motorola masters....need your help here!V9 display - GSM-Forum

phedz · 06-29-2009, 05:09

motorola V9
problem: rambled display,sometimes blue!!!

action taken:
change flex,lcd ....no luck
used its lcd and flex in other v9 unit,its working....
(phone is working but the display only)

..............
now the problem is on its display IC i think???(hardware)hmmmmmmmmmm
can any one help me regarding this problem..or show me where is the exact display of this unit.....its my pleasure,who could help me

phedz · 06-30-2009, 04:58

anyone out there pls.............................

phedz · 07-02-2009, 04:22

none at all?....................

phedz · 07-05-2009, 03:47

updates this thread...................anyone pls..................

alegu · 09-03-2009, 05:27

I have same problem, if you are here yet, have you find solution?

phedz · 10-21-2009, 07:57

none at all.....................

viper1979 · 10-26-2009, 15:04

I have this problem in my V9. And I think, that no solution for this problem.

alegu · 10-27-2009, 21:26

I found that, if i push motherboard near the charge input problem fix it, so i give motherboard to my friend who repair my notebooks, and if he can fixit i post solution. (sorry my very bad english)

alegu · 11-24-2009, 15:23

the problem: seems to be flex problem, but if you change flex, problem not fix it. Well, real problem is board connector where flex to be connected.

The Solution: You must to re-solder that connector to board. This is a job for especialist.

06-29-2009, 05:09	#1 (permalink)
phedz Freak Poster Join Date: Aug 2008 Location: 100 islands philippines..... Posts: 461 Member: 850153 Status: Offline Sonork: 02123455 Thanks Meter: 138	motorola masters....need your help here!V9 display motorola V9 problem: rambled display,sometimes blue!!! action taken: change flex,lcd ....no luck used its lcd and flex in other v9 unit,its working.... (phone is working but the display only) .............. now the problem is on its display IC i think???(hardware)hmmmmmmmmmm can any one help me regarding this problem..or show me where is the exact display of this unit.....its my pleasure,who could help me

11-24-2009, 15:23	#9 (permalink)
alegu Junior Member Join Date: Sep 2007 Posts: 3 Member: 592977 Status: Offline Thanks Meter: 0	Fix it the problem: seems to be flex problem, but if you change flex, problem not fix it. Well, real problem is board connector where flex to be connected. The Solution: You must to re-solder that connector to board. This is a job for especialist.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need your help	murtaza_k	Nokia Base Band 5 ( BB-5 )	3	03-29-2010 20:09
Smart-Clip Team Need Your Help about V9 Unlocking with Smart-clip TP ........	ZoHaiB_(FoneGSM)	Smart-Clip	2	06-23-2008 15:59
6151 charging not supported.....Need your help here...	=Black Angel=	Nokia Base Band 5 ( BB-5 )	1	04-26-2008 05:56
Zulea I need your help here :mad:	Keke	SonyEricsson (USB-Smart)	8	06-19-2006 11:49
hı all sony erıcson master ı need yours help abaouth k700	kenwood	Sony Ericsson Hardware Repair	3	12-04-2005 15:44

06-30-2009, 04:58	#2 (permalink)
phedz Freak Poster Join Date: Aug 2008 Location: 100 islands philippines..... Posts: 461 Member: 850153 Status: Offline Sonork: 02123455 Thanks Meter: 138	anyone out there pls.............................

07-02-2009, 04:22	#3 (permalink)
phedz Freak Poster Join Date: Aug 2008 Location: 100 islands philippines..... Posts: 461 Member: 850153 Status: Offline Sonork: 02123455 Thanks Meter: 138	none at all?....................

07-05-2009, 03:47	#4 (permalink)
phedz Freak Poster Join Date: Aug 2008 Location: 100 islands philippines..... Posts: 461 Member: 850153 Status: Offline Sonork: 02123455 Thanks Meter: 138	updates this thread...................anyone pls..................

09-03-2009, 05:27	#5 (permalink)
alegu Junior Member Join Date: Sep 2007 Posts: 3 Member: 592977 Status: Offline Thanks Meter: 0	I have same problem, if you are here yet, have you find solution?

10-21-2009, 07:57	#6 (permalink)
phedz Freak Poster Join Date: Aug 2008 Location: 100 islands philippines..... Posts: 461 Member: 850153 Status: Offline Sonork: 02123455 Thanks Meter: 138	none at all.....................

10-26-2009, 15:04	#7 (permalink)
viper1979 Junior Member Join Date: May 2007 Posts: 17 Member: 499629 Status: Offline Thanks Meter: 5	I have this problem in my V9. And I think, that no solution for this problem.

10-27-2009, 21:26	#8 (permalink)
alegu Junior Member Join Date: Sep 2007 Posts: 3 Member: 592977 Status: Offline Thanks Meter: 0	I found that, if i push motherboard near the charge input problem fix it, so i give motherboard to my friend who repair my notebooks, and if he can fixit i post solution. (sorry my very bad english)