed, Rebooting Mobile

the phone working fine with old ver.

hakeemtucker · 05-15-2007, 17:32

Quote:

Originally Posted by Ashwani Gaur

*************************************
pls donot forget the LG Module.
also remove Moto Module, if possible replace it with P2K_Moto
wbr
AshwaniGaur

That's A great idea!
What About KZF?? k310,w300, and Others ,,,,,,,,,,,,,,,,
Should CUSTOMERS wait for update ,Or Acquire new equipment to Service these Models?????
HWK TEAM
Please Relate to Us Customers What to expect

XisiX · 05-15-2007, 19:26

Quote:

Originally Posted by ashok_kumar459

unlocking is sucess. but problem in flashing n70
after installing 2.05.002 the results are in hwk

...........................

uninstall and 2.05.000 install old ver the phone is flashing sucess. there is problem today 02 update ver. mr.dejan

....................

the phone working fine with old ver.

Problems in flashing BB5 arised with DCTxBB5 v2.0.5. In most of cases even if flashing goes w/o errors, phone went dead.

Saras should check this out.

tsarkh · 05-15-2007, 21:17

hi all and thanks to saras team
i got one N90 with invalid sim but the imei is correct
when i read info by hwk i saw that the phone has :FFFFFFFFFFFFF in sp provider
what can i do to make it in other code instead of FFFFFFFFFFFFF???
can i write PM with 308 field to change it or not???

.:GSM International:. · 05-15-2007, 21:21

Quote:

Originally Posted by huzsolt

6630 unlocked OK, 6680 code readed, but Unlock counter was already blocked, I made it with Dejan's SW.
BTW how can I reset counter with HWK?

Hi

I reset the code counters using the original dejan soft simply by writing backup to phone, the only thing is, i had no backup to write!

It didnt particularly bother me, cos i was testing and playing with an old 6630 i had here.

I'm not saying that this will work for everyone, but if you have an old s.hitter knocking around that you dont care if it dies then test it, it worked for me!

@ SmartBOY, ppl here have a point, you did brag for ages about having a bb5 unlocker, so, maybe now is free you would care to share with us your solution?

As for KZF, it is being worked upon by Saras, he hasnt forgotten it, but it making more user friendly, for ppl not with knowledge or common sense!

hmidou · 05-15-2007, 21:25

dreams update

big thx

ReGards .. Faisal

Preco · 05-15-2007, 22:00

Nice, Thanx Odia,Thanx Dejan

SM4RTBOY · 05-16-2007, 01:10

Quote:

Originally Posted by .:GSM International:.

Hi

I reset the code counters using the original dejan soft simply by writing backup to phone, the only thing is, i had no backup to write!

It didnt particularly bother me, cos i was testing and playing with an old 6630 i had here.

I'm not saying that this will work for everyone, but if you have an old s.hitter knocking around that you dont care if it dies then test it, it worked for me!

@ SmartBOY, ppl here have a point, you did brag for ages about having a bb5 unlocker, so, maybe now is free you would care to share with us your solution?

As for KZF, it is being worked upon by Saras, he hasnt forgotten it, but it making more user friendly, for ppl not with knowledge or common sense!

I can't put my old job in risk !

br

sm4rtboy

[Rod] · 05-16-2007, 02:41

so saras is doing a version specialy for smart$****??? one big button to unlock the phones. only this way he can do it man... ! Gsm internation please test the new kzf make sure that smart$hit haves 50% possibility of hitting unlock button when he clicks the left button of the mouse. he didn't release the solution because the job. well a noble decision. there's too much trash to get out of the streets.

regards

huzsolt · 05-16-2007, 06:23

Quote:

Originally Posted by .:GSM International:.

Hi

I reset the code counters using the original dejan soft simply by writing backup to phone, the only thing is, i had no backup to write!

It didnt particularly bother me, cos i was testing and playing with an old 6630 i had here.

than make backup with Dejan's soft, and unlock it with that backup. Just unlock it as in manual. It will reset counter too.

sorry for offtopic

jimmtlp · 05-16-2007, 07:41

Thank's for sharing this info.

adebam · 05-16-2007, 08:20

Can someone tell in particular which cable to use? I have one 6680 with version V2.04.15. dOES THIS FALLS UNDER RAP3G SUPPORTED BY THIS SOFT. Thanks for a usefull information to come.
adebam

huzsolt · 05-16-2007, 09:36

Use standard 6680 fbus cable and HWK release 205.2

denard · 05-16-2007, 09:53

ok thank brother for this nice information

J.F.M. · 05-16-2007, 11:53

Thanks sara for this quick update.

