N95 dead with FBUS flashing.Please help! - GSM-Forum

KUBAT1 · 06-05-2007, 15:04

I tried to flash N95 with MTBOX new v1.32, it started flash and wait for 320 sec. but it waited and waited 45 min. nothing happened, then I ended flashing with removing MTBOX usb cable, now always error. can anybody tell me how to revive the phone afternow.. Pleas ehlp urgent!!!

Selected Highest installed version: 11.0.026
Using Tx2 Data line.
Processing File: RM-159_11.0.026_PR.C0R
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg

%%%%%%%% ERROR BOOTING:
Using Tx2 Data line.
Processing File: RM-159_11.0.026_PR.C0R
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg

%%%%%%%% ERROR BOOTING:
Using Tx2 Data line.
Processing File: RM-159_11.0.026_PR.C0R
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg

%%%%%%%% ERROR BOOTING:
Using Tx2 Data line.
Processing File: RM-159_11.0.026_PR.C0R
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg

%%%%%%%% ERROR BOOTING:
VPP is DISABLED.
Using Tx2 Data line.
Processing File: RM-159_11.0.026_PR.C0R
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg

%%%%%%%% ERROR BOOTING:[/COLOR]

911GT · 06-05-2007, 16:15

do you have a conected TX2 line to cable?
disble this option nad try

KUBAT1 · 06-05-2007, 16:21

what do you mean? disable TX2 from software or just disconnect RX2 pin?

KUBAT1 · 06-05-2007, 17:52

why there is not a clear information about this TX2 an dflashing phones with that way.. I am still waiting help...

GUDO-GSM · 06-05-2007, 18:07

check ur cable..maybe modified ur cable...

harryzz · 06-05-2007, 20:51

Information is realy clear also have cable schematics
for N95 fbus flashing only with RX2
modify cable and all wil be OK.

br
harry

KUBAT1 · 06-06-2007, 10:09

for what all these nonsense informations, ofcourse I read all about N95 flashing and have cable schemaics. I modified the cable that's why I am asking...

harryzz · 06-06-2007, 10:16

i think that you realy don't solder 1 wire

if you proper connected RX2 you not get this error.
Please explain exactly what kind of information about RX2 you need ?????

br
harry

P.S.
specially for you i flash my phone again .....

Phone is in: Local mode
Model: RM-159 (Aalto (EU) )
V 06wk41v18.4/13-03-07/RM-159 (c) Nokia
IMEI: 3522xxxxxxxxxx0
Using Tx2 Data line.
BB5 PM back Phone is in: Phone is not responding!
Processing File: RM-159_11.0.026_PR.C0R
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
omap2420_m1_2nd.fg
OMAP2420 UNISTORE-II-1.5.1 ALG
teflon_sam_nand_xsr151_m1.fg
Backup: \GSM_3522xxxxxxxxxx.r3c
Erase RAP3 [00080000 - 007A07FD]
Erase RAP3 [00000000 - 0005FFFF]
Erase RAP3 [00880000 - 00FDFFFF]
Erase APE [00000200 - 0000AFFF]
Erase APE [0000B800 - 000AFFFF]
Erase APE [00000000 - 0001FFFF]
Erase APE [00080000 - 000BFFFF]
Erase APE [000E0000 - 0045FFFF]
Erase APE [004C0000 - 0073FFFF]
Erase APE [00A40000 - 0633FFFF]
Erase[110.94 MB]...
Waiting response for 320 Sec...in 2.06s
Flash[60.69 MB]...

KUBAT1 · 06-06-2007, 11:50

@harryzz

First time it show like yors and waited for erasing nearly half our. wait.. and wait.. then I reconected the box but nver could flash it anymore.

abuot cable. just connected pin2 of 10 pin RJ48 to 5th (rx2) of the connector.. between GND and BSI is 68K, and BSI cable connected with 7.5K. what to do more..?

gorandj · 06-08-2007, 21:54

mt cant flash n95 for now, u can do it with jaf
b.r.

ARBI · 06-08-2007, 21:59

N95 is tested on usb flashing and works 100%

regards

06-05-2007, 15:04	#1 (permalink)
KUBAT1 Registered User Join Date: Feb 2004 Location: MERSIN, TURKEY Posts: 1,260 Member: 55026 Status: Offline Thanks Meter: 53	N95 dead with FBUS flashing.Please help! I tried to flash N95 with MTBOX new v1.32, it started flash and wait for 320 sec. but it waited and waited 45 min. nothing happened, then I ended flashing with removing MTBOX usb cable, now always error. can anybody tell me how to revive the phone afternow.. Pleas ehlp urgent!!! Selected Highest installed version: 11.0.026 Using Tx2 Data line. Processing File: RM-159_11.0.026_PR.C0R Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg omap2420_m1_2nd.fg %%%%%%%% ERROR BOOTING: Using Tx2 Data line. Processing File: RM-159_11.0.026_PR.C0R Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg omap2420_m1_2nd.fg %%%%%%%% ERROR BOOTING: Using Tx2 Data line. Processing File: RM-159_11.0.026_PR.C0R Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg omap2420_m1_2nd.fg %%%%%%%% ERROR BOOTING: Using Tx2 Data line. Processing File: RM-159_11.0.026_PR.C0R Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg omap2420_m1_2nd.fg %%%%%%%% ERROR BOOTING: VPP is DISABLED. Using Tx2 Data line. Processing File: RM-159_11.0.026_PR.C0R Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg omap2420_m1_2nd.fg RAPIDOv102_2nd.fg RAPIDOv11_algo.fg omap2420_m1_2nd.fg %%%%%%%% ERROR BOOTING:[/COLOR]

