J700 flash make me crazy!!!! - GSM-Forum

denard · 11-18-2008, 22:22

i have j700 that always off. so i want to flash it but it can't boot. when click "mobile info" or "unlock", it read phone without problem after enter test mode. but when i try "read e2p", "write flash" etc... i just have "1st boot failed" w/o battery the same story. really what wrong with the phone?

i'm really crazy with this phone after many attempts nothing. how can i do to flash it? i always unlock and flash J700 with this cable now can't boot only read and unlock work

jeanbrume · 11-19-2008, 04:08

tray change baude rate to115200...it worked for me.

jeanbrume · 11-19-2008, 04:10

& check if ur cable e210

denard · 11-20-2008, 23:56

baudrate change can't do anything. cable is E210 and i always use it to unlock and flash. but why it read info well but refuse to boot when try flash?

Major-T · 11-21-2008, 01:03

maybe box is clone ?
Clone box do all on swift phones, except boot

f164 · 11-21-2008, 01:11

i think this model needs 2 types of cables one for flash and one for test mode i suggest to use nspro c450 cable and see the results for flash

Odia The Ultimate · 11-21-2008, 02:53

Quote:

Originally Posted by f164

i think this model needs 2 types of cables one for flash and one for test mode i suggest to use nspro c450 cable and see the results for flash

That is true in the case of Trident phones, but not for Swift ...

@Denard,

Look at your E210 cable's RJ45 plug, can you see a wire on pin 2? If so open the phone connector and de-solder this wire and try again.

Odia.

f164 · 11-21-2008, 11:55

Quote:

Originally Posted by Odia The Ultimate

That is true in the case of Trident phones, but not for Swift ...

@Denard,

Look at your E210 cable's RJ45 plug, can you see a wire on pin 2? If so open the phone connector and de-solder this wire and try again.

Odia.

yes that's right i make a confusion with c180

kishalayabiswas · 11-25-2010, 22:04

cant flash j700
mobile info ok

Quote:

Software: J700DDHC1
Hardware: MP 0.300
Regions : India
Language: en(bn,gu,hi,kn,mr,ms,pa,ta,te)
Release : 2008 March Rev: 1
MSL Active
S/N : RW3QC00661
IMEI: 353740-**-*****-9
BTID: 0023:39:FD021B
MSL Active
SIMLOCK STATUS: 0000
MCC-MNC: 000-000
MASTER KEY: 66504440
NET 00000000, 00000000
SUB 00000000, 00000000
SP 00000000, 00000000
CP 00000000, 00000000
SIM 00000000, 00000000
ACT 00000000, 00000000
PLK 00000000, 00000000

e2p backup ok

but when i try to read flash it gives error

Quote:

MCU Id: 3721, PNX6511
Preloader Ok, 230400 Baud
2nd Boot Failed: not Run

when i try to write flash it give error

Quote:

MCU File: J700XEHA3.cla CRC32: 72D4ADF7
TFS File: J700XEHA3.tfs CRC32: FB5F2C4B
CFG File: J700XEHA3.cfg 76732 byte(s)
MCU Id: 3721, PNX6511
Preloader Ok, 230400 Baud
2nd Boot Failed: not Run

thx
KB

leonard devinci · 11-26-2010, 00:19

I think all was explained by @Denard & Odia
check your cable ( change if possible or open to see wire connectivite ) , or press power button to boot your phone with software .

choclate_ · 11-28-2010, 05:27

try without batrry if not work than use e210 nspro cable work for me many times

Vijendra Saini · 11-28-2010, 07:03

Quote:

Originally Posted by choclate_

try without batrry if not work than use e210 nspro cable work for me many times

Did you see last 4 to 5 thread e210 cable not working so that means c450 might be worked.

Br.
Vijendra Saini.

11-18-2008, 22:22	#1 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	J700 flash make me crazy!!!! i have j700 that always off. so i want to flash it but it can't boot. when click "mobile info" or "unlock", it read phone without problem after enter test mode. but when i try "read e2p", "write flash" etc... i just have "1st boot failed" w/o battery the same story. really what wrong with the phone? i'm really crazy with this phone after many attempts nothing. how can i do to flash it? i always unlock and flash J700 with this cable now can't boot only read and unlock work

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A31 Make me Crazy.. :( Pls Help Me..	LoveLess	E-Gold Based Phones	1	10-14-2007 13:41
c210 make me crazy plz help me	satcomhedi	Trident/AGERE Platform	9	08-19-2006 15:40
nokia phones making me crazy !!! can somebody really help	monti_908	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	03-13-2003 09:53
this 5210's are making me crazy need help	mobilemafia	Nokia Hardware & Hardware Repair	1	02-14-2003 06:02
the neu Vogue vers.make me crazy!an help.	bonanza	Philips	13	06-11-2001 06:42

11-19-2008, 04:08	#2 (permalink)
jeanbrume Freak Poster Join Date: May 2006 Location: agadir oufla. Posts: 364 Member: 273511 Status: Offline Thanks Meter: 84	tray change baude rate to115200...it worked for me.

11-19-2008, 04:10	#3 (permalink)
jeanbrume Freak Poster Join Date: May 2006 Location: agadir oufla. Posts: 364 Member: 273511 Status: Offline Thanks Meter: 84	& check if ur cable e210

11-20-2008, 23:56	#4 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	baudrate change can't do anything. cable is E210 and i always use it to unlock and flash. but why it read info well but refuse to boot when try flash?

11-21-2008, 01:03	#5 (permalink)
Major-T No Life Poster Join Date: Nov 2008 Location: Hate stupidity Posts: 1,907 Member: 904530 Status: Offline Thanks Meter: 517	maybe box is clone ? Clone box do all on swift phones, except boot

11-21-2008, 01:11	#6 (permalink)
f164 No Life Poster Join Date: Sep 2005 Location: algeria BBA BELIMOUR Age: 46 Posts: 2,522 Member: 184351 Status: Offline Thanks Meter: 263	i think this model needs 2 types of cables one for flash and one for test mode i suggest to use nspro c450 cable and see the results for flash

11-26-2010, 00:19	#10 (permalink)
leonard devinci Banned Join Date: Nov 2010 Location: where we take time for read Age: 38 Posts: 671 Member: 1440240 Status: Offline Sonork: JiBriL DcTeAm Thanks Meter: 116	I think all was explained by @Denard & Odia check your cable ( change if possible or open to see wire connectivite ) , or press power button to boot your phone with software .

11-28-2010, 05:27	#11 (permalink)
choclate_ No Life Poster Join Date: Jun 2010 Age: 74 Posts: 717 Member: 1323797 Status: Offline Thanks Meter: 154	try without batrry if not work than use e210 nspro cable work for me many times