Anyone can give the correct procedure on how to unlock BB5 using hwk. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HWK Release 14/05/2008 - Discussion	Odia The Ultimate	HWK	43	07-15-2008 23:59
HWK Release 29/05/2007 - Discussion	Odia The Ultimate	HWK	90	08-05-2007 07:39
HWK Release 23/05/2007 - Discussion	Odia The Ultimate	HWK	83	06-10-2007 10:53
HWK Release 30/04/2007 - Discussion	Odia The Ultimate	HWK	101	06-01-2007 10:07
HWK Release 10/05/2007 - Discussion	Odia The Ultimate	HWK	57	05-25-2007 01:09

05-15-2007, 17:27	#61 (permalink)
ashok_kumar459 No Life Poster Join Date: Nov 2005 Location: TIRUPUR Posts: 552 Member: 202500 Status: Offline Thanks Meter: 234	unlocking is sucess. but problem in flashing n70 after installing 2.05.002 the results are in hwk 1st BOOT : C0,0C [Rm-84] OMAP ID : 17100701 OMAP MODE : 00 OMAP PBID : 04C48AFAB0C7823629C139E9E98903229707DC0E OMAP HASH : 2C05369F57CC3C4CF9E783E83D9B512B OMAP ROID : AB5E4ADB27A06946 RAPx ID : 000000010000022600010006000C192101002200 EM 1 ID : 00000232 EM 2 ID : 00000353 RAPx PBID : 15E0001377CD58519EB0365CD288B98B909A26A3 RAPx MODE : 00 RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14 RAPx ROID : F28A211FCEA7B19D CMT 1st Boot OK CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.20.2 CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB CMT FLCNT : 000000000000000000000000000000000000 CMT 2nd Boot OK CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5 CMT Alg Boot OK Using Internal VPP Erase Area: CMT 0x00000000-0052B469 Erase Area: CMT 0x006A0000-006BFFFF Erase Area: CMT 0x006DF000-006EFFFF Erase Area: CMT 0x00700000-007EFFFF CMT FLASH ERASE OK, Time: 00:39 CMT FLASH WRITE OK, Time: 00:36 1st BOOT : C0,0C [Rm-84] OMAP ID : 17100701 OMAP MODE : 00 OMAP PBID : 04C48AFAB0C7823629C139E9E98903229707DC0E OMAP HASH : 2C05369F57CC3C4CF9E783E83D9B512B OMAP ROID : AB5E4ADB27A06946 RAPx ID : 000000010000022600010006000C192101002200 EM 1 ID : 00000232 EM 2 ID : 00000353 RAPx PBID : 15E0001377CD58519EB0365CD288B98B909A26A3 RAPx MODE : 00 RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14 RAPx ROID : F28A211FCEA7B19D CMT 1st Boot OK CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.20.2 CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB CMT FLCNT : 000000000000000000000000000000000000 CMT 2nd Boot OK CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5 CMT Alg Boot OK APE 2nd Bt: helen3_2nd.fg, Ver: 1.32.0 APE FLID : 00980036-00000000, Tos No Name APE REALG : OMAP1610 GBBM-1.8.1 ALG APE FLCNT : 010000020000000600000000000000000000 APE 2nd Boot OK APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.31.0 PUB SIG 0 : 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D PUB SIG 1 : 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D APE Alg Boot OK Using Internal VPP Erase Area: APE 0x00000000-0000FFFF Erase Area: APE 0x00010000-0001FFFF Erase Area: APE 0x00020000-000203FF Erase Area: APE 0x00050000-03ECFFFF APE FLASH ERASE OK, Time: 00:05 APE FLASH WRITE OK, Time: 02:46 1st BOOT : C0,0C [Rm-84] OMAP ID : 17100701 OMAP MODE : 00 OMAP PBID : 04C48AFAB0C7823629C139E9E98903229707DC0E OMAP HASH : 2C05369F57CC3C4CF9E783E83D9B512B OMAP ROID : AB5E4ADB27A06946 RAPx ID : 000000010000022600010006000C192101002200 EM 1 ID : 00000232 EM 2 ID : 00000353 RAPx PBID : 15E0001377CD58519EB0365CD288B98B909A26A3 RAPx MODE : 00 RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14 RAPx ROID : F28A211FCEA7B19D CMT 1st Boot OK CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.20.2 CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB CMT FLCNT : 000000000000000000000000000000000000 CMT 2nd Boot OK CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5 CMT Alg Boot OK APE 2nd Bt: helen3_2nd.fg, Ver: 1.32.0 ERR: APE 2nd Boot APE 2ND REQ: 0700000000B172.7 Process Failed, Repowering Mobile uninstall and 2.05.000 install old ver the phone is flashing sucess. there is problem today 02 update ver. mr.dejan 1st BOOT : C0,0C [Rm-84] OMAP ID : 17100701 OMAP MODE : 00 OMAP PBID : 04C48AFAB0C7823629C139E9E98903229707DC0E OMAP HASH : 2C05369F57CC3C4CF9E783E83D9B512B OMAP ROID : AB5E4ADB27A06946 RAPx ID : 000000010000022600010006000C192101002200 EM 1 ID : 00000232 EM 2 ID : 00000353 RAPx PBID : 15E0001377CD58519EB0365CD288B98B909A26A3 RAPx MODE : 00 RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14 RAPx ROID : F28A211FCEA7B19D CMT 1st Boot OK CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.20.2 CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB CMT FLCNT : 000000000000000000000000000000000000 CMT 2nd Boot OK CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5 CMT Alg Boot OK Using Internal VPP Erase Area: CMT 0x00000000-0052B469 Erase Area: CMT 0x006A0000-006BFFFF Erase Area: CMT 0x006DF000-006EFFFF Erase Area: CMT 0x00700000-007EFFFF CMT FLASH ERASE OK, Time: 00:39 CMT FLASH WRITE OK, Time: 00:31 1st BOOT : C0,0C [Rm-84] OMAP ID : 17100701 OMAP MODE : 00 OMAP PBID : 04C48AFAB0C7823629C139E9E98903229707DC0E OMAP HASH : 2C05369F57CC3C4CF9E783E83D9B512B OMAP ROID : AB5E4ADB27A06946 RAPx ID : 000000010000022600010006000C192101002200 EM 1 ID : 00000232 EM 2 ID : 00000353 RAPx PBID : 15E0001377CD58519EB0365CD288B98B909A26A3 RAPx MODE : 00 RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14 RAPx ROID : F28A211FCEA7B19D CMT 1st Boot OK CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.20.2 CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB CMT FLCNT : 000000000000000000000000000000000000 CMT 2nd Boot OK CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5 CMT Alg Boot OK APE 2nd Bt: helen3_2nd.fg, Ver: 1.32.0 APE FLID : 00980036-00000000, Tos No Name APE REALG : OMAP1610 GBBM-1.8.1 ALG APE FLCNT : 010000020000000600000000000000000000 APE 2nd Boot OK APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.31.0 PUB SIG 0 : 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D PUB SIG 1 : 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D APE Alg Boot OK Using Internal VPP Erase Area: APE 0x00000000-0000FFFF Erase Area: APE 0x00010000-0001FFFF Erase Area: APE 0x00020000-000203FF Erase Area: APE 0x00050000-03ECFFFF APE FLASH ERASE OK, Time: 00:05 APE FLASH WRITE OK, Time: 02:35 1st BOOT : C0,0C [Rm-84] OMAP ID : 17100701 OMAP MODE : 00 OMAP PBID : 04C48AFAB0C7823629C139E9E98903229707DC0E OMAP HASH : 2C05369F57CC3C4CF9E783E83D9B512B OMAP ROID : AB5E4ADB27A06946 RAPx ID : 000000010000022600010006000C192101002200 EM 1 ID : 00000232 EM 2 ID : 00000353 RAPx PBID : 15E0001377CD58519EB0365CD288B98B909A26A3 RAPx MODE : 00 RAPx HASH : E9EFF4BFAA5393217CA6B17755FC3E14 RAPx ROID : F28A211FCEA7B19D CMT 1st Boot OK CMT 2nd Bt: RAP3Gv2_2nd.fg, Ver: 1.20.2 CMT FLID0 : 00EC2250-00000121, Sam K8S6415ETB CMT FLCNT : 000000000000000000000000000000000000 CMT 2nd Boot OK CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5 CMT Alg Boot OK APE 2nd Bt: helen3_2nd.fg, Ver: 1.32.0 APE FLID : 00980036-00000000, Tos No Name APE REALG : OMAP1610 GBBM-1.8.1 ALG APE FLCNT : 010000020000000600000000000000000000 APE 2nd Boot OK APE ALG0 : h3_sam_nand_gbbm.fg, Ver: 1.31.0 PUB SIG 0 : 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D PUB SIG 1 : 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D APE Alg Boot OK Using Internal VPP Erase Area: APE 0x01AE0000-02AFFFFF Erase Area: APE 0x02B00000-03ECFFFF PPM FLASH ERASE OK, Time: 00:03 PPM FLASH WRITE OK, Time: 01:14 Flashing Completed, Rebooting Mobile the phone working fine with old ver.

