UFS High Bauds Problem Solution Repair - GSM-Forum

teknotelgsm · 04-21-2008, 16:01

Problem:
--------
Communications faults when working on 921600, 460800 sppeds.
Solution:
--------
Add 27-47pf (Piko Farades) capacitor on FTDI232BM Chip
Pins 17(GND) and 24(RxD) as shown in pictures.

IkaMazini · 04-23-2008, 06:59

not working, tested

./././././././././././././././././././././././././././././././././././././././././

akhil_bbsr · 04-23-2008, 07:39

I Will Test It........

access_master · 04-23-2008, 07:56

not working tested , its fake by

asrar · 04-23-2008, 11:04

not working, tested..

Odia The Ultimate · 04-23-2008, 14:00

This helps high baud reads only, when poor quality cables are used, tested and working 100%.

Odia.

Sharpharp · 04-23-2008, 14:48

lets call this the "phuck up my UFS altogether by opening up and stickin $hit in, and told to contact my reseller" thread, hehe

IkaMazini · 04-23-2008, 15:41

Quote:

Originally Posted by Odia The Ultimate

This helps high baud reads only, when poor quality cables are used, tested and working 100%.

Odia.

when poor quality cables ????????

i have 100% new and good cables, for jaf woking fine, without any problem, never detected any problem.

teknotelgsm · 04-23-2008, 15:48

Not Fake

asrar · 04-23-2008, 16:44

Quote:

Originally Posted by Odia The Ultimate

This helps high baud reads only, when poor quality cables are used, tested and working 100%.

Odia.

we buy box from ur authorized reseller...
after that u said our cables is poor class...
mean u make poor class cables...
juke.....don't mind..

Ok we agree with u...

where from can we buy orignal cables....????

what's a test of good or poor class cables..???

Sir, can u give us clear answer???

thnx

Odia The Ultimate · 04-24-2008, 04:49

Quote:

Originally Posted by asrar

we buy box from ur authorized reseller...
after that u said our cables is poor class...
mean u make poor class cables...
juke.....don't mind..

You are missing my point ...

I mean that if your cables are good quality and you do not suffer from intermittent read errors at high baud rates, you do not need to make this mod.

If you do suffer from these read errors, then after making this mod, it should help.

Odia.

04-23-2008, 15:48	#9 (permalink)
teknotelgsm Banned Join Date: Jul 2004 Age: 46 Posts: 218 Member: 74464 Status: Offline Thanks Meter: 17	UFS High Bauds Problem Solution Repair Not Fake

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UFS High Bauds Problem Solution !!	.::Gorbagy::.	UFS2 + UFS3-Tornadoflasher	2	04-16-2008 21:18
lg high baud rate	shailccna	Various CDMA/TDMA Cell Phones	4	01-05-2007 04:42
Strange Ufs Problem And Repair!!!	Victor	UFS2 + UFS3-Tornadoflasher	17	11-11-2005 22:24

04-23-2008, 06:59	#2 (permalink)
IkaMazini No Life Poster Join Date: Jul 2005 Location: Georgia GE Posts: 2,694 Member: 162473 Status: Offline Sonork: Not have Thanks Meter: 592	not working, tested ./././././././././././././././././././././././././././././././././././././././././

04-23-2008, 07:39	#3 (permalink)
akhil_bbsr No Life Poster Join Date: May 2006 Location: MOBILE SOFTZONE BHUBANESWAR IN Posts: 3,509 Member: 271478 Status: Offline Sonork: 1590868 Thanks Meter: 1,070	I Will Test It........

04-23-2008, 07:56	#4 (permalink)
access_master Junior Member Join Date: Mar 2007 Posts: 3 Member: 473175 Status: Offline Thanks Meter: 0	not working tested , its fake by

04-23-2008, 11:04	#5 (permalink)
asrar Freak Poster Join Date: Apr 2006 Location: Punjab, Pakistan Age: 38 Posts: 298 Member: 264520 Status: Offline Thanks Meter: 61	not working, tested..

04-23-2008, 14:00	#6 (permalink)
Odia The Ultimate No Life Poster Join Date: Apr 2001 Location: Where dreams become reality. Age: 54 Posts: 5,752 Member: 4042 Status: Offline Thanks Meter: 24,043	This helps high baud reads only, when poor quality cables are used, tested and working 100%. Odia.

04-23-2008, 14:48	#7 (permalink)
Sharpharp Freak Poster Join Date: Sep 2002 Location: Voodoo L:ounge Posts: 204 Member: 15565 Status: Offline Thanks Meter: 3	lets call this the "phuck up my UFS altogether by opening up and stickin $hit in, and told to contact my reseller" thread, hehe