c6-01 RM-718 = NO CHECK BUT INFO OK

[HZZORY4GSM]

I HAVE C6-01 NEED TO RPL BECUASE IMEI IS : 123456
WHEN I CONNECT TO MY MT-BOX LAST VERTION : MTB_NK2_42_2 I CON'T MAKE CHECK TO IT TO MAKE ORDER FOR BUY RPL
BUT WHEN PRESS Phone Info i get this log

Phone is in: Test mode
Model: DCT4 models
	V 79_sr1_11w42.5/25-11-11/RM-601 (c) Nokia
Production serial number	0  
Module code	   
Basic production code	   
Flash code	   
Order number	   
Long production SN	0  
MCU SW V 79_sr1_11w42.5/25-11-11/RM-601/(c) Nokia 
PCI    
RFIC   |Alli_4.3.4  
DSP   79_SR1_11w42.5   
APE SW Core 	111.030.0609   
APE Variant 	111.030.0609111.030.0609.10.01111.030.0609.C00.01  
APE Test 	0.064  
Retu 	40     
Tahvo 	00     
APE HW 	256
APE ADSP SW 	256
	IMEI: 12345610654321?
Unable to measure VPP

AND WHEN I TRAY CHECK IT BY CLICK ON OK BUTTON I GOT THIS LOG

 ============= Set Flash mode for info ============= 
Boot...
                    Using Tx2 Data line.
Trying boot BB5 phone...

Invalid response from RAP3 boot( cable problem/damaged RAP3 chip/damaged phone power circuit
Trying boot DCT4 phone...

============= Set FBus mode for info =============
Pins:
     Mbus 1, Box Tx 1, Box Rx 0, Bsi 0

I USE 8 PIN CABLE WITH IP MART ADAPTER
AND I TRY TO USE UFC4
AND TRY TO USE 10 PIN CABLE
ALL TIME SAME RESULT .....
SO CAN ANY BODY HELP PLEASE ...........