Alcatal PIXI4 (4) 4034x Firmware Needed - Page 3 - GSM-Forum

powert360 · 11-26-2017, 14:37

my screen not view in vfd 300!

kam187 · 12-18-2017, 21:55

I have the same DRAM error. Anyone have flash for 4034X-2AOBGB2 ?

kam187 · 12-18-2017, 22:13

Hmm ok so I flashed a UK O2 model 4034X-2AOBGB2 with the 4034X-2XALGB1 rom in this thread (including preloader).

Now the phone doesn't boot and I can't flash anything else to it. always the same DRAM error 4032.

Format, update etc all don't work. Same SP flash tools version as the other poster. The repair flash has a bad scatter but even with a fixed one it won't start to flash anything.

**** merged post

I flashed the wrong preloader to my 4034X (O2 GB2) and now it won't flash anything. I got hold of a new one and can use 'read back' in sp tool to read the preloader out of it.

But droid tools doesn't work to create the scatter file, and neither does it convert the read back bin file (because it doesn't know the scatter).

How can I copy the preloader from the working phone to the dead one? (Using another rom from the internet doesn't work and gives me DRAM error).

bcatlock1 · 12-19-2017, 18:47

try using this scatter,.its the 1 i used..

with this firmware
ot-4034X-2XALGB1_Original_SPFT_ROM_by_bRkA.7z

i can givve u link if u waant tothhe firmware,but scatter is attahed

kam187 · 12-20-2017, 09:20

I tried that scatter file and flash but that’s what killed the first phone.

On the second phone I flashed it without preloader and it works fine.

Now I need to fix the first phone. I read the Preloader from the working phone using sp flash tool and looked at the file produced, the preloader is longer than the length in all these scatter files.

The new file has a different format (a file header) too. I tried to manually remove it but sp flash tool still won’t accept the file.

I either need a full backup from a GB2 phone or a way to read it back from my working phone.

I managed to strip out the container from the preloader i read from the working phone and flash it back to the dead one, and everything works now

I was initially getting a DRAM error because the preloader in the flash files on the net are different from the one required for this phone.

Hmm now a different issue. I got 3 new phones, and when i flash the same recovery to them it fails to boot. I think the oem lock is still set and won't unlock.

so i urgently need to find 4034X-2AOBGB2 firmware, or any way to back it up from a working phone.

It seems no custom recovery will boot on this phone, so I wonder if the oem lock is still on. I tried to unlock it again and again but I think this new rom is not doing it properly.

1) I flashed Twrp recovery, it fails to boot into it (it tries then restarts the phone into normal mode)
2) I ran the alcatel upgrade tool to upgrade it. It restore the recovery although it says 4034D instead of 4034X now.
3) I tried to unlock the bootloader - it succeeds, returns to fastboot and is stuck there (as the first phone). I reboot and it boot loops showing android green robot then reboot.
4a) I tried to flash twrp, still same issue won't boot.
4b) I repeated 1 to 3 but this time I tried to fastboot boot the recovery - same issue
4c) I repeated 1, 2, and tried to flash and boot the recovery - same issue.

Any idea what's going on here? I just picked up 2 more phones, and they both do the same thing :/

**Brka** · 12-21-2017, 22:55

Looks like bootchain cheks are now implemented into new software / android version.

However, since you now have working rom, you can try some of custom recoveries
(ctr v6.6, twrp 3.0.2, 3.1.0).

Download full pack - HERE

Flash it normally with SPFT. Reboot immediately into recovery, after flashing.

b.r.
ALex

**Brka** · 12-23-2017, 00:31

... and in case you need repair files (boot, preloader, recovery, etc.),
to fix bricked phone(s), here are original stock files :

Download - OBGB2_4034X_DL5

b.r.
Alex

/FAISAL/ · 03-04-2018, 07:24

I need firmware for alcatel 4034x.

