S7070 RJ45 cable pinout needed - GSM-Forum

Dr_Wolodya · 05-12-2010, 19:27

I need to unlock S7070.
Code reading only using RJ45 Cable.

Code:

S7070 (CUNL,FL)  To read codes use:
[Mobile Info] button using USB Cable (Phone Switched-ON) 
and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)

Post please pinout.

Odia The Ultimate · 05-12-2010, 20:19

Why you not quote release text correctly?

QC Legacy BroadCom models introduced:
i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G,
S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C,
S7070 (CUNL,FL) To read codes use:
[Mobile Info] button using USB Cable (Phone Switched-ON)
and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)
QC Legacy BroadCom models Full Flashing (with BOOT Change)
[BOOT Repair] for QC Legacy BroadCom models added.
Boot Repair and Codes Read is possible only for phones with
NM_20 pin USB/RJ45 connector !

Dr_Wolodya · 05-13-2010, 09:33

Quote:

Originally Posted by Odia The Ultimate

Why you not quote release text correctly?

QC Legacy BroadCom models introduced:
i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G,
S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C,
S7070 (CUNL,FL) To read codes use:
[Mobile Info] button using USB Cable (Phone Switched-ON)
and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)
QC Legacy BroadCom models Full Flashing (with BOOT Change)
[BOOT Repair] for QC Legacy BroadCom models added.
Boot Repair and Codes Read is possible only for phones with
NM_20 pin USB/RJ45 connector !

What exactly I quote not correctly?
For unlock S7070 firstly need USB cable and after RJ-45.
Where I can find S7070 RJ-45 pinout?

..::alexis::.. · 05-13-2010, 11:16

Someone have successfully unlocked S7070 by HWK?

I tried to make adapter microUSB cable<> UFS RJ45 but not work. Using it or not- log is the same

xxxs2060 · 05-13-2010, 15:03

Boot Repair and Codes Read is possible only for phones with
NM_20 pin USB/RJ45 connector !

only fones with E210-like connector are supported .

Dr_Wolodya · 05-13-2010, 16:57

Quote:

Originally Posted by xxxs2060

Boot Repair and Codes Read is possible only for phones with
NM_20 pin USB/RJ45 connector !

only fones with E210-like connector are supported .

You mean that exist S7070 with microUSB connector and exist S7070 with NM_20 connector?

wisdom001 · 05-13-2010, 17:33

thank for this great update

Dr_Wolodya · 05-13-2010, 17:38

Quote:

Originally Posted by wisdom001

thank for this great update

You stupid! Go away from here with your great thank - this thread about pinout for RG-45 cable.

xxxs2060 · 05-13-2010, 17:42

Quote:

Originally Posted by Dr_Wolodya

You mean that exist S7070 with microUSB connector and exist S7070 with NM_20 connector?

i mean only others models with NM_20 conn (like s5230) .

Dr_Wolodya · 05-13-2010, 17:50

Quote:

Originally Posted by xxxs2060

i mean only others models with NM_20 conn (like s5230) .

But in release text exist "S7070 (CUNL,FL)"!
CUNL - codes unlock, FL - flashing. All right here?

BRANCO · 07-23-2010, 23:58

Then what is the end pinout for RJ45? Model S7070 only has micro USB.
How can you connect via the RJ45?
Post ansver mr. Odia
Thanks

GSM_STREET · 07-24-2010, 04:09

Can we use micro USB Cable with the 'USB female to RJ45' that was made to use with kg800 usb to make kg800 rj45?

..::alexis::.. · 07-30-2010, 11:13

Quote:

Originally Posted by GSM_STREET

Can we use micro USB Cable with the 'USB female to RJ45' that was made to use with kg800 usb to make kg800 rj45?

No. I try it. Not work. So I think there is no enought the only Rx, Tx and GND.
So now there are only phones with E210 connector are supported.
P.S. My phone was unlocked using alternative product.

GSM_STREET · 07-30-2010, 12:10

Quote:

Originally Posted by ..::alexis::..

