UNLOCK P990i "USER LOCK" - GSM-Forum

GAZZUZZ · 10-03-2006, 09:06

IS IT POSSIBLE TO UNLOCK P990i USING HWK IF YES HOW?

Kashif Khan · 01-25-2007, 22:15

Not possible in HWK but you can reset free your user code with setool.
BR
KAshif khan

kishalayabiswas · 01-25-2007, 22:23

UNLOCKING SONY ERICSSON P910i
EXPECTING UR ADVICE .

PLZ TELL ME HOW I UNLOCK THAT SAID PHONE , LOCKED BY VODAFONE UK
I HAV ONLY UFS BOXES

steps i followed in ufs ::

1>attaching T 28 data cable
2> connect and selet the model
3> press GO botton ^ put the batter within 5sec
4> after reading 40-45% phone automatically switch on & stop all functions

PLZ TELL ME THE PROPER STEPS TO UNLOCK THAT PHONE

THX IN ADVANCE
KISHALAYABISWAS

Kashif Khan · 01-25-2007, 22:28

How can you connect it with T28 cable?phone jeck is small like k750,and UFS can't do it.
If you wanna do it so buy another tool like setool.
BR
Kashif Khan

kishalayabiswas · 01-25-2007, 22:51

sir
SE P910i (non hwk model) data port compacatble wish T 28 data cable..plz chek it.. its also working and connecting, but some thing wrong in my steps to unlock SE P910i
...
thx for reply

cooleyes · 01-26-2007, 00:49

1> Attach T 28 data cable
2> connect and selet the model
3> press RSA

Phone will detected and u can unlock it & also restore Rsa or flash Mcu

if need help u can post here

Quote:

Originally Posted by kishalayabiswas

UNLOCKING SONY ERICSSON P910i
EXPECTING UR ADVICE .

PLZ TELL ME HOW I UNLOCK THAT SAID PHONE , LOCKED BY VODAFONE UK
I HAV ONLY UFS BOXES

steps i followed in ufs ::

1>attaching T 28 data cable
2> connect and selet the model
3> press GO botton ^ put the batter within 5sec
4> after reading 40-45% phone automatically switch on & stop all functions

PLZ TELL ME THE PROPER STEPS TO UNLOCK THAT PHONE

THX IN ADVANCE
KISHALAYABISWAS

cooleyes · 01-26-2007, 00:54

Thread is starded as P990 But now he is asking for unlocking of P910 (T28 Cable) & Ufs do it without any Problem just u need Mcu to avoid dead Phone after remove Rsa ..

Quote:

Originally Posted by Kashif Khan

How can you connect it with T28 cable?phone jeck is small like k750,and UFS can't do it.
If you wanna do it so buy another tool like setool.
BR
Kashif Khan

kishalayabiswas · 01-26-2007, 00:55

[b]thx mate..
i trying and post my result soon[:b]

kishalayabiswas · 01-26-2007, 01:00

before i start unlocking i select
mcu : P910_R4A006_162042_RsaOn.bis

its correct?

kishalayabiswas · 01-26-2007, 01:11

thx mate.. its all done..sucessfull

Mcu_Id: 5B 08 02 01 FF FF FF FF
Certificate Accepted
Prologue Ok
PayLoader Ok
Certificated Boot Ok, Time: 00:02
IMEI : 354235-00-258819-6
Ram_Ld: 031003 1530 EANCXC1327525_R1A
Fla_Ld: WAKCXC1327507_FLASH_LOADER_B R1A
RSA Flags Removed
Mcu_Id: 5B 08 02 01 FF FF FF FF
Secure Boot Ok, Time: 00:03
Fl_Id : 00898862 Intel 28F320W18T {2}
Blk_0 : 3E0000
IMEI : 354235-00-258819-6
ULock : Factory_Off : 0000
NCK : 82110220
NSCK : 70985399
CCK : 80152156
SPCK : 59993314
LockSt: Sim_Locks Open, Mcc+Mnc: FFF-FF, 5555 55
Mcu_Sw: R3E008 prgCXC162042_LAYLA_CERTIFIED
BackUp:'P910_354235002588196_1_26_2007_7_51_15_AM. sim'
MCU Flash Erased: 1 sector(s), Time: 00:00
MCU Flash Written: 65536 byte(s), Time: 00:01
MCU Flashing Done, Time: 00:03
Flash Recovery Done Using: P910_R3E008_162042_RsaOn.bis
OTP IMEI: 30-354235-00-258819-6, Locked
Old IMEI: 354235-00-258819-6
"New" Security Area Layout Detected
New IMEI: 354235-00-258819-6
GDFS Flash Erased: 1 sector(s), Time: 00:00
GDFS Flash Written: 20480 byte(s), Time: 00:00
GDFS Security Block Init Done, Time: 00:05

