Alcatel 5036A / 5036X / 5036D ROM

[Cell-Manager]

***** EDIT : Link expired. Only TWRP backup available (5036A) - HERE

[hyber_99]

Hi to all, have a nice day.
can you help me with rom stock for alcatel 5036a PID - 5036a-2CUFMX1?

i have tried with this rom: ALCATEL ONE TOUCH 5036A_141015_110328.rar

but it´s on alcatel bootloop.

thanks in advance.

[Brka]

Originally Posted by hyber_99

Hi to all, have a nice day.
can you help me with rom stock for alcatel 5036a PID - 5036a-2CUFMX1?

i have tried with this rom: ALCATEL ONE TOUCH 5036A_141015_110328.rar

but it´s on alcatel bootloop.

thanks in advance.

First Question: Did you try to enter recovery (hold volume up + press power on 5 secs, then release power, but hold vol. up) ?
If not, firt do that, and make Wipe Cache / Data, then reboot phone,
and see if it power on.

Second Question: Did you flash all files ? In archive, there is ALL needed to revive DEAD phone.
Download attached scatter file, and put into folder where you unpacked that rom,
open scatter (attached one) in SPFT, ALL files should be checked (marked, ticked),
and Flash phone.
Should power on after that (make reset from recovery also).

post results.

b.r.
Alex

[hyber_99]

finally phone is alive.
your scatter file is correct for flash 5036a

thank you so much.

[walskie]

is this tested file??? i have 5036a bootloop i tried so many file but it still hang in logo

[Brka]

ROM is tested, and working, but provided scatter is wrong.
Use attached scatter (from my previous post), it will work, for sure. (if phone hardware is ok).

B.r.
Alex

[asrikerex]

Originally Posted by Brka

ROM is tested, and working, but provided scatter is wrong.
Use attached scatter (from my previous post), it will work, for sure. (if phone hardware is ok).

B.r.
Alex

Hai Br Alax. I need flash files for 5037X. this phone on boot loop. I've try wipe data in recovery mode but still on boot loop
I've try flash file from 5036A with SPFT version v3.1332.0 and version v5.1516 but it stay boot loop. even after Wipe data.
Please help me.
Here product code: 5037X-2ADHMY1

[Brka]

Originally Posted by asrikerex

Hai Br Alax. I need flash files for 5037X. this phone on boot loop. I've try wipe data in recovery mode but still on boot loop
I've try flash file from 5036A with SPFT version v3.1332.0 and version v5.1516 but it stay boot loop. even after Wipe data.
Please help me.
Here product code: 5037X-2ADHMY1

Have you tried to restore it using original OTU Updater ?

b.r.
Alex

[asrikerex]

Originally Posted by Brka

Have you tried to restore it using original
b.r.
Alex

Not good. i have problem with preloader before and OTU say you have latest sw, version. and i don't have any working PRO_INFO For this phone to trick OTU.

[Brka]

Originally Posted by asrikerex

Not good. i have problem with preloader before and OTU say you have latest sw, version. and i don't have any working PRO_INFO For this phone to trick OTU.

I dont see where is the problem, all is written inside scatter file,
whole map of eMMC memory in phone.
Open with text editor, and check for yourself.

Anyway, you can read pro_info from your phone, edit it and write back.

Use attached scatter file, load in spft, go to Read Back tab,
press ADD, double click on new appeared item,
select save location, enter start address : 0x700000 , length : 0x300000

After finished reading, use Notepad++ or some hex editor, find original
PID string inside, change to some other, get back to Download tab,
manually tick "pro_info", select file you edited, and download to phone.
If for some reason reports error, you can go to drop down menu "Window",
select "Write Memory", and under new tab, you can open pro_info file,
("open raw data"), select "emmc", input start address (same as for reading), and length,
and press "Write memory", after connect powered off phone to cable.

5037X, there is only one pid : 5037X-2ADHMY1 ;

Try with 5036X , pid's : 5036X-2AALEU1 or 5036X-2AALFR1 or 5036X-2AALGB1


post results.

b.r.
Alex

[msergi]

can you help me find that room pls....thank in advance

mine are not all checked the ones missing are protect_s protect_f and custpack, mobile_info but the files are in the folder why is this happening??

[w3ncyr3u™]

Originally Posted by hyber_99

finally phone is alive.
your scatter file is correct for flash 5036a

thank you so much.

hellow can u share the CACHE file for this rom im using the attached file
5063a but i recieve an error relating cache.

i found out that the file i downloaded has no CACHE

plss share im still working on

[Brka]

You dont need cache. Make format,
Reflash the phone and after flashing,
Do wipe data/cache from recovery.

B.r.
Alex

[nasser4life]

will this work with the 5036x?

[Brka]

Originally Posted by nasser4life

will this work with the 5036x?

For 5036X - use original 5036X ROM, Bulgaria region. Download - HERE

b.r.
Alex