Why my mt-box nokia cannot flash goog N70? - GSM-Forum

xiakaijun · 10-23-2007, 05:50

this is logs:Phone is in: Local mode
Model: RM-99 (Rolf )
V 05wk07v41.5/14-08-06/RM-99 (c) Nokia.
Production serial number CPB472431
Product code 0529331
Module code
Basic production code 0524420
Flash code
Order number
Long production SN
MCU SW V 05wk07v41.5/14-08-06/RM-99/(c) Nokia.
HW 6001
PCI
RFIC 150a160e
DSP rolf_gsm_chn_05wk07v24
LCD 2721820
APE SW Core V 5.0635.2.5.3/04-09-06/RM-99/(C)Nokia
APE Variant 0H2
Retu 32
Tahvo 41
APE HW 256
APE ADSP SW 16053
Camera 0
IMEI: 357949000099298
WARNING: VPP pin is not connected, disabling VPP.
VPP is DISABLED.
Using Tx2 Data line.
BB5 PM back Phone is in: Local mode
IMEI: 357949000099298
Backup file: C:\Program Files\GriffinTeam\MT-Box\bb5bckup\RM-99_357949000099298.pm
Processing File: RM99_50635253.C0
Boot...
FAILED TO BOOT PHONE!!!
Make sure that phone is connected.
Phone is in: Phone is not responding, power on phone!
============= Set Flash mode for info =============
VBat is 4.00V

Vpp pin has 0.09V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
Boot...
Using Tx2 Data line.
Invalid response from RAP3 boot( cable problem/damaged RAP3 chip/damaged phone power circuit
============= Set FBus mode for info =============
VBat is 4.01V

Vpp pin has 0.10V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
Phone is in: Local mode
Model: RM-99 (Rolf )
V 05wk07v41.5/14-08-06/RM-99 (c) Nokia.
Production serial number CPB472431
Product code 0529331
Module code
Basic production code 0524420
Flash code
Order number
Long production SN
MCU SW V 05wk07v41.5/14-08-06/RM-99/(c) Nokia.
HW 6001
PCI
RFIC 150a160e
DSP rolf_gsm_chn_05wk07v24
LCD 2721820
APE SW Core V 5.0635.2.5.3/04-09-06/RM-99/(C)Nokia
APE Variant 0H2
Retu 32
Tahvo 41
APE HW 256
APE ADSP SW 16053
Camera 0
IMEI: 357949000099298
WARNING: VPP pin is not connected, disabling VPP.
VPP is DISABLED.
Using Tx2 Data line.
BB5 PM back Phone is in: Local mode
IMEI: 357949000099298
Backup file: C:\Program Files\GriffinTeam\MT-Box\bb5bckup\RM-99_357949000099298.pm
Processing File: RM99_50635253.C0
Boot...
FAILED TO BOOT PHONE!!!
Make sure that phone is connected.
FAILED to find USB Device.
Attach phone to usb port!
Switched to USB BUS
VPP is DISABLED.
Using Tx2 Data line.
BB5 PM back Phone is in: Phone is not responding!
Processing File: RM99_50635253.C0
Boot...
CONNECT PHONE to USB and Power ON phone!
Pooling for phone...

harim_1981 · 10-23-2007, 06:17

disable "use Tx2 line"

and try mate...

xiakaijun · 10-23-2007, 07:57

I tried,but no well.logs:Boot...
\\?\nmwcd#vid_0421&pid_0443&if_oth#6&7bd455&0&00#{ 4f919102-4adf-11d5-882d-00b0d02fe381}
FAILED TO BOOT PHONE!!!
Make sure that phone is connected.

harim_1981 · 10-23-2007, 09:11

try to use Fbus...cable...

911GT · 10-23-2007, 09:44

Yes you need to use FBUS cable. and check resistor series in BSI line - need to be 7.5k

xiakaijun · 10-23-2007, 12:59

my FBUS cable is 5 needles,not 7 needles,i must use 7 needles?

xiakaijun · 10-23-2007, 13:36

there is my flash logs with .........
NOT FOR THIS SECTION!!!!!! DOWN ANSWER IS RIGHT

harim_1981 · 10-23-2007, 14:46

same fbus cable can be used with MT too....

just unchecking the option "use tx2 line" u will get the same result...

momayaz · 10-24-2007, 01:08

try to use last flash file
the one you use is old
thats the problem

B.R.

xiakaijun · 10-24-2007, 10:17

why cannot entered local mode with FBUS cable?

911GT · 10-24-2007, 12:01

who you is in this business mate??????????????????????

please find answer of your question in forum. Havw more of 100 thread with this problem. Don't be lazy mate!!!

xiakaijun · 10-26-2007, 04:14

i am a new member,please give some links!why easy to flash with JAF,my new mt-box difficult?please help!

harim_1981 · 10-26-2007, 06:31

mate.....

being a new to MT....you should spend time for studying the procedures andcables schematics...

MT box is the best for Nokia....

ok.. let go thru the forum and all you need ends in MT...

10-23-2007, 05:50	#1 (permalink)
xiakaijun Freak Poster Join Date: Dec 2006 Posts: 468 Member: 407630 Status: Offline Thanks Meter: 36	Why my mt-box nokia cannot flash goog N70? this is logs:Phone is in: Local mode Model: RM-99 (Rolf ) V 05wk07v41.5/14-08-06/RM-99 (c) Nokia. Production serial number CPB472431 Product code 0529331 Module code Basic production code 0524420 Flash code Order number Long production SN MCU SW V 05wk07v41.5/14-08-06/RM-99/(c) Nokia. HW 6001 PCI RFIC 150a160e DSP rolf_gsm_chn_05wk07v24 LCD 2721820 APE SW Core V 5.0635.2.5.3/04-09-06/RM-99/(C)Nokia APE Variant 0H2 Retu 32 Tahvo 41 APE HW 256 APE ADSP SW 16053 Camera 0 IMEI: 357949000099298 WARNING: VPP pin is not connected, disabling VPP. VPP is DISABLED. Using Tx2 Data line. BB5 PM back Phone is in: Local mode IMEI: 357949000099298 Backup file: C:\Program Files\GriffinTeam\MT-Box\bb5bckup\RM-99_357949000099298.pm Processing File: RM99_50635253.C0 Boot... FAILED TO BOOT PHONE!!! Make sure that phone is connected. Phone is in: Phone is not responding, power on phone! ============= Set Flash mode for info ============= VBat is 4.00V Vpp pin has 0.09V, Not Connected Pins: Mbus 1, Box Tx 1, Box Rx 0, Bsi 0 Boot... Using Tx2 Data line. Invalid response from RAP3 boot( cable problem/damaged RAP3 chip/damaged phone power circuit ============= Set FBus mode for info ============= VBat is 4.01V Vpp pin has 0.10V, Not Connected Pins: Mbus 1, Box Tx 1, Box Rx 0, Bsi 0 Phone is in: Local mode Model: RM-99 (Rolf ) V 05wk07v41.5/14-08-06/RM-99 (c) Nokia. Production serial number CPB472431 Product code 0529331 Module code Basic production code 0524420 Flash code Order number Long production SN MCU SW V 05wk07v41.5/14-08-06/RM-99/(c) Nokia. HW 6001 PCI RFIC 150a160e DSP rolf_gsm_chn_05wk07v24 LCD 2721820 APE SW Core V 5.0635.2.5.3/04-09-06/RM-99/(C)Nokia APE Variant 0H2 Retu 32 Tahvo 41 APE HW 256 APE ADSP SW 16053 Camera 0 IMEI: 357949000099298 WARNING: VPP pin is not connected, disabling VPP. VPP is DISABLED. Using Tx2 Data line. BB5 PM back Phone is in: Local mode IMEI: 357949000099298 Backup file: C:\Program Files\GriffinTeam\MT-Box\bb5bckup\RM-99_357949000099298.pm Processing File: RM99_50635253.C0 Boot... FAILED TO BOOT PHONE!!! Make sure that phone is connected. FAILED to find USB Device. Attach phone to usb port! Switched to USB BUS VPP is DISABLED. Using Tx2 Data line. BB5 PM back Phone is in: Phone is not responding! Processing File: RM99_50635253.C0 Boot... CONNECT PHONE to USB and Power ON phone! Pooling for phone...