w.b.r
kishalayabiswas

BMobile · 01-26-2007, 04:50

Quote:

Originally Posted by Kashif Khan

Not possible in HWK but you can reset free your user code with setool.
BR
KAshif khan

Dear Sir !
Setool really can reset usercode for P990i for free and stand alone ? Not need any Credit ???

BMobile · 01-29-2007, 05:15

Can anyone confirm this information ? please !

***stanner_austin*** · 01-29-2007, 11:15

in p990i 2 phones base
new security base on server..
old security base standalone..
server base need credite

Wings · 02-02-2007, 23:15

Check the date thread started Clowns.

BR

shohag · 02-04-2007, 05:42

cruiser can do this 100%%%%%%%%%%%%%%%%

10-03-2006, 09:06	#1 (permalink)
GAZZUZZ Freak Poster Join Date: Dec 2005 Posts: 374 Member: 205128 Status: Offline Thanks: 14 Thanked 18 Times in 9 Posts	UNLOCK P990i "USER LOCK" IS IT POSSIBLE TO UNLOCK P990i USING HWK IF YES HOW?

01-26-2007, 01:11	#10 (permalink)
kishalayabiswas No Life Poster Join Date: Sep 2004 Location: INDIA Posts: 950 Member: 80092 Status: Offline Sonork: 100.1594028 Thanks: 73 Thanked 177 Times in 98 Posts	thx mate.. its all done..sucessfull Mcu_Id: 5B 08 02 01 FF FF FF FF Certificate Accepted Prologue Ok PayLoader Ok Certificated Boot Ok, Time: 00:02 IMEI : 354235-00-258819-6 Ram_Ld: 031003 1530 EANCXC1327525_R1A Fla_Ld: WAKCXC1327507_FLASH_LOADER_B R1A RSA Flags Removed Mcu_Id: 5B 08 02 01 FF FF FF FF Secure Boot Ok, Time: 00:03 Fl_Id : 00898862 Intel 28F320W18T {2} Blk_0 : 3E0000 IMEI : 354235-00-258819-6 ULock : Factory_Off : 0000 NCK : 82110220 NSCK : 70985399 CCK : 80152156 SPCK : 59993314 LockSt: Sim_Locks Open, Mcc+Mnc: FFF-FF, 5555 55 Mcu_Sw: R3E008 prgCXC162042_LAYLA_CERTIFIED BackUp:'P910_354235002588196_1_26_2007_7_51_15_AM. sim' MCU Flash Erased: 1 sector(s), Time: 00:00 MCU Flash Written: 65536 byte(s), Time: 00:01 MCU Flashing Done, Time: 00:03 Flash Recovery Done Using: P910_R3E008_162042_RsaOn.bis OTP IMEI: 30-354235-00-258819-6, Locked Old IMEI: 354235-00-258819-6 "New" Security Area Layout Detected New IMEI: 354235-00-258819-6 GDFS Flash Erased: 1 sector(s), Time: 00:00 GDFS Flash Written: 20480 byte(s), Time: 00:00 GDFS Security Block Init Done, Time: 00:05 w.b.r kishalayabiswas Last edited by kishalayabiswas; 01-26-2007 at 02:27.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
unlock p990i	pistata	KULANKENDI Server	2	07-28-2007 15:28
How Much Credits for Unlocking P990i EPOC	Moderate	Universalbox	2	06-19-2007 15:47
Unlock P990i	The Dog	Cruiser Suite	5	03-25-2007 11:09
Please Tell Me Procedure How To Unlock P990i	saily	Universalbox	0	03-10-2007 12:18
Unlock P990i, Cruiser says it's supported?	laxxe	Cruiser Suite	3	02-24-2007 05:42

