sagem my411xi repair solution - GSM-Forum

patric · 07-01-2008, 07:44

I have a sagem my411xi that start and show only ''I'' (imode) and after that nothing in the screen , any solution to repair it
thx

latigido · 07-01-2008, 08:37

@patric

1. Make Phone code timer and Hardware Failure repair (use SagemDD_V8.3 or V7.5 with Phone speed AUTO).
2. If Step1 not works read flash.bin then send it to [email protected].

patric · 07-01-2008, 14:53

for the 1 solution i have always problem:repair not possible !

latigido · 07-01-2008, 15:17

It`s not possible!!!!!
Set Phone speed to AUTO, or better use SagemDD_v8.3.
(For your phone SagemDD_v8.3 defines phone speed automatically )

patric · 07-01-2008, 15:28

i used first usb cable, now i use pinout from dongle but i got problem:failed to read imei !

latigido · 07-01-2008, 15:34

You Must Use Usb Cable!!!!

patric · 07-01-2008, 15:38

Quote:

Originally Posted by latigido

You Must Use Usb Cable!!!!

using usb cable , phone detected but blue bar became 100%
i got a message : repair not possible !

latigido · 07-01-2008, 15:44

@patric
Cable not have relation with this message!

Once again!
Use SagemDD_V8.3, make Phone code counter and Hardware Failure repair together. Don`t make CRC repair, it`s not allowed.

patric · 07-01-2008, 16:03

Quote:

Originally Posted by latigido

@patric
Cable not have relation with this message!

Once again!
Use SagemDD_V8.3, make Phone code counter and Hardware Failure repair together. Don`t make CRC repair, it`s not allowed.

repair completed successfuly
but phone start , show operator logo , and stuck at ! (imode)

latigido · 07-01-2008, 16:30

Now - Step2!!
(Too many post`s after so clearly described recommendations

)

07-01-2008, 07:44	#1 (permalink)
patric No Life Poster Join Date: Jan 2002 Location: tunis,Tunisia Age: 54 Posts: 5,436 Member: 8228 Status: Offline Sonork: 12399830 Thanks Meter: 136	sagem my411xi repair solution I have a sagem my411xi that start and show only ''I'' (imode) and after that nothing in the screen , any solution to repair it thx

07-01-2008, 16:30	#10 (permalink)
latigido No Life Poster Join Date: Feb 2002 Location: Europe Posts: 6,102 Member: 9544 Status: Offline Thanks Meter: 5,533	Now - Step2!! (Too many post`s after so clearly described recommendations)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SAGEM MY411Xi	Ibrahim	ARM9 BASED M62 / M62+	1	05-18-2007 18:53
Sagem M9500 repair solution here !!!!!	bentys2000	Infineon C16X M51 & ARM7 M52 BASED	2	06-24-2004 12:48
SAGEM 939 repair solution needed	NBG	Infineon C16X M51 & ARM7 M52 BASED	0	03-19-2001 23:47

07-01-2008, 08:37	#2 (permalink)
latigido No Life Poster Join Date: Feb 2002 Location: Europe Posts: 6,102 Member: 9544 Status: Offline Thanks Meter: 5,533	@patric 1. Make Phone code timer and Hardware Failure repair (use SagemDD_V8.3 or V7.5 with Phone speed AUTO). 2. If Step1 not works read flash.bin then send it to [email protected].

07-01-2008, 14:53	#3 (permalink)
patric No Life Poster Join Date: Jan 2002 Location: tunis,Tunisia Age: 54 Posts: 5,436 Member: 8228 Status: Offline Sonork: 12399830 Thanks Meter: 136	for the 1 solution i have always problem:repair not possible !

07-01-2008, 15:17	#4 (permalink)
latigido No Life Poster Join Date: Feb 2002 Location: Europe Posts: 6,102 Member: 9544 Status: Offline Thanks Meter: 5,533	It`s not possible!!!!! Set Phone speed to AUTO, or better use SagemDD_v8.3. (For your phone SagemDD_v8.3 defines phone speed automatically )

07-01-2008, 15:28	#5 (permalink)
patric No Life Poster Join Date: Jan 2002 Location: tunis,Tunisia Age: 54 Posts: 5,436 Member: 8228 Status: Offline Sonork: 12399830 Thanks Meter: 136	i used first usb cable, now i use pinout from dongle but i got problem:failed to read imei !

07-01-2008, 15:34	#6 (permalink)
latigido No Life Poster Join Date: Feb 2002 Location: Europe Posts: 6,102 Member: 9544 Status: Offline Thanks Meter: 5,533	You Must Use Usb Cable!!!!

07-01-2008, 15:44	#8 (permalink)
latigido No Life Poster Join Date: Feb 2002 Location: Europe Posts: 6,102 Member: 9544 Status: Offline Thanks Meter: 5,533	@patric Cable not have relation with this message! Once again! Use SagemDD_V8.3, make Phone code counter and Hardware Failure repair together. Don`t make CRC repair, it`s not allowed.