06-06-2007, 10:16	#8 (permalink)
harryzz Freak Poster Join Date: Feb 2002 Location: BG Posts: 127 Member: 9216 Status: Offline Thanks Meter: 21	i think that you realy don't solder 1 wire if you proper connected RX2 you not get this error. Please explain exactly what kind of information about RX2 you need ????? br harry P.S. specially for you i flash my phone again ..... Phone is in: Local mode Model: RM-159 (Aalto (EU) ) V 06wk41v18.4/13-03-07/RM-159 (c) Nokia IMEI: 3522xxxxxxxxxx0 Using Tx2 Data line. BB5 PM back Phone is in: Phone is not responding! Processing File: RM-159_11.0.026_PR.C0R Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg omap2420_m1_2nd.fg OMAP2420 UNISTORE-II-1.5.1 ALG teflon_sam_nand_xsr151_m1.fg Backup: \GSM_3522xxxxxxxxxx.r3c Erase RAP3 [00080000 - 007A07FD] Erase RAP3 [00000000 - 0005FFFF] Erase RAP3 [00880000 - 00FDFFFF] Erase APE [00000200 - 0000AFFF] Erase APE [0000B800 - 000AFFFF] Erase APE [00000000 - 0001FFFF] Erase APE [00080000 - 000BFFFF] Erase APE [000E0000 - 0045FFFF] Erase APE [004C0000 - 0073FFFF] Erase APE [00A40000 - 0633FFFF] Erase[110.94 MB]... Waiting response for 320 Sec...in 2.06s Flash[60.69 MB]... Last edited by harryzz; 06-06-2007 at 10:39.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
my SE t250i dead with smart-clip please help me	hicham6600	Smart-Clip	3	12-10-2007 20:07
i300 dead after flashing with PDA FLASH. Please help	MindPower	Samsung Flashers, Software, Firmware.	0	08-07-2007 04:11
N90 dead with the hwk please help	wbiz10	HWK	19	01-21-2007 23:26
S700 dead with USB smart! Please help!!	KUBAT1	SonyEricsson (USB-Smart)	1	07-18-2006 21:12
Dead C35 after flashing..Please help me!	gsmsoft	x1x to x45/x50	2	11-20-2001 01:51

06-05-2007, 16:15	#2 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	do you have a conected TX2 line to cable? disble this option nad try

06-05-2007, 16:21	#3 (permalink)
KUBAT1 Registered User Join Date: Feb 2004 Location: MERSIN, TURKEY Posts: 1,260 Member: 55026 Status: Offline Thanks Meter: 53	what do you mean? disable TX2 from software or just disconnect RX2 pin?

06-05-2007, 17:52	#4 (permalink)
KUBAT1 Registered User Join Date: Feb 2004 Location: MERSIN, TURKEY Posts: 1,260 Member: 55026 Status: Offline Thanks Meter: 53	why there is not a clear information about this TX2 an dflashing phones with that way.. I am still waiting help...

06-05-2007, 18:07	#5 (permalink)
GUDO-GSM No Life Poster Join Date: Jan 2006 Location: INSIDE-SPT Posts: 1,982 Member: 216769 Status: Offline Sonork: 100.1576865 Thanks Meter: 225	check ur cable..maybe modified ur cable...

06-05-2007, 20:51	#6 (permalink)
harryzz Freak Poster Join Date: Feb 2002 Location: BG Posts: 127 Member: 9216 Status: Offline Thanks Meter: 21	Information is realy clear also have cable schematics for N95 fbus flashing only with RX2 modify cable and all wil be OK. br harry

06-06-2007, 10:09	#7 (permalink)
KUBAT1 Registered User Join Date: Feb 2004 Location: MERSIN, TURKEY Posts: 1,260 Member: 55026 Status: Offline Thanks Meter: 53	for what all these nonsense informations, ofcourse I read all about N95 flashing and have cable schemaics. I modified the cable that's why I am asking...

06-06-2007, 11:50	#9 (permalink)
KUBAT1 Registered User Join Date: Feb 2004 Location: MERSIN, TURKEY Posts: 1,260 Member: 55026 Status: Offline Thanks Meter: 53	@harryzz First time it show like yors and waited for erasing nearly half our. wait.. and wait.. then I reconected the box but nver could flash it anymore. abuot cable. just connected pin2 of 10 pin RJ48 to 5th (rx2) of the connector.. between GND and BSI is 68K, and BSI cable connected with 7.5K. what to do more..?

06-08-2007, 21:54	#10 (permalink)
gorandj Freak Poster Join Date: Jun 2002 Location: earth Age: 53 Posts: 168 Member: 13303 Status: Offline Thanks Meter: 11	mt cant flash n95 for now, u can do it with jaf b.r.

06-08-2007, 21:59	#11 (permalink)
ARBI No Life Poster Join Date: Dec 2003 Location: Canary Islands, Spain. Age: 39 Posts: 539 Member: 45456 Status: Offline Thanks Meter: 6	N95 is tested on usb flashing and works 100% regards