How To Make Rpl File And Send?

[Nasmi]

Hi mates i am a new userforASK RPL service please eny body help me to howto make rpl file andhow to sen please help me step by step

THANKS
NASMI

[Afzaal]

With Which Flasher ?

BR,,,

[Nasmi]

Originally Posted by Afzaal

With Which Flasher ?

BR,,,

Hi i am using MT box and which cable i can use for this normal UFS cable is ok? or i need to modify cable?

THANKS
NASMI

[.:T0PNET_GSM:.]

Originally Posted by Nasmi

Hi mates i am a new userforASK RPL service please eny body help me to howto make rpl file andhow to sen please help me step by step

THANKS
NASMI

hi
u can make ASK file and send for griifin SERVER by GriffinSAccess_1.34.1
you make ASK by MT BOX -imei option -read Ask BB5 item AND SAVE in directory.
B,R
AMIN SOVEITI
TOPNET_GSM

[Nasmi]

Hi mates thanks ur reply i pressed READ ASK RPL button its asking to save location then i select location but nothing saving still at same status

my log
MTBOX: 00100d50db - Nokia Flash/Repair v1_32
Box: CR V 1.001 256
Code: NK V 1.001 1046
SN: 00100d50db
Nokia Unlimited: 408 times started
SonyEricsson Trial: 2 left, each max 15min
Boot...
rap3gv2_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
h3_sam_nand_gbbm.fg
BOOT OK...

THANKS
NASMI

[.:T0PNET_GSM:.]

pressed READ ASK BB5 RPL button and rename location save :
*.ask to IMEI 15 Digit NO in Location dir

BR
AMIN SOVEITI
TOPNET_GSM

[Nasmi]

Originally Posted by amin_7742

pressed READ ASK BB5 RPL button and rename location save :
*.ask to IMEI 15 Digit NO in Location dir

BR
AMIN SOVEITI
TOPNET_GSM

Hi mates thanks mate ur help i read and i send. how long it will take for calculation?

THANKS
NASMI

[.:T0PNET_GSM:.]

Run GriffinSAccess.exe

select login method : USER NAME

ENTER YOUR USER NAME AND PASS FOR GT SERVER

click on CheckAccount

very important is to have this 2 services:


NK_BB5_PM_AUTH 0 credits
NK_BB5_CERT_REST 40 credits

Is possible some special (limited) accounts to not have this 2 services

How to use GTSAccess 1.34 for BB5 ASK/RPL

Click on send file(s) select ask file which was read with MT box( we do not support other product formats)
you will see this:


Server IP: 213.16.42.125, Box_SNyour user name )
Connect... Resp: o/0110/hello there
Login...OK, available count xxx;

busy, waiting...
e/0/accepted;

accepted ; means your file is good and is recieved for calculation from server

So now neade to wait from 1 hr to 24 hr ( usual time 15 mins )

If for some reason the RPL file is not computed within 72h, the ASK will be deleted from server,and the credits will be restored to the account. This also means that maximum calculation time for RPLs is 72h.
It should be around 20 min when normal operation.


How to get your rpl:
Again need to click on send file select same file and you can see 2 variants:

1.

busy, waiting...
e/0/pending;

pending; means your ask file is still under calculation and need to check later

2.
busy, waiting...
Data Received!
File <C:\xxxfolder\35xx0300x4xx0x7.RPL> Created!

So this is your RPL file now can use MTbox to write in phone.

Please don't send ASK files from EMPTY BOARDS. They will not be computed.




!!!! VERY IMPORTANT !!!!

ALL WE KNOW FOR PROBLEMS WHIT BAD QUALITY SERVICE CABLES.

ON THIS CASE IS CRITICAL PHONE TO BE IN LOCAL OR TEST MODE after RESTART from certificate write.

so please check this link:

http://forum.gsmhosting.com/vbb/show...58&postcount=6

Problem is also 10 to 8 pin adapter cable connectors have very poor contact of GND and this come a big problem.

(we already start producing new type adapter cable)

Some times is need to push hard RG45 to adapter to be able to have any communication.

So if you not see this:

Simlock send - SUCCESSFULL!!!
SuperDongle send - SUCCESSFULL!!!

Simple check YOUR cable connection befor make any posting on forums.



B.R,
TOPNET_GSM

[yipp333]

error shown bb5 read ask file
Phone is in: RF Innactive mode
Model: RM-36 (Milla )
V 04wk47_m_v9.2/23-11-05/RM-36 (c) Nokia.
Production serial number CQB086447
Product code 0523638
Module code
Basic production code 0516030
Flash code
Order number
Long production SN
MCU SW V 04wk47_m_v9.2/23-11-05/RM-36/(c) Nokia.
HW 6015
PCI
RFIC 150a160e
DSP 04w47v22
Retu 32
Tahvo 41
IMEI: 355664003521451
Using Tx2 Data line.
Boot...
rap3gv2_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
Failed to boot send APE 2ND (bad APE)
--------------------------------------
Ask creation failed.

[911GT]

uncheck Use Tx2 Data line. and try again mate