db2020 inside v2.0 problem to unlock [help] - GSM-Forum

globogsm2 · 05-23-2007, 03:51

I have mt-box Nokia and I want to try to do I unlock it on telephone sonyericsson k800i, therefore I have installed DB2020 inside V2.0, I have checked in the menù of the telephone if the 5 padlocks were open(>*<<*<* service menu -> Service info -> Sim lock), oks are open all and 5, then I have checked the version of the firmware, and there is this :

R1ED001 prgCXC1250210_GENERIC_WI R1ED001

then I have gone to check in \Programmi\GriffinTeam\MT SonyEricsson\DB2020 inside\flr\K800 , and the file there is .

then I have connected her mt-box and I have inserted the cable in the k800i , and I have opened db2020inside , I have pressed the key info , and these information have gone out :

Power on the phone...
Boot OK.

PID:......99 00 03 01 FF FF FF FF
IMEI:.....351707-01-0xxxxx
PAF:......01
CID(dec):.49
CID(hex):.31
MfrID0:...89
DevID0:...7E
Color:....RED
CID in FLASH(dec):49
CID in FLASH (hex):31

Finished.

To this point, a window should be opened for choosing the file DB2020Unlock.act , but doesn't nothing happen, from thing it depends?

When I have begun to make the test I still had the whole 10 disposition possibility, I am now this way :

SonyEricsson Trial: 6 left, each max 15min (I have tried 4 times)

and the credits in the server are there :

Using Account: xxxxxxxx
Connect...
Resp:
o/0110/hello there
Login...
OK, available count
100/Added Panasonic X700 and VS3 and Alcatel E-xxx
Download lates version from
www.griffinteam.net

/
NK FLASH IMEI 10
NK 7250 to 7250i 10
NK FLASH+UEM IMEI 10
NK 7250i+FLASH+UEM 10
Panasonic x70 1
Maxon 792x 1
Maxon 797x 1
NK ESN FLASH 10
LG-G7050 1
Panasonic GD55 1
Siemens ST 55 1
Panasonic G50 1
NK ESN FLASH+UEM 10
Panasonic x60 1
Siemens ST 60 1
Sharp GX30/TM100 1
LG C3100/C1200/C1100/7100/G7120 1
LG-81XX 1
K700_1 0
K700_2 5
SiemensC62_1 0
SiemensC62_2 5
SiemensC62_3 0
SiemensC62_4 5
SiemensC62_5 5
Panasonic_A100 1
NKF 10
NKUF 10
NK_DCT4_PLUS 5
NK_DCT4_ASIC11 5
Panasonic X700 1
Panasonic VS3 1
Alcatel E-xxx 10
Alcatel C 10
Alcatel E801 10
NK_BB5_CERT_REST 40
NK_BB5_PM_AUTH 0

---------------------
CREDIT COUNT: 100;

Mistake me something, or does it depend on the program? Thanks

SoftMobile · 05-23-2007, 10:00

Just drag and drop db2020unlock.act to software window as described in user manual page 8 (how to add files to software).

globogsm2 · 05-23-2007, 13:41

I have used the drag and drop method and press Do it , and riceve this :

Power on the phone...
Boot OK.

PID:......99 00 03 01 FF FF FF FF
IMEI:.....351707-01-0xxxxx
PAF:......01
CID(dec):.49
CID(hex):.31
MfrID0:...89
DevID0:...7E
Color:....RED
CID in FLASH(dec):49
CID in FLASH (hex):31

Boot error:1

SoftMobile · 05-23-2007, 13:54

Reconnect battery and cable the do it again.

globogsm2 · 05-23-2007, 14:04

I was using the cable adapter, I have removed it and hour works:

Power on the phone...
Boot OK.

PID:......99 00 03 01 FF FF FF FF
IMEI:.....351707-01-014110
PAF:......01
CID(dec):.49
CID(hex):.31
MfrID0:...89
DevID0:...7E
Color:....RED
CID in FLASH(dec):49
CID in FLASH (hex):31

Processing: DB2020 Unlock

Total:00.00.53.897

The end.

hour but I have a problem, the telephone was extinguished, and in order to ignite I have made it flash, and I receive this message when I ignite it: Erro of configuration. To contact the manager of net or the center services. If I write gdfs in order to arrange, rivers block the telephone?