No. I try it. Not work. So I think there is no enought the only Rx, Tx and GND.
So now there are only phones with E210 connector are supported.
P.S. My phone was unlocked using alternative product.

Try make the cable like gs102 with 130k ohm and 5V UFS RJ45 pinout end

GSM_STREET · 07-30-2010, 19:53

Quote:

Originally Posted by ..::alexis::..

No. I try it. Not work. So I think there is no enought the only Rx, Tx and GND.
So now there are only phones with E210 connector are supported.
P.S. My phone was unlocked using alternative product.

please try this pinout
N.B. i have not tested it do at your own risk!!!

Imageshack - bygsmstreet.jpg
http://img409.imageshack.us/i/bygsmstreet.jpg

05-12-2010, 19:27	#1 (permalink)
Dr_Wolodya No Life Poster Join Date: Jul 2004 Location: Ukraine Age: 44 Posts: 2,727 Member: 75408 Status: Offline Thanks Meter: 1,190	S7070 RJ45 cable pinout needed I need to unlock S7070. Code reading only using RJ45 Cable. Code: S7070 (CUNL,FL) To read codes use: [Mobile Info] button using USB Cable (Phone Switched-ON) and after [QCDI Info] button, using RJ45 Cable (Phone-OFF) Post please pinout.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
needed pinout for carkit(N61xx)	mobileinfo	Nokia Hardware & Hardware Repair	2	07-23-2013 02:41
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35
8810 mbus-cable	zfrank	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-19-1999 13:12

05-12-2010, 20:19	#2 (permalink)
Odia The Ultimate No Life Poster Join Date: Apr 2001 Location: Where dreams become reality. Age: 54 Posts: 5,752 Member: 4042 Status: Offline Thanks Meter: 24,043	Why you not quote release text correctly? QC Legacy BroadCom models introduced: i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G, S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C, S7070 (CUNL,FL) To read codes use: [Mobile Info] button using USB Cable (Phone Switched-ON) and after [QCDI Info] button, using RJ45 Cable (Phone-OFF) QC Legacy BroadCom models Full Flashing (with BOOT Change) [BOOT Repair] for QC Legacy BroadCom models added. Boot Repair and Codes Read is possible only for phones with NM_20 pin USB/RJ45 connector !

05-13-2010, 11:16	#4 (permalink)
..::alexis::.. No Life Poster Join Date: Jun 2006 Location: Ukraine Posts: 963 Member: 289200 Status: Offline Thanks Meter: 219	Someone have successfully unlocked S7070 by HWK? I tried to make adapter microUSB cable<> UFS RJ45 but not work. Using it or not- log is the same

05-13-2010, 15:03	#5 (permalink)
xxxs2060 Freak Poster Join Date: Oct 2005 Posts: 217 Member: 195599 Status: Offline Thanks Meter: 24	Boot Repair and Codes Read is possible only for phones with NM_20 pin USB/RJ45 connector ! only fones with E210-like connector are supported .

05-13-2010, 17:33	#7 (permalink)
wisdom001 No Life Poster Join Date: Jan 2008 Location: NIGERIA Posts: 890 Member: 676315 Status: Offline Thanks Meter: 120	thank for this great update

07-23-2010, 23:58	#11 (permalink)
BRANCO Freak Poster Join Date: Dec 2004 Age: 50 Posts: 196 Member: 94920 Status: Offline Thanks Meter: 22	Then what is the end pinout for RJ45? Model S7070 only has micro USB. How can you connect via the RJ45? Post ansver mr. Odia Thanks

07-24-2010, 04:09	#12 (permalink)
GSM_STREET No Life Poster Join Date: Oct 2009 Location: JAM Exploring Simlock 3!!! Age: 36 Posts: 947 Member: 1149815 Status: Offline Sonork: N/A for now Thanks Meter: 218	Can we use micro USB Cable with the 'USB female to RJ45' that was made to use with kg800 usb to make kg800 rj45?