5300 dead after flash - GSM-Forum

saeedhex · 09-14-2007, 16:13

Please help mt-box support, after downgrade the 5300 , phone is dead now,
here is the log:

Phone is in: Local mode
Model: RM-146 (Cosmo )
V 05.00/27-04-07/RM-146 (c) Nokia.
Production serial number PPA723972
Product code 0554307
Module code 0202938
Basic production code 0551011
Flash code
Order number
Long production SN
MCU SW V 05.00/27-04-07/RM-146/(c) Nokia.
HW 2505
PCI
RFIC 17211721
DSP pb06w14v51
PPM V 05.00/27-04-07/RM-146/(c) Nokia. /C
BT MCM 06cc-P9.1
Retu 32
Tahvo 53
Content Pack Content: o2_pre_uk_allb/V 05.00/19-06-07/RM-146/(c) Nokia. //
IMEI: 356408014137447
WARNING: VPP pin is not connected, disabling VPP.

BB5 Downgrade - - - - - - - - - - -
VBat is 3.90V

Vpp pin has 0.10V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Local mode
Found record. Clearing and sending to phone..
============== Staring flash procedure =================
VPP is DISABLED.
Using Tx2 Data line.
BB5 PM back Phone is in: Local mode
IMEI: 356408014137447
Backup file: C:\Program Files\GriffinTeam\MT-Box\bb5bckup\RM-146_356408014137447.pm
Processing File: rm146__03.92.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Backup: \GSM_35640801413744.r3c
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 0001FFFF]
Erase RAP3 [00020000 - 0007FFFF]
Erase RAP3 [00080000 - 000DFFFF]
Erase RAP3 [00100000 - 001FFFFF]
Erase RAP3 [00200000 - 0031FFFF]
Erase RAP3 [00320000 - 0105FFFF]
Erase RAP3 [01060000 - 01067FFF]
Erase RAP3 [01068000 - 0107FFFF]
Erase[16.38 MB]...
Waiting response for 320 Sec...in 42.89s
Flash[14.21 MB]...
Data Error!!
Check TX2 line!

%%%%%%%% ERROR SENDING FLASH:
Failed at address 00000000

thehien · 09-14-2007, 16:16

Check on Disable VPP and uncheck TX2 line then try again.

saeedhex · 09-14-2007, 21:29

problem is phone does not go to test mode or local mode any more,

girifin team support please help.

SoftMobile · 09-14-2007, 22:49

@saeedhex

What mtb nk version you use?

911GT · 09-15-2007, 08:17

flash phone like @thehien say with Fbus cable and next time be more carefull what from options is checked.Your mistake is this: USETX2Line is checked but cable is not connected.
after click on a button "OK" you will see and VPP is not connected then need to check DisableVPP option.

Mr Twitch · 09-16-2007, 22:40

same problem black 5300 now dead after downgrade????????

911GT · 09-17-2007, 07:57

may be you wrong anything its impossible

do you use 1.37.exe?
where is the log?
how we can try to help you without see where is the problem.

09-14-2007, 16:13	#1 (permalink)
saeedhex Freak Poster Join Date: Jan 2005 Age: 51 Posts: 138 Member: 107172 Status: Offline Thanks Meter: 3	5300 dead after flash Please help mt-box support, after downgrade the 5300 , phone is dead now, here is the log: Phone is in: Local mode Model: RM-146 (Cosmo ) V 05.00/27-04-07/RM-146 (c) Nokia. Production serial number PPA723972 Product code 0554307 Module code 0202938 Basic production code 0551011 Flash code Order number Long production SN MCU SW V 05.00/27-04-07/RM-146/(c) Nokia. HW 2505 PCI RFIC 17211721 DSP pb06w14v51 PPM V 05.00/27-04-07/RM-146/(c) Nokia. /C BT MCM 06cc-P9.1 Retu 32 Tahvo 53 Content Pack Content: o2_pre_uk_allb/V 05.00/19-06-07/RM-146/(c) Nokia. // IMEI: 356408014137447 WARNING: VPP pin is not connected, disabling VPP. BB5 Downgrade - - - - - - - - - - - VBat is 3.90V Vpp pin has 0.10V, Not Connected Pins: Mbus 1, Box Tx 1, Box Rx 1, Bsi 0 Phone is in: Local mode Found record. Clearing and sending to phone.. ============== Staring flash procedure ================= VPP is DISABLED. Using Tx2 Data line. BB5 PM back Phone is in: Local mode IMEI: 356408014137447 Backup file: C:\Program Files\GriffinTeam\MT-Box\bb5bckup\RM-146_356408014137447.pm Processing File: rm146__03.92.mcusw Boot... rap3gv3_2nd.fg RAP3Gv3_algo.fg Backup: \GSM_35640801413744.r3c Erase RAP3 [00000000 - 000006BF] Erase RAP3 [000006C0 - 0001FFFF] Erase RAP3 [00020000 - 0007FFFF] Erase RAP3 [00080000 - 000DFFFF] Erase RAP3 [00100000 - 001FFFFF] Erase RAP3 [00200000 - 0031FFFF] Erase RAP3 [00320000 - 0105FFFF] Erase RAP3 [01060000 - 01067FFF] Erase RAP3 [01068000 - 0107FFFF] Erase[16.38 MB]... Waiting response for 320 Sec...in 42.89s Flash[14.21 MB]... Data Error!! Check TX2 line! %%%%%%%% ERROR SENDING FLASH: Failed at address 00000000

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 5300 dead after flash with 5200 files	Raulperez53	MT-BOX	6	08-04-2008 01:39
5300 dead after flashing	lankan	n-Box	3	05-24-2007 10:16

09-14-2007, 16:16	#2 (permalink)
thehien Freak Poster Join Date: Nov 2006 Location: Ho Chi Minh, Vietnam Posts: 135 Member: 382965 Status: Offline Thanks Meter: 9	Check on Disable VPP and uncheck TX2 line then try again.

09-14-2007, 21:29	#3 (permalink)
saeedhex Freak Poster Join Date: Jan 2005 Age: 51 Posts: 138 Member: 107172 Status: Offline Thanks Meter: 3	problem is phone does not go to test mode or local mode any more, girifin team support please help.

09-14-2007, 22:49	#4 (permalink)
SoftMobile No Life Poster Join Date: Feb 2002 Location: Hong Kong Posts: 4,330 Member: 9290 Status: Offline Sonork: 100.57287 Thanks Meter: 35	@saeedhex What mtb nk version you use?

09-15-2007, 08:17	#5 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	flash phone like @thehien say with Fbus cable and next time be more carefull what from options is checked.Your mistake is this: USETX2Line is checked but cable is not connected. after click on a button "OK" you will see and VPP is not connected then need to check DisableVPP option.

09-16-2007, 22:40	#6 (permalink)
Mr Twitch Freak Poster Join Date: May 2004 Age: 51 Posts: 227 Member: 66748 Status: Offline Thanks Meter: 1	same problem black 5300 now dead after downgrade????????

09-17-2007, 07:57	#7 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	may be you wrong anything its impossible do you use 1.37.exe? where is the log? how we can try to help you without see where is the problem.