screen blinking - GSM-Forum

safano · 10-04-2009, 19:12

my400v after unlock bleu screen and blinking
i make repair the same problem
please help

Oxo_Boxo · 10-04-2009, 19:20

Not possible .. better explain us real situation...

safano · 10-05-2009, 09:52

read code ok i deconnect phone power it on the screen is bleu and blinking
i have only jtag

Oxo_Boxo · 10-05-2009, 12:01

Quote:

Originally Posted by safano

read code ok i deconnect phone power it on the screen is bleu and blinking
i have only jtag

Did you check phone state before start unlocking ?
Which code phone asking for ?

Did you use fully charged battery ?

br

safano · 10-05-2009, 12:31

before unlock phone write "sim verrou "and batterie full charched

i try with other battery same problem

i think flash with other solution or by server resolve my problem

what do u say?

thinks

latigido · 10-05-2009, 13:01

@safano
What cable you have used?
If you soldered wires, check pcb and clean carefully it.

safano · 10-05-2009, 17:51

normal cable used for may time and no problem

thinks

latigido · 10-05-2009, 18:00

@safano
All cables on the market are normal!!!!!
What cable you have used?
Did you solder wires to Tx and Rx?
No way to damage Sagem phone during unlocking!
SagemDD read some data from flash, no flashing, no flashing, no changes in FW.
BTW, read Flash.bin, then upload it to RAPIDSHARE.
We will analize it.

safano · 10-05-2009, 20:17

yes i use myc-2 cable delivred with universal box since 2005

this the flash file link and excuse to loose ur time

thinks

http://rapidshare.com/files/28908990...416-4.rar.html

delchoni · 10-08-2009, 20:01

not posoible only make unlock and unlock operation to damage phone- still bleu screen and blinking

chek phone hardweare ..then
reflash phone..

br.

10-04-2009, 19:12	#1 (permalink)
safano No Life Poster Join Date: Apr 2004 Location: TUNISIA Posts: 567 Member: 62174 Status: Offline Thanks Meter: 71	screen blinking my400v after unlock bleu screen and blinking i make repair the same problem please help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
w810i sonyerixon logo blinking & then white screen blinking	cellindia1	Sony Ericsson Hardware Repair	4	07-02-2007 05:06
V3 screen blinking afer flash	Nasmi	Smart-Clip	3	01-07-2006 19:25
a800 main screen blink for 3 times and then fno stays off	wizwiz	VLSI, Conexant, Skyworks and Old Models	5	02-13-2005 15:44
screen blinking	bestwish	Motorola P2k	2	06-02-2004 09:45
A300 screen blinks once, no power up???	reo	VLSI, Conexant, Skyworks and Old Models	0	03-08-2003 09:56

10-04-2009, 19:20	#2 (permalink)
Oxo_Boxo No Life Poster Join Date: Jun 2002 Location: East Europe Age: 51 Posts: 3,950 Member: 12837 Status: Offline Thanks Meter: 2,740	Not possible .. better explain us real situation...

10-05-2009, 09:52	#3 (permalink)
safano No Life Poster Join Date: Apr 2004 Location: TUNISIA Posts: 567 Member: 62174 Status: Offline Thanks Meter: 71	read code ok i deconnect phone power it on the screen is bleu and blinking i have only jtag

10-05-2009, 12:31	#5 (permalink)
safano No Life Poster Join Date: Apr 2004 Location: TUNISIA Posts: 567 Member: 62174 Status: Offline Thanks Meter: 71	before unlock phone write "sim verrou "and batterie full charched i try with other battery same problem i think flash with other solution or by server resolve my problem what do u say? thinks

10-05-2009, 13:01	#6 (permalink)
latigido No Life Poster Join Date: Feb 2002 Location: Europe Posts: 6,102 Member: 9544 Status: Offline Thanks Meter: 5,533	@safano What cable you have used? If you soldered wires, check pcb and clean carefully it.

10-05-2009, 17:51	#7 (permalink)
safano No Life Poster Join Date: Apr 2004 Location: TUNISIA Posts: 567 Member: 62174 Status: Offline Thanks Meter: 71	normal cable used for may time and no problem thinks

10-05-2009, 18:00	#8 (permalink)
latigido No Life Poster Join Date: Feb 2002 Location: Europe Posts: 6,102 Member: 9544 Status: Offline Thanks Meter: 5,533	@safano All cables on the market are normal!!!!! What cable you have used? Did you solder wires to Tx and Rx? No way to damage Sagem phone during unlocking! SagemDD read some data from flash, no flashing, no flashing, no changes in FW. BTW, read Flash.bin, then upload it to RAPIDSHARE. We will analize it.

10-05-2009, 20:17	#9 (permalink)
safano No Life Poster Join Date: Apr 2004 Location: TUNISIA Posts: 567 Member: 62174 Status: Offline Thanks Meter: 71	yes i use myc-2 cable delivred with universal box since 2005 this the flash file link and excuse to loose ur time thinks http://rapidshare.com/files/28908990...416-4.rar.html

10-08-2009, 20:01	#10 (permalink)
delchoni No Life Poster Join Date: Mar 2006 Location: Bulgaria Asenovgrad Age: 42 Posts: 3,197 Member: 239176 Status: Offline Sonork: 100.1602815 Thanks Meter: 851	not posoible only make unlock and unlock operation to damage phone- still bleu screen and blinking chek phone hardweare ..then reflash phone.. br.