BF4 10C KI125111 eeprom with TEH zone needed! - GSM-Forum

BufferMess · 12-26-2002, 15:35

Hi

I got this phone today, completely dead. I readed all flash with Henrich soft. It says "03FE00 Eeprom block corrupted" at the end. I think , it is a TEH zone that is erased in this phone.

I decided to carry out some experiments and wrote full flash from BF4 10B KI11SIC1. TEH zone was also written without problems but when I power on phone it does not. Also, Henrich again report "03FE00 Eeprom block corrupted" after powering on.

I heard that when writing non-native TEH zone to a phone, it detects it on powering up and erases it. Is it true? Please, help...

Thanks
Sean

DELOK · 12-26-2002, 17:04

Hi!

Yes, its true

Store this phone in cool dry place for the better time

Best regards

XenKo78 · 12-26-2002, 18:41

u're phone is killed and will never revive (it can but without detect simcard if u use patched flash)
only way for u is to send it to ALCATEL SERVICE
TECHZONES ARE NOT CLONABLES!

BR

BufferMess · 12-27-2002, 08:54

Hi people

So if TEH zone is definitely non-clonable, why Henrich Tool has an option for cloning it? Is it just for reviving phone, or completely new approach that 100% works? Or it is not working at all?

Thanks
Sean

balu_dark · 12-27-2002, 19:54

Henrich Tool save TEH Zone in memory and ufter flashing put it back

12-26-2002, 15:35	#1 (permalink)
BufferMess No Life Poster Join Date: Mar 2002 Location: Karabakh - Azeris motherland Age: 45 Posts: 816 Member: 9856 Status: Offline Thanks Meter: 2	BF4 10C KI125111 eeprom with TEH zone needed! Hi I got this phone today, completely dead. I readed all flash with Henrich soft. It says "03FE00 Eeprom block corrupted" at the end. I think , it is a TEH zone that is erased in this phone. I decided to carry out some experiments and wrote full flash from BF4 10B KI11SIC1. TEH zone was also written without problems but when I power on phone it does not. Also, Henrich again report "03FE00 Eeprom block corrupted" after powering on. I heard that when writing non-native TEH zone to a phone, it detects it on powering up and erases it. Is it true? Please, help... Thanks Sean

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
*** teh. zone need	radu_m	BF, BG, TH, BHx Series	2	09-26-2006 16:02
i got a 311 with teh zone in it but imei at back is not same inside	GOODNESS	BF, BG, TH, BHx Series	2	03-20-2005 18:34
OT735 killed by lurker after update with teh zone &fullflash backup!!!????	KISHOMETO	Wray´s Products	7	11-12-2004 10:28
bf4 teh zone	juja	BF, BG, TH, BHx Series	3	04-18-2003 08:16
Repair check sim with sim in bf4 10c KI125111	gilsie	BF, BG, TH, BHx Series	2	01-15-2003 20:07

12-26-2002, 17:04	#2 (permalink)
DELOK No Life Poster Join Date: Dec 2002 Location: Ukraine Age: 46 Posts: 768 Member: 18606 Status: Offline Thanks Meter: 560	Hi! Yes, its true Store this phone in cool dry place for the better time Best regards

12-26-2002, 18:41	#3 (permalink)
XenKo78 No Life Poster Join Date: Mar 2002 Location: Guadeloupe Age: 50 Posts: 531 Member: 9955 Status: Offline Thanks Meter: 7	u're phone is killed and will never revive (it can but without detect simcard if u use patched flash) only way for u is to send it to ALCATEL SERVICE TECHZONES ARE NOT CLONABLES! BR

12-27-2002, 08:54	#4 (permalink)
BufferMess No Life Poster Join Date: Mar 2002 Location: Karabakh - Azeris motherland Age: 45 Posts: 816 Member: 9856 Status: Offline Thanks Meter: 2	Hi people So if TEH zone is definitely non-clonable, why Henrich Tool has an option for cloning it? Is it just for reviving phone, or completely new approach that 100% works? Or it is not working at all? Thanks Sean

12-27-2002, 19:54	#5 (permalink)
balu_dark No Life Poster Join Date: Oct 2002 Location: Ukraine,Simferopol Age: 48 Posts: 1,155 Member: 16251 Status: Offline Thanks Meter: 38	Henrich Tool save TEH Zone in memory and ufter flashing put it back