cant unlock VS-1

[kachman]

Hello

I am trying to unlock sagem vs-1

I bought box from ipmart,

I am using cable named SAG 3in1 (SWS-SAG 004)

How do i connect the phone? I soldered the testpoint wire to a random jtag adaptor from the ones that came with box. but the software just says "cant read phone IMEI"

the rj45 cable also has a +voltage cable (positive red crocodile clip cable). am I suppose to connect this positive cable to the battery connector on the phone?

also am I suppose to press the power button on the phone?

please give me some instrustions on how to have this phone detected on box.

I also just see a faint red signal in the Rx LED whic just blinks for half a second.

[Oxo_Boxo]

SWS-SAG cables are INCOMPATIBLE with SagemDD box!!!

Correct cable schematic you can found in support area (Cables_Metal_Box_v1.0.gif and TP_RJ45.jpg)

Read quick user manual Unlocking with Dongle Unlocking Device.pdf
from here http://forum.gsmhosting.com/vbb/f312...4/index15.html


br

Originally Posted by kachman

Hello

I am trying to unlock sagem vs-1

I bought box from ipmart,

I am using cable named SAG 3in1 (SWS-SAG 004)

How do i connect the phone? I soldered the testpoint wire to a random jtag adaptor from the ones that came with box. but the software just says "cant read phone IMEI"

the rj45 cable also has a +voltage cable (positive red crocodile clip cable). am I suppose to connect this positive cable to the battery connector on the phone?

also am I suppose to press the power button on the phone?

please give me some instrustions on how to have this phone detected on box.

I also just see a faint red signal in the Rx LED whic just blinks for half a second.

[kachman]

Originally Posted by Oxo_Boxo

SWS-SAG cables are INCOMPATIBLE with SagemDD box!!!

Correct cable schematic you can found in support area (Cables_Metal_Box_v1.0.gif and TP_RJ45.jpg)

Read quick user manual Unlocking with Dongle Unlocking Device.pdf
from here http://forum.gsmhosting.com/vbb/f312...4/index15.html


br

why do they sell it with box then? (ipmart) Aren't they your reseller? dont you think maybe the box hardware they sell is compatible with the sws cable?

[latigido]

@kachman

Could you check before asking???
SagDD
ipmart is not our reseller, something more, ipmart never was our reseller.

[kachman]

Originally Posted by latigido

@kachman

Could you check before asking???
SagDD
ipmart is not our reseller, something more, ipmart never was our reseller.

could you check before writing???????

this is from the link you gave me

RESELLER

I-Phone Network
Malaysia

Tel.: +6082242424
Fax: +6082420187
ICQ: 1597957
E-mail: [email protected]
Web Page: www.i-phone.org

and something more, click on www.i-phone.org and see where it takes you to

[Oxo_Boxo]

SagemDD JTAG cables are not compatible with third party boxes (SCRD2 and SWS) and that are explained to customrs many times (check section history)

anyway we are sow similar mistakes from other resellers too...

contact with ipmart and fix the problem...

br

Originally Posted by kachman

why do they sell it with box then? (ipmart) Aren't they your reseller? dont you think maybe the box hardware they sell is compatible with the sws cable?

[kachman]

Originally Posted by Oxo_Boxo

SagemDD JTAG cables are not compatible with third party boxes (SCRD2 and SWS) and that are explained to customrs many times (check section history)

anyway we are sow similar mistakes from other resellers too...

contact with ipmart and fix the problem...

br

Hi

well the box hardware is the same one as the one sold by gsmserver.com (please dont tell me they are also not your reseller). is there anyway to modify the SWS cable to work with sagdd box?

if not where can I buy the cables that will work with the box? can you sell me second-hand ones? or do you have new ones as well?

by the way ipmart has stopped selling those boxes so they cant fix my problem

[Oxo_Boxo]

SWS cable modification are possible, correct cable schematic are available in support area.

I hope you can do modification by yourself ....

br

Originally Posted by kachman

Hi

well the box hardware is the same one as the one sold by gsmserver.com (please dont tell me they are also not your reseller). is there anyway to modify the SWS cable to work with sagdd box?

if not where can I buy the cables that will work with the box? can you sell me second-hand ones? or do you have new ones as well?

by the way ipmart has stopped selling those boxes so they cant fix my problem

[kachman]

Originally Posted by Oxo_Boxo

SWS cable modification are possible, correct cable schematic are available in support area.

I hope you can do modification by yourself ....

br

I hope so too, if i fail, can you sell me second hand cables? or new ones if you have?

what about the jigs, they dont have compatibilty problem right?

[kachman]

Originally Posted by Oxo_Boxo

SWS cable modification are possible, correct cable schematic are available in support area.

I hope you can do modification by yourself ....

br

hI, i Checked the cable pinout for sws. the only difference is the one as marked in the attachment.

the only different pinouts are for the rj45 that goes to box, i swapped them to match the one for sagDD. the cables that connect to phone and tp adapter have correct pinouts.

But still I am not able to detect the phone. am I suppose to press the power button on the phone when i press on do job?

[Oxo_Boxo]

Phone must be power on before press do the job...

br

Originally Posted by kachman

hI, i Checked the cable pinout for sws. the only difference is the one as marked in the attachment.

the only different pinouts are for the rj45 that goes to box, i swapped them to match the one for sagDD. the cables that connect to phone and tp adapter have correct pinouts.

But still I am not able to detect the phone. am I suppose to press the power button on the phone when i press on do job?

[kachman]

Originally Posted by Oxo_Boxo

Phone must be power on before press do the job...

br

so i shoult put back the LCD? to check if its on

[kachman]

Originally Posted by Oxo_Boxo

Phone must be power on before press do the job...

br

if i dont want to use teh myx-x cable, where can i solder pinouts on the phone pcb? for sagem vs-1

[Oxo_Boxo]

in most of cases rx and tx are available on PCB TP too
you can found it easy, just check where system connector pins are mapped on board

br

Originally Posted by kachman

if i dont want to use teh myx-x cable, where can i solder pinouts on the phone pcb? for sagem vs-1

[kachman]

Originally Posted by Oxo_Boxo

in most of cases rx and tx are available on PCB TP too
you can found it easy, just check where system connector pins are mapped on board

br

i found them, but software just keeps saying bootloader failed.