SoftMobile · 05-23-2007, 19:40

What is the phone status at the moment, dead, live, locked, unlocked, please wait ?

globogsm2 · 05-23-2007, 20:17

to the moment it is turned on and on the display there is this writing :

Erro of configuration. To contact the manager of net or the center services.

Zgsm · 05-23-2007, 20:22

U must customize Fs Now.

SoftMobile · 05-23-2007, 21:23

Quote:

Originally Posted by globogsm2

to the moment it is turned on and on the display there is this writing :

Erro of configuration. To contact the manager of net or the center services.

Write to phone MCU+DEC+CUS

globogsm2 · 05-24-2007, 15:18

Ok, has resolved, thanks.

mlmr · 05-24-2007, 22:55

I`ve unlocked one K800 , one W710 and one W810 by MT-Box, all of tham I need to press power during the process.
When I got error the phone didn`t power on, Than I do the process again until the end information and the phone worked well.
Thanks MT-Box team.
Today I bought more log`s and a MT-Box Sony-ericsson due to my bonus from my MT-NK is almost in the end

05-23-2007, 03:51	#1 (permalink)
globogsm2 Freak Poster Join Date: Jun 2004 Location: Italia-Roma Age: 49 Posts: 237 Member: 68373 Status: Offline Thanks Meter: 10	db2020 inside v2.0 problem to unlock [help] I have mt-box Nokia and I want to try to do I unlock it on telephone sonyericsson k800i, therefore I have installed DB2020 inside V2.0, I have checked in the menù of the telephone if the 5 padlocks were open(><<<* service menu -> Service info -> Sim lock), oks are open all and 5, then I have checked the version of the firmware, and there is this : R1ED001 prgCXC1250210_GENERIC_WI R1ED001 then I have gone to check in \Programmi\GriffinTeam\MT SonyEricsson\DB2020 inside\flr\K800 , and the file there is . then I have connected her mt-box and I have inserted the cable in the k800i , and I have opened db2020inside , I have pressed the key info , and these information have gone out : Power on the phone... Boot OK. PID:......99 00 03 01 FF FF FF FF IMEI:.....351707-01-0xxxxx PAF:......01 CID(dec):.49 CID(hex):.31 MfrID0:...89 DevID0:...7E Color:....RED CID in FLASH(dec):49 CID in FLASH (hex):31 Finished. To this point, a window should be opened for choosing the file DB2020Unlock.act , but doesn't nothing happen, from thing it depends? When I have begun to make the test I still had the whole 10 disposition possibility, I am now this way : SonyEricsson Trial: 6 left, each max 15min (I have tried 4 times) and the credits in the server are there : Using Account: xxxxxxxx Connect... Resp: o/0110/hello there Login... OK, available count 100/Added Panasonic X700 and VS3 and Alcatel E-xxx Download lates version from www.griffinteam.net / NK FLASH IMEI 10 NK 7250 to 7250i 10 NK FLASH+UEM IMEI 10 NK 7250i+FLASH+UEM 10 Panasonic x70 1 Maxon 792x 1 Maxon 797x 1 NK ESN FLASH 10 LG-G7050 1 Panasonic GD55 1 Siemens ST 55 1 Panasonic G50 1 NK ESN FLASH+UEM 10 Panasonic x60 1 Siemens ST 60 1 Sharp GX30/TM100 1 LG C3100/C1200/C1100/7100/G7120 1 LG-81XX 1 K700_1 0 K700_2 5 SiemensC62_1 0 SiemensC62_2 5 SiemensC62_3 0 SiemensC62_4 5 SiemensC62_5 5 Panasonic_A100 1 NKF 10 NKUF 10 NK_DCT4_PLUS 5 NK_DCT4_ASIC11 5 Panasonic X700 1 Panasonic VS3 1 Alcatel E-xxx 10 Alcatel C 10 Alcatel E801 10 NK_BB5_CERT_REST 40 NK_BB5_PM_AUTH 0 --------------------- CREDIT COUNT: 100; Mistake me something, or does it depend on the program? Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
iPhone 3G -> How to upgrade V2.0.2 to V2.2.0 instead V2.2.1 ? HELP!!!	Mr.Ultimate	iPhone 2 / iPhone 3G / iPhone 3GS	5	02-26-2009 06:31
i phone 3g v2.0 how to unlock	goverdhan	iPhone 2 / iPhone 3G / iPhone 3GS	24	08-13-2008 18:09
N73 problem to unlock help	G-THANG	BB5BOX	2	10-11-2007 19:05
15.08.2007 - DB2020 inside v2.6 free flash for DB2020 phones	SoftMobile	MT-BOX	48	08-25-2007 14:44
17.08.2007 - DB2020 inside v2.7 free flash for DB2020 phones	Andra	MT-BOX	6	08-18-2007 11:51

