After upgrade BF4 nothing on LCD and no light??? - GSM-Forum

NSerN · 03-05-2003, 20:40

Need help!
After upgrade with Wray 5.5 BF-4 from ver. 10E-KI12A to ver.10R-KI52H or 10R-KI52H result phone work but nothing on LCD and no back light?

why? And what can I do to solve this problem?

Thanks!!!

emilio · 03-05-2003, 21:01

may be difference in hardware version

NSerN · 03-06-2003, 07:17

The best result in my experiment with various flash it's upgrade to 10R_KI52L all work and LCD too, but no back light!!!

What ver I mast use?

emilio · 03-06-2003, 09:33

aktivate in menu

NSerN · 03-06-2003, 09:37

@ emilio

I'm did it before wrote in forum - not WORK!!!

Wray · 03-06-2003, 12:48

Hi,

don't use Patch Firmware to restore the old TEH. Use Restores instead.

NSerN · 03-06-2003, 15:46

Big thanks Wray for you reply, but it's realy interesting problem.
What I did:
1. Make Backup.
2. Write Full flash.
3. Use Resrores and then change IMEI (last digit).
4. Power ON.
Phone work:
with ver 10R-KI52H or 10R-KI52H result phone work but nothing on LCD and no backlight?
with ver 10R_KI52L only no backlight.

In what I am not right?

Wray · 03-06-2003, 16:47

Hi,

for phones with original firmware before 52H to change to a firmware also before 52H works Restores and Patch Firmware.

for phones with original firmware before 52H to change to a 52H firmware you have to use only Patch Firmware. With Restores you'll get a working phone with LCD but no lights.

for phones with original firmware 52H to change to a firmware before 52H works Restores.

for phones with original firmware 52L, you have to use ONLY 52L firmware and Patch Firmware. This maybe be valid for some 52K too.

NSerN · 03-06-2003, 18:06

Big thanks to WRAY!!!

Problem solved, phone work fine!

pik2020 · 03-14-2003, 00:12

I have 10R-KI52K Thomson4Mb (only good TEH ZONE)

After upgrade with 10R-LI52L nothing on LCD only LIGHT.

How repair this?
What version I can use?
Where I can find this full flash?

thanx
pik2020

NSerN · 03-14-2003, 07:33

For me If I'm press Restore - result nothing on LCD
If I'm press PatchFirmware - all OK!
But this solution not work always with ver 10R-LI52L sometimes result very low contrast and I can't change it in phone menu. BF4_10R_KI52L_1AALRU1 - flash with russian input but it not work on all phones.

WRAY wrote: "for phones with original firmware 52L, you have to use ONLY 52L firmware and Patch Firmware"

pik2020 · 03-14-2003, 11:42

@ NSerN

If can, send me please this flash BF4_10R_KI52L_1AALRU1

than you
[email protected]

03-05-2003, 20:40	#1 (permalink)
NSerN No Life Poster Join Date: Jan 2002 Location: Russia Posts: 704 Member: 8599 Status: Offline Thanks Meter: 3	After upgrade BF4 nothing on LCD and no light??? Need help! After upgrade with Wray 5.5 BF-4 from ver. 10E-KI12A to ver.10R-KI52H or 10R-KI52H result phone work but nothing on LCD and no back light? why? And what can I do to solve this problem? Thanks!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
E90 N1100 bad Hall switch for Lid and black lcd and no light external	Pandemonio100	Nokia Hardware & Hardware Repair	6	12-21-2011 17:52
6070 no disalpy on lcd and no light on keypad	ameho0102	Nokia Hardware & Hardware Repair	7	11-12-2009 09:09
w350i no lcd and no light plz help me.	asif_ae	Sony Ericsson Hardware Repair	5	10-24-2009 11:03
have V3X no light on LCD and no dISPLAY	Mang mel	Motorola Hardware Repair	2	01-10-2009 14:16
Nokia 6600 no lights on lcd and no lights on key's	floky	Nokia Hardware & Hardware Repair	2	02-17-2005 15:01

03-05-2003, 21:01	#2 (permalink)
emilio No Life Poster Join Date: Oct 2002 Location: Bulgaria, sliven Age: 46 Posts: 615 Member: 16798 Status: Offline Thanks Meter: 3	may be difference in hardware version

03-06-2003, 07:17	#3 (permalink)
NSerN No Life Poster Join Date: Jan 2002 Location: Russia Posts: 704 Member: 8599 Status: Offline Thanks Meter: 3	The best result in my experiment with various flash it's upgrade to 10R_KI52L all work and LCD too, but no back light!!! What ver I mast use?

