Nokia 6131 Flash completed but still problem
 

I have flashed it 3 times but the problem is same. It turns on. On the screen Nokia appears for a few seconds and then display goes dem and then white. I downgrade the phone as well but no positive result. below is log.

Cannot Detect Mobile Brand
1ST BOOT : C0,07 [Rm-115]
RAPx ID : 000000010000022600010006010C192101001101
EM 1 ID : 00000232
EM 2 ID : 00000352
RAPx PBID : 0EE00013FED251569BD91BF1D9464F4D7E3BB625
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 1.21.0
CMT FLID0 : 0001002F-00006921, Amd 29NS256N
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT KSIG0 : A8192FC6AD7BF7A1A4419A3953F3856B1F3F7D4A
CMT VPP : Internal
CMT ALG Boot OK
IMAGE : rm115__06.60.mcusw
CMT NOR Erase Area: 0x00000000-000006BF
CMT NOR Erase Area: 0x000006C0-0001FFFF
CMT NOR Erase Area: 0x00020000-0007FFFF
CMT NOR Erase Area: 0x00080000-000DFFFF
CMT NOR Erase Area: 0x00100000-001FFFFF
CMT NOR Erase Area: 0x00200000-002DFFFF
CMT NOR Erase Area: 0x002E0000-00EDFFFF
CMT NOR Erase Area: 0x00EE0000-00EF7FFF
CMT NOR Erase Area: 0x00EF8000-00EFFFFF
CMT FLASH ERASE OK, Time: 01:03
CMT FLASH WRITE OK, Time: 01:19
1ST BOOT : C0,07 [Rm-115]
RAPx ID : 000000010000022600010006010C192101001101
EM 1 ID : 00000232
EM 2 ID : 00000352
RAPx PBID : 0EE00013FED251569BD91BF1D9464F4D7E3BB625
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 1.21.0
CMT FLID0 : 0001002F-00006921, Amd 29NS256N
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT KSIG0 : A8192FC6AD7BF7A1A4419A3953F3856B1F3F7D4A
CMT VPP : Internal
CMT ALG Boot OK
Chip SECTOR_SIZE: 128k
Warning, Must be Used 128Kb Sector_Size CNT File
128K Image Saved as: rm115__06.60.image_tmo_de_128
IMAGE : rm115__06.60.image_tmo_de
CMT NOR Erase Area: 0x01460000-01FDFFFF
CNT FLASH ERASE OK, Time: 00:36
CNT FLASH WRITE OK, Time: 00:35
1ST BOOT : C0,07 [Rm-115]
RAPx ID : 000000010000022600010006010C192101001101
EM 1 ID : 00000232
EM 2 ID : 00000352
RAPx PBID : 0EE00013FED251569BD91BF1D9464F4D7E3BB625
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 1.21.0
CMT FLID0 : 0001002F-00006921, Amd 29NS256N
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT KSIG0 : A8192FC6AD7BF7A1A4419A3953F3856B1F3F7D4A
CMT VPP : Internal
CMT ALG Boot OK
IMAGE : rm115__06.60.ppm_d
CMT NOR Erase Area: 0x00F00000-0145FFFF
PPM FLASH ERASE OK, Time: 00:21
PPM FLASH WRITE OK, Time: 00:26
Flashing Completed, Rebooting Mobile
UI Defaults Ok, Time: 00:32
Set UI Factory Defaults Ok, Time: 00:32
Set Full Factory Defaults Ok, Time: 00:31
Set Software Upgrade Defaults Ok, Time: 00:32
Set Security Ok, Time: 00:00
All Done, Time: 07:26

What kind of cable do you use to flash ?

Nokia 6031 5 pin cable and ufs interface.

6131 is a BB5 phone. Use 7 pin cable with ticked Dual Line option. It should be ok.

I have flashed N70, 6280 etc. many sets with 5 pin cable its ok. But now in bb5 setlist which models need 7 pin cables. Because I want to get that all cables from market. Or if it is possible to modify my 5 pin cable so what is process...

You May Need To buy One 7 Pin Cable...! More Over You Can Check Boot Ic Some Time It's H/W Prob....!


Munna.

I am new to hwk use. I do'nt know about 7 pin cable. Where it connects to phone?
1. Is it connect to Handsfree jack? Or
2. Is it connect on batery place like 5 pin cable?

Same place, same outlook, just has 7 pins.

Odia.

i have same problem ........flash 6131 with 7pin gpg cable flash ok but still ,,,,,,apear nokia then screen dem and white screen:confused: