5130c failed to flash with usb - GSM-Forum

shachash · 03-23-2009, 11:14

Phone is in: Normal mode
Model: RM-495 ( RM-495)
V 05.80/18-12-08/RM-495 (c) Nokia
Production serial number HEC399350
Product code 0571949
Module code 0204024
Basic production code 0567772
Flash code
Order number
Long production SN 0
MCU SW V 05.80/18-12-08/RM-495/(c) Nokia
HW 1000
PCI
RFIC 06540601
DSP ICPR72_08w50
LCD SEIKO
PPM V 05.80/18-12-08/RM-495/(c) Nokia /S
BT MCM 2222-143C
Retu 16
Tahvo 22
Content Pack Content: s_red/V 05.80/18-12-08/RM-495/(c) Nokia /
IMEI: 359329024166746
Using Tx2 Data line.
Processing File: rm495__05.80.mcusw
Boot...
FAILED TO BOOT PHONE!!!
Make sure that phone is connected.
Using Tx2 Data line.
Processing File: rm495__05.80.mcusw
Boot...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&cffe83e&0&00# {4f919102-4adf-11d5-882d-00b0d02fe381}
Sending ULO code
Sending UPDAPP code
Sending PASUBTOC code
Pooling for device removal...
Device removed
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&1b10ddfc&0&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[63.63 MB]...
erasing RAP [00000000 to 000006BF]
erasing RAP [000006C0 to 0001FFFF]
erasing RAP [00040000 to 000BFFFF]
erasing RAP [000C0000 to 0013FFFF]
erasing RAP [00140000 to 0137FFFF]
erasing RAP [01380000 to 0151FFFF]
erasing RAP [01DC0000 to 0215FFFF]
erasing RAP [02160000 to 03FBFFFF]
erasing RAP [01520000 to 01DBFFFF]
in 249.69s
Flash[18.12 MB]...
%%%%%%%% ERROR SENDING FLASH:
Failed at address 00000400

blackstar955 · 03-24-2009, 22:19

Uncheck Tx2 Data line and check vpp in automatic setings after flash....

Kastas · 03-31-2009, 10:59

Had exact problem with usb(mtbox) - took 6555 cable and moved pins to top left(no other modifications) like on image http://forum.gsmhosting.com/vbb/show...1&postcount=88, flashed with jaf 1.98.62.

nasirahmed · 04-19-2009, 10:50

Successfully flashed with Phoenix Patched via USB.

Jr Telecom · 07-04-2009, 21:16

Fixed flashing with MTbox (1.59)
MT-BOX Added support for USB flashing 5130 and similar models (using Dead USB is more stable)

Also u can flash with UNI cable
Here is Pinout attached>>>>>>

Tapanhaz · 09-02-2009, 19:12

He need the solution with usb. I need it, most of the users need it. If anyone have solution please post it. Its not a uni cable or any other cable's question. I don't know why everyone is giving alternative solution. When a new model comes to repairing we does not have the uni ufc 10 pin/ 7 pin cables. It is only available in our local market after 4 months of launching. But everybody have the usb cable. In my local area the phone cames to repair after 20 days. Most of the people does not like to go to ***** service centre for their late delivery( minimum time - one month!!!).

03-23-2009, 11:14	#1 (permalink)
shachash No Life Poster Join Date: Feb 2004 Age: 48 Posts: 699 Member: 51905 Status: Offline Thanks Meter: 41	5130c failed to flash with usb Phone is in: Normal mode Model: RM-495 ( RM-495) V 05.80/18-12-08/RM-495 (c) Nokia Production serial number HEC399350 Product code 0571949 Module code 0204024 Basic production code 0567772 Flash code Order number Long production SN 0 MCU SW V 05.80/18-12-08/RM-495/(c) Nokia HW 1000 PCI RFIC 06540601 DSP ICPR72_08w50 LCD SEIKO PPM V 05.80/18-12-08/RM-495/(c) Nokia /S BT MCM 2222-143C Retu 16 Tahvo 22 Content Pack Content: s_red/V 05.80/18-12-08/RM-495/(c) Nokia / IMEI: 359329024166746 Using Tx2 Data line. Processing File: rm495__05.80.mcusw Boot... FAILED TO BOOT PHONE!!! Make sure that phone is connected. Using Tx2 Data line. Processing File: rm495__05.80.mcusw Boot... \\?\nmwcd#vid_0421&pid_0106&if_oth#6&cffe83e&0&00# {4f919102-4adf-11d5-882d-00b0d02fe381} Sending ULO code Sending UPDAPP code Sending PASUBTOC code Pooling for device removal... Device removed Pooling for ADL device... \\?\nmwcd#vid_0421&pid_0105&if_oth#6&1b10ddfc&0&00 #{4f919102-4adf-11d5-882d-00b0d02fe381} Erase[63.63 MB]... erasing RAP [00000000 to 000006BF] erasing RAP [000006C0 to 0001FFFF] erasing RAP [00040000 to 000BFFFF] erasing RAP [000C0000 to 0013FFFF] erasing RAP [00140000 to 0137FFFF] erasing RAP [01380000 to 0151FFFF] erasing RAP [01DC0000 to 0215FFFF] erasing RAP [02160000 to 03FBFFFF] erasing RAP [01520000 to 01DBFFFF] in 249.69s Flash[18.12 MB]... %%%%%%%% ERROR SENDING FLASH: Failed at address 00000400

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
i need help for E65 fail to flash with all tool	chronic	Cyclonebox	1	01-26-2010 10:24
Need flash to W700i to flash with USB-SMART	gsm_unlock2	Sony Ericsson	1	04-21-2007 15:21
Baud Rate to flash with usb smart?	Card	SonyEricsson (USB-Smart)	4	12-25-2005 15:34

03-24-2009, 22:19	#2 (permalink)
blackstar955 Registered User Join Date: Sep 2002 Location: unknown Age: 42 Posts: 130 Member: 15353 Status: Offline Thanks Meter: 15	Uncheck Tx2 Data line and check vpp in automatic setings after flash....

03-31-2009, 10:59	#3 (permalink)
Kastas Junior Member Join Date: Nov 2005 Posts: 20 Member: 202843 Status: Offline Thanks Meter: 0	Had exact problem with usb(mtbox) - took 6555 cable and moved pins to top left(no other modifications) like on image http://forum.gsmhosting.com/vbb/show...1&postcount=88, flashed with jaf 1.98.62.

04-19-2009, 10:50	#4 (permalink)
nasirahmed No Life Poster Join Date: Mar 2004 Location: LGE Posts: 3,950 Member: 57760 Status: Offline Sonork: 100.1579298 Thanks Meter: 3,510	Successfully flashed with Phoenix Patched via USB.

09-02-2009, 19:12	#6 (permalink)
Tapanhaz Junior Member Join Date: Sep 2007 Posts: 31 Member: 591049 Status: Offline Thanks Meter: 3	He need the solution with usb. I need it, most of the users need it. If anyone have solution please post it. Its not a uni cable or any other cable's question. I don't know why everyone is giving alternative solution. When a new model comes to repairing we does not have the uni ufc 10 pin/ 7 pin cables. It is only available in our local market after 4 months of launching. But everybody have the usb cable. In my local area the phone cames to repair after 20 days. Most of the people does not like to go to ***** service centre for their late delivery( minimum time - one month!!!).