10-23-2007, 13:36	#7 (permalink)
xiakaijun Freak Poster Join Date: Dec 2006 Posts: 468 Member: 407630 Status: Offline Thanks Meter: 36	there is my flash logs with ......... NOT FOR THIS SECTION!!!!!! DOWN ANSWER IS RIGHT Last edited by 911GT; 10-23-2007 at 15:47.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My MT-BOX NOKIA can't flash phone HELP	wgmmmx	MT-BOX	18	09-14-2008 17:12
== i have a Problem with my Mt Box Nokia Please i Need Help !! ==	Faisal_Computer	MT-BOX	19	12-06-2007 20:58
MT-BOX Nokia can Flash N95?	Shayesta197	MT-BOX	8	10-08-2007 09:19
Why my MT-Box has zero credit in GTaccess 1.34	tical	MT-BOX	6	08-17-2007 09:44
Hi GT, Why release MT-pro,how about MT-box Nokia?	Ron2pet	MT-BOX	5	05-28-2007 10:36

10-23-2007, 06:17	#2 (permalink)
harim_1981 No Life Poster Join Date: Mar 2006 Location: tamilnadu, india. Posts: 2,319 Member: 243961 Status: Offline Sonork: 100.1591654 Thanks Meter: 104	disable "use Tx2 line" and try mate...

10-23-2007, 07:57	#3 (permalink)
xiakaijun Freak Poster Join Date: Dec 2006 Posts: 468 Member: 407630 Status: Offline Thanks Meter: 36	I tried,but no well.logs:Boot... \\?\nmwcd#vid_0421&pid_0443&if_oth#6&7bd455&0&00#{ 4f919102-4adf-11d5-882d-00b0d02fe381} FAILED TO BOOT PHONE!!! Make sure that phone is connected.

10-23-2007, 09:11	#4 (permalink)
harim_1981 No Life Poster Join Date: Mar 2006 Location: tamilnadu, india. Posts: 2,319 Member: 243961 Status: Offline Sonork: 100.1591654 Thanks Meter: 104	try to use Fbus...cable...

10-23-2007, 09:44	#5 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	Yes you need to use FBUS cable. and check resistor series in BSI line - need to be 7.5k

10-23-2007, 12:59	#6 (permalink)
xiakaijun Freak Poster Join Date: Dec 2006 Posts: 468 Member: 407630 Status: Offline Thanks Meter: 36	my FBUS cable is 5 needles,not 7 needles,i must use 7 needles?

10-23-2007, 14:46	#8 (permalink)
harim_1981 No Life Poster Join Date: Mar 2006 Location: tamilnadu, india. Posts: 2,319 Member: 243961 Status: Offline Sonork: 100.1591654 Thanks Meter: 104	same fbus cable can be used with MT too.... just unchecking the option "use tx2 line" u will get the same result...

10-24-2007, 01:08	#9 (permalink)
momayaz Freak Poster Join Date: Apr 2005 Location: Device unlocker Posts: 430 Member: 135532 Status: Offline Thanks Meter: 17	try to use last flash file the one you use is old thats the problem B.R.

10-24-2007, 10:17	#10 (permalink)
xiakaijun Freak Poster Join Date: Dec 2006 Posts: 468 Member: 407630 Status: Offline Thanks Meter: 36	why cannot entered local mode with FBUS cable?

10-24-2007, 12:01	#11 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	who you is in this business mate?????????????????????? please find answer of your question in forum. Havw more of 100 thread with this problem. Don't be lazy mate!!!

10-26-2007, 04:14	#12 (permalink)
xiakaijun Freak Poster Join Date: Dec 2006 Posts: 468 Member: 407630 Status: Offline Thanks Meter: 36	i am a new member,please give some links!why easy to flash with JAF,my new mt-box difficult?please help!

10-26-2007, 06:31	#13 (permalink)
harim_1981 No Life Poster Join Date: Mar 2006 Location: tamilnadu, india. Posts: 2,319 Member: 243961 Status: Offline Sonork: 100.1591654 Thanks Meter: 104	mate..... being a new to MT....you should spend time for studying the procedures andcables schematics... MT box is the best for Nokia.... ok.. let go thru the forum and all you need ends in MT...