Odia Bro! Help with Samsung L700!

[[Shadab_M]]

Hi Bro!

I got a L700 today in dead condition.
Tried to read flash for some reason.
But was unable to do so. Here is Read Flash Log.

PROD_ID: BDD30C2511
SCROM_V: PNX5220 V.06.01
CHIPSET: 3811
1st Boot Failed: BR_LOGIN_REQ

Please tell me what is BR_LOGIN_REQ?

Regards,
Shadab Ahmad

[multimedia]

Originally Posted by shadab_a4u

Hi Bro!

I got a L700 today in dead condition.
Tried to read flash for some reason.
But was unable to do so. Here is Read Flash Log.



Please tell me what is BR_LOGIN_REQ?

Regards,
Shadab Ahmad

I'm not that more professionnel then Mr Odia,respect to him,but my explanation to that is:BR_LOGIN_REQ means BootROM login not requested so it's damaged therefore you can revive it only by jtag solution !

[Odia The Ultimate]

Originally Posted by shadab_a4u

I got a L700 today in dead condition.
Tried to read flash for some reason.
But was unable to do so. Here is Read Flash Log.

Please tell me what is BR_LOGIN_REQ?

If you are wanting to read the E2P, I would suggest you first flash the MCU and after should be able to read E2P, I have not done much work with these Swift 3g phones, so would need to check finer details with Saras.

Originally Posted by multimedia

I'm not that more professionnel then Mr Odia,respect to him,but my explanation to that is:BR_LOGIN_REQ means BootROM login not requested so it's damaged therefore you can revive it only by jtag solution !

Maybe you mix here platform and talk about Qualcomm based phone?

Odia.

[multimedia]

I think that we could implement this solution as well Qualcomm based phones and for Swift 3G phones;thanks for reply .

[llcoolr]

same thing when try to flash
I've try to connect phone using usb cable (* and send ) or (# and pw key) but not detected
and with ufs here is log

Partition Table: l700_jp_comp.ptt
BAD_NAME: L700_JP_Comp.ptt

PROD_ID: 21C00CE98D
SCROM_V: PNX5220 V.06.01
CHIPSET: 3811
1st Boot Failed: BR_LOGIN_REQ

[Odia The Ultimate]

Originally Posted by llcoolr

same thing when try to flash
I've try to connect phone using usb cable (* and send ) or (# and pw key) but not detected

Since when USB flashing has been added for Swift 3g, you can see in the software to use NM_20 pin cable, so why use USB cable?

Odia.

[.:GSM International:.]

Originally Posted by Odia The Ultimate

Since when USB flashing has been added for Swift 3g, you can see in the software to use NM_20 pin cable, so why use USB cable?

Odia.

Thats easy to answer.

Clearly it is because they think they know better, and whatever is written on the software doesnt actually apply to them, and was written just for fun!

[llcoolr]

Originally Posted by .:GSM International:.

Thats easy to answer.

Clearly it is because they think they know better, and whatever is written on the software doesnt actually apply to them, and was written just for fun!

I've try usb with the original downloader " Flash loader v1.3 Lite 7.0.7 CRC STALL.exe " and i dont say that i know better my friend I'm just reporting so it may help someone
and today I've try with other handset and soft work pro pertly
here is log

Software: L700JVHJ2
Hardware: MP 0.401
Regions : Africa,Middle East
Language: en,fr,pt,tr(ar,de,es,fa,it,nl)                        
Release : 2008 October Rev: 2
MSL Active
S/N : RVVQB25938
IMEI: 358922-02-030347-8
BTID: 0023:D6:826195
SIMLOCK STATUS: 0000
MASTER KEY: 14789632
#SIMLOCK*NET*00000000#
#SIMLOCK*SUB*00000000#
#SIMLOCK*SP*00000000#
#SIMLOCK*CP*00000000#
#SIMLOCK*SIM*12369874#
#SIMLOCK*AUSIM#
#SIMLOCK*ACT#
 
PROD_ID: D55751110C
SCROM_V: PNX5220 V.06.01
CHIPSET: 3811
FLLDR_V: 7.0.7
FL_CHIP: K9F1G08Q0M
BOOT Ok, 921600 Baud
NAND Read Done, 3145728 byte(s), Time: 00:50
E2P Saved as C:\Program Files\SarasSoft\UFS\UFS_SAMs\L700\L700_D55751110C_E2P-readed.bin

[akulewe]

Originally Posted by llcoolr

I've try usb with the original downloader " Flash loader v1.3 Lite 7.0.7 CRC STALL.exe " and i dont say that i know better my friend I'm just reporting so it may help someone
and today I've try with other handset and soft work pro pertly
here is log

Software: L700JVHJ2
Hardware: MP 0.401
Regions : Africa,Middle East
Language: en,fr,pt,tr(ar,de,es,fa,it,nl)                        
Release : 2008 October Rev: 2
MSL Active
S/N : RVVQB25938
IMEI: 358922-02-030347-8
BTID: 0023:D6:826195
SIMLOCK STATUS: 0000
MASTER KEY: 14789632
#SIMLOCK*NET*00000000#
#SIMLOCK*SUB*00000000#
#SIMLOCK*SP*00000000#
#SIMLOCK*CP*00000000#
#SIMLOCK*SIM*12369874#
#SIMLOCK*AUSIM#
#SIMLOCK*ACT#
 
PROD_ID: D55751110C
SCROM_V: PNX5220 V.06.01
CHIPSET: 3811
FLLDR_V: 7.0.7
FL_CHIP: K9F1G08Q0M
BOOT Ok, 921600 Baud
NAND Read Done, 3145728 byte(s), Time: 00:50
E2P Saved as C:\Program Files\SarasSoft\UFS\UFS_SAMs\L700\L700_D55751110C_E2P-readed.bin

bro this is great,can you explain how you flashed that L700 and what soft did you use for it?
HOW DID PUT IT IN DOWNLOAD MODE?

[llcoolr]

Originally Posted by akulewe

bro this is great,can you explain how you flashed that L700 and what soft did you use for it?
HOW DID PUT IT IN DOWNLOAD MODE?

just plug c450 or e210 cable without batt and use ufs that's all