mot v3 keypad problem - GSM-Forum

boyet_tech · 12-15-2007, 10:08

mot v3 keypad problem even changed with new flex

marc_andrei · 12-15-2007, 10:22

sir kindy check the volume switch near the lcd........

br

opaw · 12-15-2007, 10:31

Quote:

Originally Posted by boyet_tech

mot v3 keypad problem even changed with new flex

can u tel us the history of the fone so that we can help to figure out.....

boyet_tech · 12-15-2007, 10:33

ive already checked it, its better f u can show me jumpers on crystal i.c.

vinhidvinhid · 12-16-2007, 06:49

to repair the key pad of v3 problem: check and clean the connectors of lcd to key pad flex cable and volume flex cable. if too much corrosion, you may have to
change the lcd or volume flex cable. good luck.

Hasan mobile saver · 12-16-2007, 08:27

Quote:

Originally Posted by boyet_tech

mot v3 keypad problem even changed with new flex

BR.
See here..

http://*************.ipbfree.com/ind...=ST&f=88&t=266

boyet_tech · 12-17-2007, 12:06

hi gud pm everyone !! just wantd to ask about mot v3,ive changed it with new flex now it return to me aqftr two weeks coz the green or dial button will not function, could it be that the flex s the problem?

az_liton · 12-18-2007, 19:56

Quote:

Originally Posted by boyet_tech

mot v3 keypad problem even changed with new flex

see www.gsmbd.ipbfree.com

12-15-2007, 10:08	#1 (permalink)
boyet_tech Junior Member Join Date: Dec 2007 Posts: 23 Member: 643999 Status: Offline Thanks Meter: 1	mot v3 keypad problem mot v3 keypad problem even changed with new flex

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mot v360 keypad problem	Emeka Ejiogu	Motorola Hardware Repair	8	07-06-2009 09:40
mot V3 hard problem	gsm_slayer	Motorola Hardware Repair	3	09-21-2007 14:47
v3 keypad problem after flashing	antm	Smart-Clip	6	01-24-2006 07:19
Motorola V3 Keypad Problem !	goanga	Motorola P2k	6	06-21-2005 10:41
Motorola V3 keypad problems, please help.	yfgreene	Motorola P2k	0	01-11-2005 19:05

12-15-2007, 10:22	#2 (permalink)
marc_andrei Freak Poster Join Date: Aug 2006 Location: philippines Posts: 297 Member: 340454 Status: Offline Sonork: 1585326 Thanks Meter: 516	sir kindy check the volume switch near the lcd........ br

12-15-2007, 10:33	#4 (permalink)
boyet_tech Junior Member Join Date: Dec 2007 Posts: 23 Member: 643999 Status: Offline Thanks Meter: 1	ive already checked it, its better f u can show me jumpers on crystal i.c.

12-16-2007, 06:49	#5 (permalink)
vinhidvinhid Junior Member Join Date: Dec 2006 Location: texas Posts: 7 Member: 408876 Status: Offline Thanks Meter: 1	to repair the key pad of v3 problem: check and clean the connectors of lcd to key pad flex cable and volume flex cable. if too much corrosion, you may have to change the lcd or volume flex cable. good luck.

12-17-2007, 12:06	#7 (permalink)
boyet_tech Junior Member Join Date: Dec 2007 Posts: 23 Member: 643999 Status: Offline Thanks Meter: 1	hi gud pm everyone !! just wantd to ask about mot v3,ive changed it with new flex now it return to me aqftr two weeks coz the green or dial button will not function, could it be that the flex s the problem?