05-15-2007, 21:17	#64 (permalink)
tsarkh No Life Poster Join Date: Jul 2005 Location: France Age: 48 Posts: 6,857 Member: 165812 Status: Offline Sonork: 100:1627635 Thanks Meter: 4,267	hi all and thanks to saras team i got one N90 with invalid sim but the imei is correct when i read info by hwk i saw that the phone has :FFFFFFFFFFFFF in sp provider what can i do to make it in other code instead of FFFFFFFFFFFFF??? can i write PM with 308 field to change it or not???

05-15-2007, 21:25	#66 (permalink)
hmidou Junior Member Join Date: Sep 2004 Age: 63 Posts: 11 Member: 84497 Status: Offline Thanks Meter: 0	dreams update big thx ReGards .. Faisal

05-15-2007, 22:00	#67 (permalink)
Preco Freak Poster Join Date: Apr 2004 Location: Croatia, Pozega Age: 44 Posts: 415 Member: 63968 Status: Offline Thanks Meter: 7	Nice, Thanx Odia,Thanx Dejan

05-16-2007, 02:41	#69 (permalink)
[Rod] No Life Poster Join Date: Jun 2003 Location: somewhere Age: 40 Posts: 2,318 Member: 31028 Status: Offline Thanks Meter: 56	so saras is doing a version specialy for smart$****??? one big button to unlock the phones. only this way he can do it man... ! Gsm internation please test the new kzf make sure that smart$hit haves 50% possibility of hitting unlock button when he clicks the left button of the mouse. he didn't release the solution because the job. well a noble decision. there's too much trash to get out of the streets. regards

05-16-2007, 07:41	#71 (permalink)
jimmtlp Freak Poster Join Date: Aug 2002 Location: Malaysia Posts: 99 Member: 14689 Status: Offline Thanks Meter: 1	Thank's for sharing this info.

05-16-2007, 08:20	#72 (permalink)
adebam No Life Poster Join Date: Sep 2005 Location: Nigeria, Oyo state Age: 48 Posts: 643 Member: 180091 Status: Offline Thanks Meter: 62	Can someone tell in particular which cable to use? I have one 6680 with version V2.04.15. dOES THIS FALLS UNDER RAP3G SUPPORTED BY THIS SOFT. Thanks for a usefull information to come. adebam

05-16-2007, 09:36	#73 (permalink)
huzsolt No Life Poster Join Date: Jul 2004 Location: YODAFON Posts: 1,522 Member: 75392 Status: Offline Sonork: 100.81199 Thanks Meter: 136	Use standard 6680 fbus cable and HWK release 205.2

05-16-2007, 09:53	#74 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	ok thank brother for this nice information

05-16-2007, 11:53	#75 (permalink)
J.F.M. Freak Poster Join Date: Dec 2006 Posts: 115 Member: 412458 Status: Offline Thanks Meter: 6	Thanks sara for this quick update. Anyone can give the correct procedure on how to unlock BB5 using hwk. Thanks