FREE Solution to FLASH, REVIVE & UNLOCK C62 - Page 2 - GSM-Forum

JIPC · 04-22-2005, 09:21

Quote:

Originally Posted by CLIHALT

JIPC PLEASE DONT BLAME PEOPLE IF YOU HAVE NO KNOWNLEDGES HOW THE UNLOCK WOKS

Please read my post. The word 'BLAME' does not exist. Why do you insist I am blaming people? I only happen to revive my dead C62 with the help of some good links and users of this forum.

.:: SkyElectronic ::. · 04-22-2005, 09:57

problem is that ONLY YOU have try solution with success. and you posting that ONE day after NEW C62 Direct Unlocker. That is blaming!!!

BR, Milan

CLIHALT · 04-22-2005, 13:37

Quote:

Originally Posted by olos82

problem is that ONLY YOU have try solution with success. and you posting that ONE day after NEW C62 Direct Unlocker. That is blaming!!!

BR, Milan

Yes exactly Milan, post this "like" FREE solutin a day after c62 unlocker on the market is simly very pure try to blame people that exist free solution.

But it does not exist.

I think JIPC does not try his steps, only simply blame.

I viewed serial communication of griffin during boot and test cable. It only read phone memory and that error is that tryied to jump somewhere to flash (i expect they flash with the unlock button their code here).

BR CL

Stryker · 04-22-2005, 15:26

thanks JIPC for the solution! because i have here 1 c62 dead for a long time and now it's alive!!! i have tried many solutions with diffrent software versions but still dead.

now it's ok.

CLIHALT · 04-22-2005, 15:35

Quote:

Originally Posted by Stryker

thanks JIPC for the solution! because i have here 1 c62 dead for a long time and now it's alive!!! i have tried many solutions with diffrent software versions but still dead.

now it's ok.

AGAIN: this solution (except stupid steps with the griffin) can repair gdfs BUT CANNOT UNLOCK PHONE 25 ABOVE!!

BR CL.

higherzman · 04-22-2005, 15:49

i've repaired many dead and blinking C62 just flash it with flash programmer 2.78 with V28 that contain repair gdfs no need to direct unlock it

BR

CLIHALT · 04-22-2005, 16:39

Quote:

Originally Posted by higherzman

i've repaired many dead and blinking C62 just flash it with flash programmer 2.78 with V28 that contain repair gdfs no need to direct unlock it

BR

Yes for V28 repair gdfs exists too. But it has nothing to do with FREE UNLOCKING.

BR Cl.

JIPC · 04-23-2005, 06:05

Come on man, I only want to share something good and unusual with my dead C62 (not it's alive and working well) and you consider that blaming? You are telling me it only happened to me? Read the post with your eyes wide open! I believed this FREE SOLUTION will help lots of dead C62 and no way you can't stop it! As for free unlocking for C62 V28 and higher, just wait a little sooner till somebody post the FREE unlocking!

Ven0m · 04-25-2005, 05:11

@JIPC
thanks for sharing your solution. it may not work for some phones, but thanks for sharing. keep it up.

@CLIHALT
what is your problem? JIPC didn't blame anyone, he just shared his solution. if you have a grudge with him, PM him.

everyone is entitled to his own opinion.

regards,
ven0m

vinz4ever · 04-26-2005, 20:14

Quote:

Originally Posted by JIPC

Come on man, I only want to share something good and unusual with my dead C62 (not it's alive and working well) and you consider that blaming? You are telling me it only happened to me? Read the post with your eyes wide open! I believed this FREE SOLUTION will help lots of dead C62 and no way you can't stop it! As for free unlocking for C62 V28 and higher, just wait a little sooner till somebody post the FREE unlocking!

hi
i need help to flash c62
i have downloaded firmware n flasher
problem is it doesnt flash using cable
in diagram provided it says use 12 volts power supply with 50mA-100mA so how to limit power 12volt to 50mA i have a 12 volt adaptor
hope u can helpme to flash
I TRIED FLASHIN WITHOUT 12VOLTS SUPPLY BUT THEN IT SAYS SWITCH ON THE FONW WHICH CANT BE DOES AS ITS DEAD.
HOPE U CAN TELL HOW DID U USE 12VOLTS SUPPLY & HOW U LIMITED TO 5OmA AS MENSIONED ON THE DAIGRAM
regards
vinz

JIPC · 04-27-2005, 04:20

Quote:

Originally Posted by vinz4ever

hi
i need help to flash c62
i have downloaded firmware n flasher
problem is it doesnt flash using cable
in diagram provided it says use 12 volts power supply with 50mA-100mA so how to limit power 12volt to 50mA i have a 12 volt adaptor
hope u can helpme to flash
I TRIED FLASHIN WITHOUT 12VOLTS SUPPLY BUT THEN IT SAYS SWITCH ON THE FONW WHICH CANT BE DOES AS ITS DEAD.
HOPE U CAN TELL HOW DID U USE 12VOLTS SUPPLY & HOW U LIMITED TO 5OmA AS MENSIONED ON THE DAIGRAM
regards
vinz

I am using Regulated Power Supply and set to 9 Volts. I also use Universal Box as interface connection.