Info on back sticker.
4034x
4034x-2AMWIE1

Thanks.

shehryar khan · 04-02-2018, 11:33

Quote:

Originally Posted by shahzaadbutt

Sorry Model In Title i wrote wrong, its 4034x not 4043x

Alcatal PIXI4 (4) 4034x Firmware Needed

PID: 4034x-2GTWGB1

thanx

.

Alcatel 4034x ROM

ROM PID: 4034X-2AWNIT1 (Wind Italy branded)

cezarpatrulescu · 05-13-2018, 17:36

Hi I need a firmware for 4034X-2AOBGB2... Can anyone help me? My phone is bricked because I flashed a wrong preloader...

**Brka** · 05-15-2018, 02:57

Quote:

Originally Posted by cezarpatrulescu

Hi I need a firmware for 4034X-2AOBGB2... Can anyone help me? My phone is bricked because I flashed a wrong preloader...

Hi,

OBGB2 preloader is missing from OTA server.

However, you can try preloader from 4034X-2xALGB1

attached to this post ...

b.r.
ALex

cezarpatrulescu · 05-15-2018, 10:45

Thanks a lot for your help!

Now my phone is alive again!

Mreck · 06-07-2018, 14:19

Quote:

Originally Posted by Brka

Hi,

OBGB2 preloader is missing from OTA server.

However, you can try preloader from 4034X-2xALGB1

attached to this post ...

b.r.
ALex

Thanks a lot bro, my phone is alive now

mmtheo · 06-17-2018, 10:37

Please which ot4034 version can be flashed into VFD 300? I have tried all files that work with vfd300 but it wont boot up, only on round ball, so i want to convert it to retail version, please help

Dimon_daemon · 07-20-2018, 11:56

Please, need 4034D-2AALRUA firmware. When flash any firmware for 4034D, got blank display. Need exactly 2AALRUA version.
Thanks.

12-18-2017, 22:13	#33 (permalink)
kam187 Junior Member Join Date: Dec 2004 Age: 58 Posts: 17 Member: 97797 Status: Offline Thanks Meter: 0	Hmm ok so I flashed a UK O2 model 4034X-2AOBGB2 with the 4034X-2XALGB1 rom in this thread (including preloader). Now the phone doesn't boot and I can't flash anything else to it. always the same DRAM error 4032. Format, update etc all don't work. Same SP flash tools version as the other poster. The repair flash has a bad scatter but even with a fixed one it won't start to flash anything. **** merged post I flashed the wrong preloader to my 4034X (O2 GB2) and now it won't flash anything. I got hold of a new one and can use 'read back' in sp tool to read the preloader out of it. But droid tools doesn't work to create the scatter file, and neither does it convert the read back bin file (because it doesn't know the scatter). How can I copy the preloader from the working phone to the dead one? (Using another rom from the internet doesn't work and gives me DRAM error). Last edited by Brka; 12-19-2017 at 21:27. Reason: merged

12-20-2017, 09:20	#35 (permalink)
kam187 Junior Member Join Date: Dec 2004 Age: 58 Posts: 17 Member: 97797 Status: Offline Thanks Meter: 0	I tried that scatter file and flash but that’s what killed the first phone. On the second phone I flashed it without preloader and it works fine. Now I need to fix the first phone. I read the Preloader from the working phone using sp flash tool and looked at the file produced, the preloader is longer than the length in all these scatter files. The new file has a different format (a file header) too. I tried to manually remove it but sp flash tool still won’t accept the file. I either need a full backup from a GB2 phone or a way to read it back from my working phone. I managed to strip out the container from the preloader i read from the working phone and flash it back to the dead one, and everything works now I was initially getting a DRAM error because the preloader in the flash files on the net are different from the one required for this phone. Hmm now a different issue. I got 3 new phones, and when i flash the same recovery to them it fails to boot. I think the oem lock is still set and won't unlock. so i urgently need to find 4034X-2AOBGB2 firmware, or any way to back it up from a working phone. It seems no custom recovery will boot on this phone, so I wonder if the oem lock is still on. I tried to unlock it again and again but I think this new rom is not doing it properly. 1) I flashed Twrp recovery, it fails to boot into it (it tries then restarts the phone into normal mode) 2) I ran the alcatel upgrade tool to upgrade it. It restore the recovery although it says 4034D instead of 4034X now. 3) I tried to unlock the bootloader - it succeeds, returns to fastboot and is stuck there (as the first phone). I reboot and it boot loops showing android green robot then reboot. 4a) I tried to flash twrp, still same issue won't boot. 4b) I repeated 1 to 3 but this time I tried to fastboot boot the recovery - same issue 4c) I repeated 1, 2, and tried to flash and boot the recovery - same issue. Any idea what's going on here? I just picked up 2 more phones, and they both do the same thing :/ Last edited by Brka; 12-21-2017 at 22:27. Reason: merged multiple posts