05-23-2007, 10:00	#2 (permalink)
SoftMobile No Life Poster Join Date: Feb 2002 Location: Hong Kong Posts: 4,330 Member: 9290 Status: Offline Sonork: 100.57287 Thanks Meter: 35	Just drag and drop db2020unlock.act to software window as described in user manual page 8 (how to add files to software).

05-23-2007, 13:41	#3 (permalink)
globogsm2 Freak Poster Join Date: Jun 2004 Location: Italia-Roma Age: 49 Posts: 237 Member: 68373 Status: Offline Thanks Meter: 10	I have used the drag and drop method and press Do it , and riceve this : Power on the phone... Boot OK. PID:......99 00 03 01 FF FF FF FF IMEI:.....351707-01-0xxxxx PAF:......01 CID(dec):.49 CID(hex):.31 MfrID0:...89 DevID0:...7E Color:....RED CID in FLASH(dec):49 CID in FLASH (hex):31 Boot error:1

05-23-2007, 13:54	#4 (permalink)
SoftMobile No Life Poster Join Date: Feb 2002 Location: Hong Kong Posts: 4,330 Member: 9290 Status: Offline Sonork: 100.57287 Thanks Meter: 35	Reconnect battery and cable the do it again.

05-23-2007, 14:04	#5 (permalink)
globogsm2 Freak Poster Join Date: Jun 2004 Location: Italia-Roma Age: 49 Posts: 237 Member: 68373 Status: Offline Thanks Meter: 10	I was using the cable adapter, I have removed it and hour works: Power on the phone... Boot OK. PID:......99 00 03 01 FF FF FF FF IMEI:.....351707-01-014110 PAF:......01 CID(dec):.49 CID(hex):.31 MfrID0:...89 DevID0:...7E Color:....RED CID in FLASH(dec):49 CID in FLASH (hex):31 Processing: DB2020 Unlock Total:00.00.53.897 The end. hour but I have a problem, the telephone was extinguished, and in order to ignite I have made it flash, and I receive this message when I ignite it: Erro of configuration. To contact the manager of net or the center services. If I write gdfs in order to arrange, rivers block the telephone?

05-23-2007, 19:40	#6 (permalink)
SoftMobile No Life Poster Join Date: Feb 2002 Location: Hong Kong Posts: 4,330 Member: 9290 Status: Offline Sonork: 100.57287 Thanks Meter: 35	What is the phone status at the moment, dead, live, locked, unlocked, please wait ?

05-23-2007, 20:17	#7 (permalink)
globogsm2 Freak Poster Join Date: Jun 2004 Location: Italia-Roma Age: 49 Posts: 237 Member: 68373 Status: Offline Thanks Meter: 10	to the moment it is turned on and on the display there is this writing : Erro of configuration. To contact the manager of net or the center services.

05-23-2007, 20:22	#8 (permalink)
Zgsm Freak Poster Join Date: Mar 2006 Location: ALGERIA Posts: 407 Member: 245626 Status: Offline Thanks Meter: 21	U must customize Fs Now.

05-24-2007, 15:18	#10 (permalink)
globogsm2 Freak Poster Join Date: Jun 2004 Location: Italia-Roma Age: 49 Posts: 237 Member: 68373 Status: Offline Thanks Meter: 10	Ok, has resolved, thanks.

05-24-2007, 22:55	#11 (permalink)
mlmr Freak Poster Join Date: Feb 2005 Location: Pampas Gaúcho tchê Age: 48 Posts: 288 Member: 116335 Status: Offline Thanks Meter: 17	I`ve unlocked one K800 , one W710 and one W810 by MT-Box, all of tham I need to press power during the process. When I got error the phone didn`t power on, Than I do the process again until the end information and the phone worked well. Thanks MT-Box team. Today I bought more log`s and a MT-Box Sony-ericsson due to my bonus from my MT-NK is almost in the end