Test Point broken - solution here! - GSM-Forum

electrosoft · 11-01-2005, 23:19

Hi i have sagem my x5-2 test point 2 is cleared any solution plz

latigido · 11-01-2005, 23:46

@electrosoft
Use so called needles method!
Solder needle to wire for broken TP, solder wires to others 3 TP.
Press top of the needle to brocken TP(near centre) and try to unlock phone.
If you are lucky you will get codes after first try, if no - after more than 20 tryes!

Advisable, insulate needle from fingers!

electrosoft · 11-02-2005, 00:07

thank you latigido you are the best

gsm99 · 11-02-2005, 20:20

Ther's any picture plz
I needed urgently
thks

BouRRi_GSM · 11-02-2005, 21:38

Thanks latigido

it's good trick

I test it
Thanks bro

gsm99 · 11-03-2005, 21:31

Quote:

Originally Posted by latigido

@electrosoft
Use so called needles method!
Solder needle to wire for broken TP, solder wires to others 3 TP.
Press top of the needle to brocken TP(near centre) and try to unlock phone.
If you are lucky you will get codes after first try, if no - after more than 20 tryes!

Advisable, insulate needle from fingers!

Thanks Mr. latigido;
Can you explane more becose I'v not understand your solution.
the TP broken in PCB :
°........°.......°
.......................° <------------ This point is broken
PLZ
THKS

ceedee · 11-05-2005, 19:49

if you don't want to use needles it's much easier to use soft pencil (8B will be the best) after using pencil simply use testpoint adapter. I tested it many times and works perfectly.

electrosoft · 11-05-2005, 21:19

any link for soft pencil explain more plz

XARiUS · 11-05-2005, 21:23

Quote:

Originally Posted by electrosoft

any link for soft pencil explain more plz

I think he is not talking about a software, but an ordinary pencil, since graphite is a good conductor of electricity.

Best Regards
XARiUS

electrosoft · 11-05-2005, 21:33

thanks XARiUS it's good trick

ceedee · 11-06-2005, 18:33

Quote:

Originally Posted by XARiUS

I think he is not talking about a software, but an ordinary pencil, since graphite is a good conductor of electricity.
Best Regards
XARiUS

exactly, it's ordinary pencil but it has to be as soft as possible - I told 8B because softness avoids damaging pcb and it has more graphite than ordinary HB school pencil, I think it's easy to imagine if you didn't sleep at chemistry and physics lesson in school ;] you can also use glue sets for fixing rear glass warming system, it has silver instead...

latigido · 11-06-2005, 20:06

I reccomend soft (not software) pencil solution too!
Off course if you have TP adapter!

If not , use needles solution! Work perfect after some experience!

ceedee · 11-06-2005, 20:45

Quote:

Originally Posted by latigido

I reccomend soft (not software) pencil solution too!
Off course if you have TP adapter!

If not , use needles solution! Work perfect after some experience!

or simply eagle eye and non shakin' hands

i_seeque · 11-15-2005, 17:20

OR if one can do some R&D and show us the ways of TP.
I ve tried needle solution with myx1w and it had worked perfectly.
BUT other phones were not quite successful even after 20 tries.
The revealation leads towards cpu. If schematics are available for such sagem phones, it would be a great help for all of us.
BR

latigido · 11-15-2005, 18:22

@i_seeque
Sagem schemes are not available!
But schemes can`t help you for resolving described problem.

11-01-2005, 23:19	#1 (permalink)
electrosoft Freak Poster Join Date: Nov 2004 Location: Tunisia Age: 43 Posts: 388 Member: 93850 Status: Offline Thanks Meter: 48	Test Point broken - solution here! Hi i have sagem my x5-2 test point 2 is cleared any solution plz

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
g1157 Test Point broken	ejazakbar905	FuriousGold	0	03-26-2010 13:51
myx1w test point broken	GSM RAJ	Sagem Hardware Repair Area	3	01-31-2006 06:22
A-50 Test Point Broken Help !!!!	amitks_in	Siemens Hardware Repair Area	3	04-28-2005 22:02

11-01-2005, 23:46	#2 (permalink)
latigido No Life Poster Join Date: Feb 2002 Location: Europe Posts: 6,102 Member: 9544 Status: Offline Thanks Meter: 5,533	@electrosoft Use so called needles method! Solder needle to wire for broken TP, solder wires to others 3 TP. Press top of the needle to brocken TP(near centre) and try to unlock phone. If you are lucky you will get codes after first try, if no - after more than 20 tryes! Advisable, insulate needle from fingers!

11-02-2005, 00:07	#3 (permalink)
electrosoft Freak Poster Join Date: Nov 2004 Location: Tunisia Age: 43 Posts: 388 Member: 93850 Status: Offline Thanks Meter: 48	thank you latigido you are the best

11-02-2005, 20:20	#4 (permalink)
gsm99 No Life Poster Join Date: Jan 2005 Location: Tunisia Sidi Bouzid Posts: 1,113 Member: 104737 Status: Offline Thanks Meter: 76	Ther's any picture plz I needed urgently thks

11-02-2005, 21:38	#5 (permalink)
BouRRi_GSM Registered User Join Date: Jan 2005 Location: TuNiSiA Age: 43 Posts: 4,342 Member: 111457 Status: Offline Thanks Meter: 967	Thanks latigido it's good trick I test it Thanks bro

11-05-2005, 19:49	#7 (permalink)
ceedee No Life Poster Join Date: Jul 2001 Location: PL Age: 41 Posts: 656 Member: 5268 Status: Offline Thanks Meter: 24	if you don't want to use needles it's much easier to use soft pencil (8B will be the best) after using pencil simply use testpoint adapter. I tested it many times and works perfectly.

11-05-2005, 21:19	#8 (permalink)
electrosoft Freak Poster Join Date: Nov 2004 Location: Tunisia Age: 43 Posts: 388 Member: 93850 Status: Offline Thanks Meter: 48	any link for soft pencil explain more plz

11-05-2005, 21:33	#10 (permalink)
electrosoft Freak Poster Join Date: Nov 2004 Location: Tunisia Age: 43 Posts: 388 Member: 93850 Status: Offline Thanks Meter: 48	thanks XARiUS it's good trick

11-06-2005, 20:06	#12 (permalink)
latigido No Life Poster Join Date: Feb 2002 Location: Europe Posts: 6,102 Member: 9544 Status: Offline Thanks Meter: 5,533	I reccomend soft (not software) pencil solution too! Off course if you have TP adapter! If not , use needles solution! Work perfect after some experience!

11-15-2005, 17:20	#14 (permalink)
i_seeque No Life Poster Join Date: Sep 2002 Location: India Posts: 786 Member: 15238 Status: Offline Thanks Meter: 128	OR if one can do some R&D and show us the ways of TP. I ve tried needle solution with myx1w and it had worked perfectly. BUT other phones were not quite successful even after 20 tries. The revealation leads towards cpu. If schematics are available for such sagem phones, it would be a great help for all of us. BR

11-15-2005, 18:22	#15 (permalink)
latigido No Life Poster Join Date: Feb 2002 Location: Europe Posts: 6,102 Member: 9544 Status: Offline Thanks Meter: 5,533	@i_seeque Sagem schemes are not available! But schemes can`t help you for resolving described problem.