01-25-2007, 22:15	#2 (permalink)
Kashif Khan No Life Poster Join Date: Oct 2004 Location: Spain Age: 32 Posts: 3,631 Member: 88016 Status: Offline Thanks: 41 Thanked 262 Times in 152 Posts	Not possible in HWK but you can reset free your user code with setool. BR KAshif khan

01-25-2007, 22:23	#3 (permalink)
kishalayabiswas No Life Poster Join Date: Sep 2004 Location: INDIA Posts: 950 Member: 80092 Status: Offline Sonork: 100.1594028 Thanks: 73 Thanked 177 Times in 98 Posts	UNLOCKING SONY ERICSSON P910i EXPECTING UR ADVICE . PLZ TELL ME HOW I UNLOCK THAT SAID PHONE , LOCKED BY VODAFONE UK I HAV ONLY UFS BOXES steps i followed in ufs :: 1>attaching T 28 data cable 2> connect and selet the model 3> press GO botton ^ put the batter within 5sec 4> after reading 40-45% phone automatically switch on & stop all functions PLZ TELL ME THE PROPER STEPS TO UNLOCK THAT PHONE THX IN ADVANCE KISHALAYABISWAS

01-25-2007, 22:28	#4 (permalink)
Kashif Khan No Life Poster Join Date: Oct 2004 Location: Spain Age: 32 Posts: 3,631 Member: 88016 Status: Offline Thanks: 41 Thanked 262 Times in 152 Posts	How can you connect it with T28 cable?phone jeck is small like k750,and UFS can't do it. If you wanna do it so buy another tool like setool. BR Kashif Khan

01-25-2007, 22:51	#5 (permalink)
kishalayabiswas No Life Poster Join Date: Sep 2004 Location: INDIA Posts: 950 Member: 80092 Status: Offline Sonork: 100.1594028 Thanks: 73 Thanked 177 Times in 98 Posts	sir SE P910i (non hwk model) data port compacatble wish T 28 data cable..plz chek it.. its also working and connecting, but some thing wrong in my steps to unlock SE P910i ... thx for reply

01-26-2007, 00:55	#8 (permalink)
kishalayabiswas No Life Poster Join Date: Sep 2004 Location: INDIA Posts: 950 Member: 80092 Status: Offline Sonork: 100.1594028 Thanks: 73 Thanked 177 Times in 98 Posts	[b]thx mate.. i trying and post my result soon[:b]

01-26-2007, 01:00	#9 (permalink)
kishalayabiswas No Life Poster Join Date: Sep 2004 Location: INDIA Posts: 950 Member: 80092 Status: Offline Sonork: 100.1594028 Thanks: 73 Thanked 177 Times in 98 Posts	before i start unlocking i select mcu : P910_R4A006_162042_RsaOn.bis its correct?

01-29-2007, 05:15	#12 (permalink)
BMobile No Life Poster Join Date: Jun 2005 Location: Computer Age: 31 Posts: 546 Member: 154696 Status: Offline Thanks: 4 Thanked 15 Times in 13 Posts	Can anyone confirm this information ? please !

01-29-2007, 11:15	#13 (permalink)
*stanner_austin* Super Moderator Join Date: Jan 2004 Location: INDIA,Gujarat,Surat Age: 28 Posts: 5,058 Member: 49752 Status: Offline Sonork: 100.112446 Thanks: 104 Thanked 4,009 Times in 597 Posts	in p990i 2 phones base new security base on server.. old security base standalone.. server base need credite

02-02-2007, 23:15	#14 (permalink)
Wings Freak Poster Join Date: Jun 1999 Location: California Age: 39 Posts: 396 Member: 255 Status: Offline Thanks: 0 Thanked 2 Times in 1 Post	Check the date thread started Clowns. BR

02-04-2007, 05:42	#15 (permalink)
shohag No Life Poster Join Date: May 2005 Location: CellcomEngineering Age: 31 Posts: 1,303 Member: 147116 Status: Offline Sonork: 100.1578260 Thanks: 221 Thanked 316 Times in 145 Posts	cruiser can do this 100%%%%%%%%%%%%%%%%