RM-122(6110n) gives an error during programing, and the schematic of all my cables!! - GSM-Forum

anas3001 · 10-31-2008, 20:15

Hi, when I'm trying to program the rm-122(6110n) after It erase the CMT Flash, and when trying to write CMT gives this ERR:

of course the phone is dead

and after I asked (a lot) I think it's the cable so I drew this schematic (for my four cables

)...

I posted the same problem for another rm-122(6110n) a several months ago right here...
http://forum.gsmhosting.com/vbb/showthread.php?t=522102

Scorpy · 11-01-2008, 11:13

Search for another scheme cause this one ain't good. You don't need any resistor on GND line but you need 5.3k on the BSI line. Between them is 68k and that is good. pin 3 on rj-45 is bsi, and pin 7 is gnd

imran_k · 11-01-2008, 11:19

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

anas3001 · 11-02-2008, 08:34

Quote:

Originally Posted by Scorpy

Search for another scheme cause this one ain't good. You don't need any resistor on GND line but you need 5.3k on the BSI line. Between them is 68k and that is good. pin 3 on rj-45 is bsi, and pin 7 is gnd

There's no pin 7!!

Quote:

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

Thanks but I don't use any external VPP adapter.

one of my friend told me that he saw a modified cable, but unfortunately he doesn't remember it's schematic. so please any one has a working cable please take a look and guide me to the right way

Scorpy · 11-02-2008, 09:50

Quote:

Originally Posted by Scorpy

Search for another scheme cause this one ain't good. You don't need any resistor on GND line but you need 5.3k on the BSI line. Between them is 68k and that is good. pin 3 on rj-45 is bsi, and pin 7 is gnd

Please read carefully what was written

anas3001 · 11-02-2008, 16:39

NOW IT WORKED

just replace the VPP with RX2

Thanks for every one

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 2310 Give This Error During Flashing I Need Help Pls	ojs	Nokia Digital Core Technology 4 ( DCT-4 )	1	07-08-2008 15:34
an error during format ffs --help	zone2	Infinity-Box	3	03-07-2008 08:34
Cable adapter and the use of 8 pin and 10 pin cables	m_dige	MT-BOX	4	08-13-2007 14:47
1100 giving me error during flashing	GOODNESS	Nokia Digital Core Technology 4 ( DCT-4 )	13	05-26-2005 19:41
PLEASE GIVE ME A PROG TO REPAIR THE SOFTWARE OF MY NOKIA 6310 PLEEASE	illias	Nokia Digital Core Technology 4 ( DCT-4 )	5	03-02-2002 00:21

11-01-2008, 11:13	#2 (permalink)
Scorpy Freak Poster Join Date: Apr 2002 Location: Yugoslavia Age: 47 Posts: 373 Member: 10594 Status: Offline Thanks Meter: 83	Search for another scheme cause this one ain't good. You don't need any resistor on GND line but you need 5.3k on the BSI line. Between them is 68k and that is good. pin 3 on rj-45 is bsi, and pin 7 is gnd

11-01-2008, 11:19	#3 (permalink)
imran_k Registered User Join Date: May 2004 Location: south africa Age: 41 Posts: 822 Member: 66075 Status: Offline Thanks Meter: 2	Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

11-02-2008, 16:39	#6 (permalink)
anas3001 Insane Poster Join Date: Nov 2006 Posts: 89 Member: 395940 Status: Offline Thanks Meter: 235	NOW IT WORKED just replace the VPP with RX2 Thanks for every one