ASIC · 04-27-2005, 06:14

Quote:

Originally Posted by Ven0m

@JIPC
thanks for sharing your solution. it may not work for some phones, but thanks for sharing. keep it up.

@CLIHALT
what is your problem? JIPC didn't blame anyone, he just shared his solution. if you have a grudge with him, PM him.

everyone is entitled to his own opinion.

regards,
ven0m

I Agree With ven0m then someone want to promo and sell new software

ASIC

NetSpider · 04-29-2005, 10:34

Solution working!
I repair my blinking c62 ver28 !!!
Thanks

SoSimple · 04-30-2005, 14:12

What about direct unlock C62 v28?? I just read about repair it... I need the solucion for unlock C62 v28.

Regards

svukov21 · 04-30-2005, 21:34

@vinz4ever just use 10k resistor on your 12V

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Motorola em-28 solution for flash revive	el-polaco	Scout	10	05-10-2010 04:15
Is there any free solution to repair imei 099999-00-123456-0 in C62 ??	zahyr	NON Siemens Brand (ODM Phones)	20	12-16-2008 12:32
free solution to unlock c62 ver 26 27 28	Minos GSM	NON Siemens Brand (ODM Phones)	2	10-03-2005 14:32
any solution to flash c62 20c with international language	ivogsm	NON Siemens Brand (ODM Phones)	0	09-16-2004 15:34
free solution to flash / repair new V50 like F0.13.14	dani146	Motorola Old Legacy (EMMI)	2	10-21-2002 08:18

04-22-2005, 09:57	#17 (permalink)
.:: SkyElectronic ::. Freak Poster Join Date: Nov 2003 Age: 41 Posts: 359 Member: 43712 Status: Offline Thanks Meter: 3	problem is that ONLY YOU have try solution with success. and you posting that ONE day after NEW C62 Direct Unlocker. That is blaming!!! BR, Milan

04-22-2005, 15:26	#19 (permalink)
Stryker Freak Poster Join Date: Jun 2000 Location: In front of pc Posts: 308 Member: 1585 Status: Offline Thanks Meter: 15	thanks JIPC for the solution! because i have here 1 c62 dead for a long time and now it's alive!!! i have tried many solutions with diffrent software versions but still dead. now it's ok.

04-22-2005, 15:49	#21 (permalink)
higherzman No Life Poster Join Date: Dec 2003 Location: Paris, France Age: 45 Posts: 932 Member: 45387 Status: Offline Thanks Meter: 53	i've repaired many dead and blinking C62 just flash it with flash programmer 2.78 with V28 that contain repair gdfs no need to direct unlock it BR

04-23-2005, 06:05	#23 (permalink)
JIPC Freak Poster Join Date: Mar 2003 Location: Q.C. Age: 56 Posts: 226 Member: 23639 Status: Offline Thanks Meter: 2	Come on man, I only want to share something good and unusual with my dead C62 (not it's alive and working well) and you consider that blaming? You are telling me it only happened to me? Read the post with your eyes wide open! I believed this FREE SOLUTION will help lots of dead C62 and no way you can't stop it! As for free unlocking for C62 V28 and higher, just wait a little sooner till somebody post the FREE unlocking!

04-25-2005, 05:11	#24 (permalink)
Ven0m Freak Poster Join Date: Aug 1999 Location: Signal Posts: 232 Member: 424 Status: Offline Thanks Meter: 3	@JIPC thanks for sharing your solution. it may not work for some phones, but thanks for sharing. keep it up. @CLIHALT what is your problem? JIPC didn't blame anyone, he just shared his solution. if you have a grudge with him, PM him. everyone is entitled to his own opinion. regards, ven0m

04-29-2005, 10:34	#28 (permalink)
NetSpider Insane Poster Join Date: Jun 2002 Location: Belarus Age: 43 Posts: 88 Member: 13027 Status: Offline Thanks Meter: 0	Solution working! I repair my blinking c62 ver28 !!! Thanks

04-30-2005, 14:12	#29 (permalink)
SoSimple Freak Poster Join Date: Aug 2003 Location: Portugal Posts: 132 Member: 36698 Status: Offline Thanks Meter: 4	What about direct unlock C62 v28?? I just read about repair it... I need the solucion for unlock C62 v28. Regards

04-30-2005, 21:34	#30 (permalink)
svukov21 Freak Poster Join Date: Nov 2001 Location: UK,London Posts: 301 Member: 7251 Status: Offline Thanks Meter: 15	@vinz4ever just use 10k resistor on your 12V