12-21-2017, 22:55	#36 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,206 Member: 163 Status: Offline Thanks Meter: 7,785	Looks like bootchain cheks are now implemented into new software / android version. However, since you now have working rom, you can try some of custom recoveries (ctr v6.6, twrp 3.0.2, 3.1.0). Download full pack - HERE Flash it normally with SPFT. Reboot immediately into recovery, after flashing. b.r. ALex __________________ Always press THANKS button if my post was helpful! Please DO NOT send me PM's for help, You can ask for help on forum Do not post THANKS posts - use thanks button ! ALWAYS use SEARCH button before posting!

12-23-2017, 00:31	#37 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,206 Member: 163 Status: Offline Thanks Meter: 7,785	... and in case you need repair files (boot, preloader, recovery, etc.), to fix bricked phone(s), here are original stock files : Download - OBGB2_4034X_DL5 b.r. Alex __________________ Always press THANKS button if my post was helpful! Please DO NOT send me PM's for help, You can ask for help on forum Do not post THANKS posts - use thanks button ! ALWAYS use SEARCH button before posting!

03-04-2018, 07:24	#38 (permalink)
/FAISAL/ No Life Poster Join Date: May 2008 Location: ...::::GUJRAT::::... Posts: 618 Member: 781860 Status: Offline Thanks Meter: 203	Need Firmware for alcatel 4034x. I need firmware for alcatel 4034x. Info on back sticker. 4034x 4034x-2AMWIE1 Thanks.

11-26-2017, 14:37	#31 (permalink)
powert360 Junior Member Join Date: Nov 2017 Posts: 1 Member: 2782795 Status: Offline Thanks Meter: 0	my screen not view in vfd 300!

12-18-2017, 21:55	#32 (permalink)
kam187 Junior Member Join Date: Dec 2004 Age: 58 Posts: 17 Member: 97797 Status: Offline Thanks Meter: 0	I have the same DRAM error. Anyone have flash for 4034X-2AOBGB2 ?

05-13-2018, 17:36	#40 (permalink)
cezarpatrulescu Junior Member Join Date: May 2018 Posts: 2 Member: 2834304 Status: Offline Thanks Meter: 1	Hi I need a firmware for 4034X-2AOBGB2... Can anyone help me? My phone is bricked because I flashed a wrong preloader...

05-15-2018, 10:45	#42 (permalink)
cezarpatrulescu Junior Member Join Date: May 2018 Posts: 2 Member: 2834304 Status: Offline Thanks Meter: 1	Thanks a lot for your help! Now my phone is alive again!

06-17-2018, 10:37	#44 (permalink)
mmtheo No Life Poster Join Date: Jul 2016 Location: Africa Posts: 837 Member: 2601900 Status: Offline Thanks Meter: 519	Please which ot4034 version can be flashed into VFD 300? I have tried all files that work with vfd300 but it wont boot up, only on round ball, so i want to convert it to retail version, please help

07-20-2018, 11:56	#45 (permalink)
Dimon_daemon Freak Poster Join Date: Feb 2006 Location: Ukraine Age: 41 Posts: 198 Member: 235906 Status: Offline Thanks Meter: 53	Please, need 4034D-2AALRUA firmware. When flash any firmware for 4034D, got blank display. Need exactly 2AALRUA version. Thanks.