8800e-1 (RM-233) upgraded ok via USB.
 

Phone is in: Normal mode
Scanning files, please wait...
Done
Model: RM-233 ( 8800e-1)
V 05.20/12-11-07/RM-233 (c) Nokia
Production serial number MXH075806
Product code 0551978
Module code
Basic production code 0540028
Flash code
Order number
Long production SN 0
MCU SW V 05.20/12-11-07/RM-233/(c) Nokia
HW 1000
PCI
RFIC 17141715
DSP ICPR71_07w43
LCD SEIKO
PPM V 05.20/12-11-07/RM-233/(c) Nokia /A
BT MCM 06cc-P9.2
Retu 15
Tahvo 22
Content Pack Content: a/V 05.20/12-11-07/RM-233/(c) Nokia /
IMEI: 358645010......
Selected Highest installed version: 05.21
============= Set Flash mode for info =============
VBat is 3.95V

Vpp pin has 0.09V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
Boot...
Invalid response from RAP3 boot( cable problem/damaged RAP3 chip/damaged phone power circuit
============= Set FBus mode for info =============
VBat is 3.99V

Vpp pin has 0.10V, Not Connected
Pins:
Mbus 1, Box Tx 0, Box Rx 0, Bsi 0
Phone is in: Normal mode
Model: RM-233 ( 8800e-1)
V 05.20/12-11-07/RM-233 (c) Nokia
IMEI: 358645010......
BB5 PM back Phone is in: Normal mode
IMEI: 358645010......
Backup file: C:\Program Files\GriffinTeam\MT-Box\bb5bckup\RM-233_358645010094241.pm
Processing File: rm233__05.21.mcusw
Boot...
\\?\nmwcd#vid_0421&pid_000b&if_oth#6&398447ff&0&05 #{4f919102-4adf-11d5-882d-00b0d02fe381}
Sending UPDAPP code
Restarting device...
Pooling for device removal...
Device removed
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&2a44604b&0&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[63.50 MB]...
erasing RAP [00000000 to 0001FFFF]
erasing RAP [00040000 to 000BFFFF]
erasing RAP [000C0000 to 0013FFFF]
erasing RAP [013C0000 to 0153FFFF]
erasing RAP [00140000 to 013BFFFF]
erasing RAP [01EC0000 to 03F9FFFF]
erasing RAP [01BC0000 to 01EBFFFF]
erasing RAP [01540000 to 01BBFFFF]
in 188.97s
Flash[18.59 MB]...in 118.72s
* * Processed file in 330.11 seconds
Processing File: rm233__05.21_ISM_004.image_i_ua
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&2a44604b&0&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 2.81s
Flash[50.11 MB]...in 182.08s
* * Processed file in 185.08 seconds
Processing File: rm233__05.21.ppm_i
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&2a44604b&0&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.20s
Flash[5.21 MB]...in 34.02s
* * Processed file in 34.39 seconds
Restarting device...
Pooling for device removal...
Device disconnected.
* * * Phone flashing done in 9:19 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V 05.21/30-11-07/RM-233 (c) Nokia
IMEI: 358645010......
Factory Default Settings...OK

WBR Kasner

yes
testat ! with usb

i need 8800e-1 (RM-233) flash file help me any body