03-06-2003, 09:33	#4 (permalink)
emilio No Life Poster Join Date: Oct 2002 Location: Bulgaria, sliven Age: 46 Posts: 615 Member: 16798 Status: Offline Thanks Meter: 3	aktivate in menu

03-06-2003, 09:37	#5 (permalink)
NSerN No Life Poster Join Date: Jan 2002 Location: Russia Posts: 704 Member: 8599 Status: Offline Thanks Meter: 3	@ emilio I'm did it before wrote in forum - not WORK!!!

03-06-2003, 12:48	#6 (permalink)
Wray Freak Poster Join Date: Jun 2002 Location: Romania Posts: 396 Member: 13153 Status: Offline Thanks Meter: 0	Hi, don't use Patch Firmware to restore the old TEH. Use Restores instead.

03-06-2003, 15:46	#7 (permalink)
NSerN No Life Poster Join Date: Jan 2002 Location: Russia Posts: 704 Member: 8599 Status: Offline Thanks Meter: 3	Big thanks Wray for you reply, but it's realy interesting problem. What I did: 1. Make Backup. 2. Write Full flash. 3. Use Resrores and then change IMEI (last digit). 4. Power ON. Phone work: with ver 10R-KI52H or 10R-KI52H result phone work but nothing on LCD and no backlight? with ver 10R_KI52L only no backlight. In what I am not right?

03-06-2003, 16:47	#8 (permalink)
Wray Freak Poster Join Date: Jun 2002 Location: Romania Posts: 396 Member: 13153 Status: Offline Thanks Meter: 0	Hi, for phones with original firmware before 52H to change to a firmware also before 52H works Restores and Patch Firmware. for phones with original firmware before 52H to change to a 52H firmware you have to use only Patch Firmware. With Restores you'll get a working phone with LCD but no lights. for phones with original firmware 52H to change to a firmware before 52H works Restores. for phones with original firmware 52L, you have to use ONLY 52L firmware and Patch Firmware. This maybe be valid for some 52K too.

03-06-2003, 18:06	#9 (permalink)
NSerN No Life Poster Join Date: Jan 2002 Location: Russia Posts: 704 Member: 8599 Status: Offline Thanks Meter: 3	Big thanks to WRAY!!! Problem solved, phone work fine!

03-14-2003, 00:12	#10 (permalink)
pik2020 Insane Poster Join Date: Oct 2002 Posts: 68 Member: 17112 Status: Offline Thanks Meter: 0	I have 10R-KI52K Thomson4Mb (only good TEH ZONE) After upgrade with 10R-LI52L nothing on LCD only LIGHT. How repair this? What version I can use? Where I can find this full flash? thanx pik2020

03-14-2003, 07:33	#11 (permalink)
NSerN No Life Poster Join Date: Jan 2002 Location: Russia Posts: 704 Member: 8599 Status: Offline Thanks Meter: 3	For me If I'm press Restore - result nothing on LCD If I'm press PatchFirmware - all OK! But this solution not work always with ver 10R-LI52L sometimes result very low contrast and I can't change it in phone menu. BF4_10R_KI52L_1AALRU1 - flash with russian input but it not work on all phones. WRAY wrote: "for phones with original firmware 52L, you have to use ONLY 52L firmware and Patch Firmware"

03-14-2003, 11:42	#12 (permalink)
pik2020 Insane Poster Join Date: Oct 2002 Posts: 68 Member: 17112 Status: Offline Thanks Meter: 0	@ NSerN If can, send me please this flash BF4_10R_KI52L_1AALRU1 than you [email protected]